Example photo by Franco Debartolo on Unsplash, not our project
Barnet · London
TV and media units in Rowley Green, Barnet
Built-in TV walls and media cabinets, for homes in Rowley Green. We make each piece in our workshop and fit it in your home.
- Set-top boxes stacked on a stand
- Empty alcoves beside the TV
- Somewhere to keep games tidy
TV and media units in Rowley Green
Flat-pack or bespoke?
Long shelves are where off-the-shelf often struggles. How much a shelf bends depends on its span, depth and load, and long runs need a thicker shelf, a lip along the front or a support. We design shelves with that in mind.
Off-the-shelf cupboards come in fixed sizes, so there’s normally a gap left over at the top or at one end. Furniture we make is built to the room’s own sizes, so it can run to the ceiling and fill the width.
TV and media units in Rowley Green
A built-in TV wall often needs sockets in new places, like behind the screen or in the equipment cupboard. That is work for your electrician. Ideally it’s done before the unit goes in so the sockets land in the right place. If your home has somewhere to keep games tidy and boxes and consoles on the floor, TV and media units made from moisture-resistant MDF and strong birch plywood, with a painted finish can solve it.
In a semi from the 1920s or 1930s, the front room typically has a bay at one end and a chimney breast on the side wall. Around Rowley Green, interwar houses, semis and detached homes make up a big part of the housing, so that layout is worth knowing well. We tend to plan TV and media units along the chimney breast wall so the bay keeps its light.
The furniture is made at our workshop after you have had the quote and decided to go ahead. The quote sets out the agreed design, materials and finish, so every detail can be checked first.
- Place
- Rowley Green (EN5)
- Borough
- Barnet
- Price
- Quoted for your room
- To begin
- Design visit, then a written quote
- Making
- Workshop-made, then fitted
- Boards and paint
- Painted MDF and birch ply
- When we fit
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Page updated
- 27 October 2026
Built-in living-room furniture in Rowley Green
Homes built between 1945 and 1972 make up about 35% of the housing in the area around Rowley Green, with about 33% built between 1919 and 1939, according to Valuation Office Agency council tax figures (2025). It’s a good starting point, though every room is still measured, as two homes of the same age rarely match. Near the centre of Rowley Green, Historic England’s list includes Trinders Lodge (Grade II), about 0.5 miles south-east. If you live in a listed building, fixing into or taking out original features like panelling can need listed building consent. It is worth speaking to the council’s conservation officer before the design is final. Red routes are run by TfL, with tight limits on where and when vehicles can stop. Where a home in Rowley Green is on or beside a main road, it helps to mention that at the design visit. That way we can plan where to load and unload.
Close to Barnet Gate Wood? TV and media units can be planned to frame a window with a view rather than block it. For a family home near Saffron Green Primary School, TV and media units can be planned with low cupboards for toys and higher shelves for everything else. If you live in a flat close to Elstree & Borehamwood station, the route in is measured not just the room, and the sections are sized to fit it.
Rowley Green is about 5 miles south-east of Finchley, in the London Borough of Barnet. Rowley Green is part of the area we cover, and the process is the same everywhere we work. Rowley Green is one of the places in Barnet where we make TV and media units, and the borough has 41 places on our list.
Postcode districts we cover here for TV and media units: EN5. Other places close to Rowley Green include Arkley (1 mile south-east) and High Barnet (2 miles east). Across the rest of Barnet, our area takes in Finchley (5 miles south-east), Barnet (3 miles east), Burnt Oak (3 miles south), East Finchley (5 miles south-east), Hendon (5 miles south) and Whetstone (4 miles south-east).
Local landmarks in Rowley Green
Around Rowley Green, we cover homes near Elstree University Technical College. The nearest railway station is Elstree & Borehamwood station, roughly 1.4 miles west of the centre. Other landmarks nearby include Spires Shopping Centre (1.8 miles east) and Hertfordshire Scout Museum (1.2 miles north). Not far away are Rowley Lodge Field.
Caring for painted furniture
Getting the most from TV and media units starts with the planning and carries on after fitting day. These are worth keeping in mind:
- Check each box’s guidance on ventilation and clearances
- Let us know about parking and access at the design visit
- List every box, console and speaker that needs a home
- Plan open spaces for anything controlled by a remote
Cupboard doors may settle slightly with use. Most hinges can be adjusted to bring a door back in line.
Avoid piling devices on one shelf because heat builds up between them. Give each its own space.
Questions from Rowley Green
I live near Elstree & Borehamwood station. Is that in your area?
Yes. We cover all of Barnet and the rest of London. To get started, you can use our contact form with some details about the room, and tell us about parking and access at the same time.
Is Rowley Green in the area you cover for TV and media units?
Yes. Rowley Green is one of the places we work, along with the rest of Barnet and London. To get started, you can fill in our short enquiry form with a few details.
What do you do at the measuring visit?
We take full measurements, look at the walls and floors and work through the design together. Access and parking are worth talking about too, and afterwards we send a written quote.
Will my boxes get too hot inside the unit?
Equipment gives off heat, so it needs air around it. The unit is planned with open backs or gaps where boxes go, rather than sealing it in a cupboard. Keep the vents clear once it is in use.
Should I send pictures?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot, particularly with rough measurements. You can send them when you use our contact form.
How long does it take to fit a TV unit?
How long fitting takes depends on the length of the TV wall and what it needs to hold, and your quote sets out the fitting days. We will talk you through what to expect beforehand.
Boards, parts and paint
Doors and drawer fronts
Drawers suit games, controllers and remotes. Fronts are painted to match the unit.
Birch plywood
Birch plywood is stiff and grips screws firmly, which suits shelves for heavy speakers and amplifiers.
Why bespoke in Rowley Green?
Bought units often have a single cable gap, but the wires still show between the stand, the wall and the screen. We plan the cable routes into the design. Walls in interwar houses are straighter than in older ones, but rarely perfect, and standalone units can lean or gap. Fitted furniture is scribed and levelled on site.
Rooms that are not square take more work: walls that lean, floors that slope and sloping ceilings all mean more scribing and cutting. The quote allows for it, written once we have measured up.
Why us?
- A design visit, then a quote in writing
- Made in our workshop, then fitted in your home
- Every London borough and the City of London covered
- Saturday work by arrangement
Read how bespoke compares with ready-made or what to look for in a quote.
What happens on fitting day
In older rooms, the furniture typically has to meet skirting, picture rails, cornice or coving. We cut and scribe the furniture around them on site, so it sits neatly against the room. How long the fitting takes depends on the length of the TV wall and what it needs to hold, and we confirm the fitting days in your quote. In a 1930s house with a converted loft, the stairs to the loft room are often steeper than the main flight, so pieces for a loft room are sized for the narrowest point. The main stairs in houses of that age are typically straighter. Each section is assembled and fixed in the room.
- You get in touch and list what the unit has to take: the screen, boxes, consoles and speakers.
- At the design visit we measure the wall and plan cable routes and ventilation, as set-top boxes, consoles and amplifiers need air. If you need new sockets, your electrician should do that before fitting.
- Your written quote sets out the design, materials and finish.
- We build the unit in our workshop from moisture-resistant MDF and birch plywood, leaving routes for cables and gaps for air.
- We fit it in your home and leave the cable routes ready for you to use.
Before we arrive
- Keep pets out of the room and the hallway
- If you live in a block, book the lift and tell the building manager
- Move anything in the hall or on the stairs out of the way
Arranging a design visit
Pictures help us understand the room before we visit. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space, particularly with rough sizes. To send them over, tell us about the room on our contact form, and we will arrange a design visit.