Example photo by Franco Debartolo on Unsplash, not our project
Barnet · London
TV and Media Units in Burnt Oak
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. Our work on TV and media units in Burnt Oak starts with a design visit, and everything is made at our workshop.
- Games, controllers and remotes everywhere
- Cables trailing across the wall
- Wasted space around the screen
TV and media units for your home in Burnt Oak
TV and media units for homes in Burnt Oak
Media equipment warms up as it runs, so equipment can’t simply be shut in a closed cupboard. We plan ventilation into the unit, with open backs, gaps or vented doors where they’re needed. It’s worth checking each maker’s guidance on clearances. Typical reasons to get in touch are equipment running hot in a closed cupboard and somewhere to keep games tidy; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
Around Burnt Oak, with interwar houses or semis making up much of the housing, the main room is often well proportioned, with a bay, a chimney breast and not many other recesses. That leaves room for TV and media units in the alcoves, along a full wall or around the chimney breast, depending on how you use the room. The carcasses are made from moisture-resistant MDF or birch plywood, painted in a colour agreed with you.
The quote names the materials: moisture-resistant MDF and birch plywood, each used where it suits the job. The finish is stated too, whether that’s spray painting or hand painting.
- Location
- Burnt Oak (HA8, NW9, NW7)
- Borough
- Barnet
- Price
- Quoted for your room
- First step
- A design visit: we measure and talk it through
- Where it’s made
- Workshop-made, then fitted
- Made from
- Painted MDF and birch ply
- Fitting days
- Weekdays (Saturdays if arranged)
- Enquiries
- The contact form
- Last updated
- 27 October 2026
What happens on fitting day
At the end, we tidy up and take up the floor coverings. Before we leave, we go over the finished piece together. How long fitting takes depends on the size of the unit and the cable routes planned into it, and we confirm the fitting days in your quote. Semis and detached houses often have a front path or a side gate, which can make carrying in easier. Gates, paths and steps up to the door are part of the route we measure. Floors are covered from the door to the room.
- You get in touch with details of the room and where it is in your home.
- At the design visit we measure the wall and also the hall, stairs and doorways the unit has to pass through.
- A written quote follows, setting out the design, materials and finish.
- In our workshop we make the unit in sections from moisture-resistant MDF and birch plywood.
- We bring the sections in, join them on the wall and scribe them to fit. The finish is sprayed beforehand or painted by hand on site.
Preparing the room
- Book any lift and let the concierge or building manager know
- Move anything in the hall or on the stairs out of the way
- Clear the area where the furniture is going
Starting with a design visit
You don’t need exact measurements to get started. Everything is measured properly when we visit, along with the walls, floor and ceiling. To arrange it, drop us a line using the contact form. The written quote follows the visit.
Related advice
Questions from Burnt Oak
Can you make TV and media units for a home in Burnt Oak?
Yes, Burnt Oak is within the area we cover, which takes in all of Barnet and the rest of London. We start with a design visit to measure the room and talk through what you need, and then we send a quote.
Does a conservation area in or near Burnt Oak affect fitted furniture?
Normally not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
What if my walls and floors are out of level?
Walls and floors that aren’t true are part of the job in older homes. The furniture is scribed to follow the walls and levelled on feet or a plinth.
Do I need to be in when you fit?
We need someone to let us in at the start of the day. It’s good to have someone there at the end to look over the work with us.
Do you work on Saturdays?
Yes, by arrangement. Let us know when you get in touch if a Saturday suits you best.
What if the stairs or lift are small?
It’s made in sections, each one sized to fit the way in. At the design visit, we measure the route not just the room.
More for homes in Burnt Oak
TV and media units for homes in Burnt Oak
Homes built between 1919 and 1939 make up about 49% of the housing in the area around Burnt Oak, with about 23% built between 1973 and 1999, based on the Valuation Office Agency’s 2025 council tax data. That matters for TV and media units, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. Burnt Oak is partly covered by the Watling Estate Conservation Area, according to Historic England’s records. Conservation area rules mainly cover the outside of buildings, so fitted furniture inside a house does not normally need planning permission. The council can confirm if you’re not sure. More than a third of the homes in the neighbourhood around Burnt Oak (about 49%) date from between 1919 and 1939, going by the Valuation Office Agency’s 2025 council tax figures. Houses from the 1920s and 1930s often have a bay window and a chimney breast in the front room, and TV and media units are planned around both.
Close to Watling Park? A room that looks out on trees deserves a design that leaves the window alone. If your children go to The Annunciation RC Junior School or a school nearby, TV and media units can be planned with low cupboards for toys and higher shelves for everything else.
Burnt Oak is about 3 miles east of Finchley, within the London Borough of Barnet. Design visits and fitting in Burnt Oak can be on a Saturday, by arrangement. Our work takes in places right across Barnet, from the busiest high streets to quiet residential roads.
We make TV and media units across the HA8, NW9 and NW7 postcode area for TV and media units. If your home is on a street such as East Road, Back Lane and Rill Lane, or close by, we can visit to measure up for TV and media units. Burnt Oak is near the A5100, so if your home is on a main road, mention it when you get in touch. Neighbouring places we cover for TV and media units include The Hale (1 mile north), Edgware (1 mile north-west), Grahame Park (1 mile south-east), Little Stanmore (1 mile west) and Canons Park (1 mile west). Across the rest of Barnet, our area takes in Finchley (3 miles east), Barnet (4 miles north-east), East Finchley (4 miles east), Hendon (2 miles south-east), Whetstone (4 miles east) and Friern Barnet (5 miles east). Burnt Oak is among the bigger places we cover in Barnet.
Around Burnt Oak
Around Burnt Oak, we cover homes near Railway Hotel, The Northgate School and St Martin's School Brentwood. For rail, the closest station is Mill Hill Broadway station, roughly 0.5 miles north-east. A little further out are Edgware Community Hospital (0.5 miles west) and Broadwalk Centre (0.7 miles west). For a walk, there is Mill Hill Old Railway Nature Reserve.
Flats, conversions and leaseholders
Many London terraces have been converted into flats, and that often means a shared hallway and a tight turn on the stairs. Each section is sized with that in mind, once we have measured the way in.
If your flat is leasehold, check your lease before fixing furniture to the walls. A lease can require consent from the building owner for alterations, and that’s best sorted before fitting day. We can’t advise on your lease, so check it yourself or ask your managing agent.
Do you need TV and media units in Burnt Oak?
Upgrading to a bigger screen is a common trigger. The old stand no longer suits it, or the screen takes over the room. A unit around it puts it in proportion.
A few of the things people ask us to solve include:
- Equipment running hot in a closed cupboard
- Clutter around the TV
- Bought furniture that doesn’t suit the room
- Alcoves either side of the chimney breast going to waste
Near listed buildings like John Keble Church, under half a mile north of the centre of Burnt Oak, older homes may keep original joinery that TV and media units can be designed around. If your own home is listed, check with the council before fixing into original features.
Questions to ask before you hire anyone
- Which parts of the job need an electrician or a plumber
- Whether they can show you real projects they’ve done
- Whether you’ll get a quote in writing, not just a figure
- Have they measured the stairs, lift and doorways?
Boards, parts and paint
Birch plywood
Birch plywood is strong and holds screws well, so it is good for shelves that carry equipment and speakers.
Hand-painted finish
Hand painting often suits units in older houses. The colour is agreed with you.
Before and after fitting day
None of this takes much effort. Here’s what we suggest:
- Let us know about parking and access at the design visit
- Plan any new sockets with your electrician before fitting
- Check where the seating will go
- Note which boxes need line of sight for their remotes
Use the access panels and cable routes when you add or change leads. It keeps the unit tidy.
Label cables when you set things up to make future changes easier.