Example photo by Pete Alexopoulos on Unsplash, not our project
Camden · London
Alcove units in Camden Town, Camden
In Camden Town, we design alcove units around the room you actually have. We design your alcove unit at a visit to your home, make it in our workshop and fit it.
- Empty alcoves either side of the chimney breast
- Alcoves that aren’t square
- Somewhere to keep books and records
Ask about alcove units in Camden Town
The problems alcove units solve
Sometimes there are old units already, worn, badly fitted or the wrong size for how you live. Starting again lets you rethink the layout, from the doors to what goes inside.
Here are some of the needs we’re asked about most:
- Bare alcoves beside the fireplace
- Standard units leaving gaps at the sides
- Worn or badly fitted alcove units
- Everyday clutter left on show
The wider area includes historic houses like Winfield House, about 1.2 miles south-west. If your own home is a period one, the alcoves beside a chimney breast are the natural place for alcove units.
Before you choose who makes it
- How they’ll get the furniture into the room
- Will the quote be in writing?
- Which materials they’ll use, named in the quote
- Real projects you can actually look at
Alcove units in Camden Town
We work across London, including Camden Town. The first step is a design visit to measure the alcoves and agree the layout. After that we send a written quote; the units are then built in our workshop and fitted in your home. We make alcove units from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and people most often get in touch about furniture that doesn’t fit the alcove and bare alcoves beside the fireplace.
Most households around Camden Town live in purpose-built flats, from mansion blocks to modern developments. In a mansion block flat, the living room may still have a chimney breast and alcoves, and walls that are far from flat, whereas a modern flat tends to have plasterboard walls and an open-plan layout. Alcove units are designed for whichever you have.
The written quote is your record of the job. It sets out the alcove unit designed for your room, what it is made from and how it’s finished, and the workshop works from it.
- Where
- Camden Town (NW1, N1C, NW5, NW3)
- Borough
- Camden
- Cost
- Quoted for your room
- First step
- We visit, measure, then quote
- Made
- In our workshop, then fitted in your home
- Materials and finish
- Painted MDF and birch ply
- When we fit
- Weekdays (Saturdays if arranged)
- Enquiries
- The contact form
- Last updated
- 27 October 2026
How it is made
Plinths and scribe strips
The plinth raises the unit and takes up uneven floors. Its height can match the skirting board for a tidy finish.
Birch plywood
Birch plywood is strong and holds screws well, so it is ideal for shelves and the boxes behind the doors. Its layered edge can be painted or left to show.
What alcove units can’t fix
Electrics, plumbing, gas, plastering and structural work aren’t part of what we do. There are a few other points to bear in mind:
- New sockets or wiring (your electrician handles those)
- Painting the walls, ceiling and woodwork around the units
- Plastering or repairing loose plaster in the alcoves
If in doubt, you can send us a few details through our contact form and describe the room before you arrange a visit. How a job runs, step by step.
What goes into it
- Birch plywood
- Moisture-resistant MDF
- Spray-painted finish
- Adjustable shelves
- Hand-painted finish
- Panelled or flat doors
- Scribed side panels
Your questions about alcove units in Camden Town
Do you make alcove units for homes in Camden Town?
Yes, Camden Town is within the area we cover, which takes in all of Camden and the rest of London. We start with a design visit to measure the room and talk through what you need, followed by a quote.
I live near Camden Road station. Is that in your area?
Yes. We cover all of Camden and the rest of London. You can get in touch through our contact form to arrange a design visit.
What affects the price of alcove units?
It depends on the size, the number of doors and drawers, the internal fittings and the finish, along with access and parking. We send a quote in writing after the design visit.
How do I get a quote?
Just get in touch through our contact form. It is useful to send rough measurements and a few pictures, and we’ll arrange a design visit, followed by a written quote.
Who moves the sockets behind the alcove units?
We don’t do electrical work. New or moved sockets are a job for your electrician, ideally before fitting, and some electrical work in homes is covered by Part P of the Building Regulations. We plan the units around the sockets, with cut-outs where needed.
Can I send photos ahead of the visit?
Yes. They give us a feel for the space before we visit, along with rough sizes. Show anything the furniture has to work around, like radiators or sockets.
Living-room carpentry in Camden Town: local notes
In the streets around Camden Town, the largest groups of homes date from before 1919 (about 40%) and the years since 2000 (about 22%), on the Valuation Office Agency’s council tax figures for 2025. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. The centre of Camden Town is within about a quarter of a mile of the Regent's Canal Conservation Area. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house does not normally need permission. If you are unsure, check with the council before work starts. London’s red routes are run by TfL, and stopping on them is tightly controlled. If you live on or close to a main road in Camden Town, let us know during the design visit. It lets us plan the stop before fitting day.
For families living near Our Lady Roman Catholic Primary School, a cupboard for board games and a shelf for reading books can go into the same design. Living in a block of flats near Camden Road station? Then check any building rules on lifts and working hours early, and the sections will be sized for the way in.
Camden Town is part of the London Borough of Camden, about 1 mile south-east of St Pancras. Wherever you are in Camden Town, it works the same way: a design visit, a quote in writing, furniture built in our workshop and fitting in your home. Camden Town is one of 28 places on our list for Camden.
Every home in NW1, N1C, NW5 and NW3 is within our area for alcove units, from the main roads to the quieter streets. Streets in the area include Camden High Street, Greenland Road and Camden Road, and we cover homes on all of them for alcove units. The A400 and B512 runs close to Camden Town, so if your home is on a main road, mention it when you get in touch. Other places close to Camden Town include Agar Town (1 mile east), Kentish Town (1 mile north-west), Chalk Farm (1 mile north-west), Somers Town (1 mile south-east) and Primrose Hill (1 mile west). Other parts of Camden we cover include Hampstead (2 miles north-west), West End (2 miles south), St Giles (2 miles south), Seven Dials (2 miles south), West Hampstead (2 miles north-west) and Holborn (2 miles south-east).
Landmarks near Camden Town
In Camden Town, that includes homes near The Camden School for Girls, Vaughan Williams Memorial Library and North Bridge House School, among other places. Camden Town has its own railway station: Camden Road station. Well-known places in the area include St Pancras Hospital (0.5 miles south-east) and Central Saint Martins Museum & Study Collection (0.7 miles south-east). Green spaces nearby include Primrose Hill and Adelaide Nature Reserve.
Also near Camden Town
What else we make in Camden Town
Flats, conversions and leaseholders
Some blocks ask for notice before trades arrive, often through a building manager or concierge. Lifts sometimes need to be booked, and the lift size helps decide how big each section can be. Tell us about it when you get in touch.
If you live in a flat, getting the furniture in is planned from the start. At the design visit, we measure the stairs, the landings, any lift and the doors, so the furniture can be made in sections that fit through without a struggle.
Fitting day, step by step
Fitting day follows a set order: we protect the floors, bring the sections in, set them level, scribe them to the walls, fix them and finish them. At the end, we tidy up and go over the work with you. How long fitting takes depends on the size of the alcoves and what goes in them, and we confirm the fitting days in your quote. Many blocks have entry systems, concierge desks or rules on booking the lift, so check them with the managing agent before fitting day. Floors in the flat and the common parts are protected while the furniture comes in.
- You get in touch and tell us about the room and the alcoves.
- At the design visit, we measure each alcove and go through the layout with you.
- You receive a written quote setting out the units, materials and finish, for you to read through at your own pace.
- Each unit is built in our workshop to the measurements we took, ready for a spray-painted finish or for hand painting on site.
- We install the units, set them level and scribe them to the alcoves, so they sit tight to the chimney breast.
How to prepare
- Clear the hallway and stairs so the sections can come through
- Check the building’s rules for trades and lift bookings
- Clear the area where the furniture is going
Arranging a design visit
You do not need exact measurements to get started. We measure everything properly at the measuring visit, including how level the floor and ceiling are. To arrange it, get in touch through our contact form with some details about the room. You receive a written quote after the visit.