Example photo by Pete Alexopoulos on Unsplash, not our project
Hillingdon · London
Alcove units in Yiewsley, Hillingdon
We make alcove units for homes in Yiewsley, designed around the room you have. We design your alcove unit at a visit to your home, make it in our workshop and fit it.
- Clutter with nowhere to go
- A desk that tucks into an alcove
- Worn or badly fitted alcove units
Alcove units in Yiewsley
Alcove units in Yiewsley: what you get
One alcove can be given over to a desk, with shelves above and a drawer or cupboard below. It gives you a place to work without turning a room into an office. Desk height and depth are agreed with you, with a gap or hole planned so cables can reach the sockets. Typical reasons to get in touch are worn or badly fitted alcove units and alcoves that aren’t square, and the answer is built in our workshop from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
Windows, doors, radiators and sockets decide where furniture can and can’t go. In any home in Yiewsley, those set the layout for alcove units before anything else. After that, the mix of cupboards, shelves and open space follows how you live, and the paint colour is agreed with you.
The written quote puts the design visit in writing: the layout, what goes inside, the materials used and the finish. If you’d like to change anything, it’s easier before the furniture is made.
- Place
- Yiewsley (UB7, UB8)
- Borough
- Hillingdon
- Cost
- Quoted for your room
- First step
- Design visit, then a quote in writing
- Made
- Workshop-made, then fitted
- Made from
- Painted MDF and birch ply
- When we fit
- Monday to Friday; Saturdays by arrangement
- Enquiries
- Send us a message
- Last updated
- 27 October 2026
FAQs: alcove units in Yiewsley
Can parking be tricky on fitting day in Yiewsley?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you during the design visit.
Can you make alcove units for a home in Yiewsley?
Yes, we work across Hillingdon, Yiewsley included, and across the rest of London. You can send us a few details through our contact form to arrange a design visit.
Do I need to be in when you fit?
We need someone to let us in at the start of the day. It’s good to have someone there at the end to look over the work with us.
Do alcove units affect the chimney’s ventilation?
We design around any vent so it stays open. Air moving through a capped chimney helps stop damp, which protects the units as well as the wall. If there’s damp on the breast already, it is best sorted before fitting.
Are alcove units spray painted or hand painted?
There are two options: a spray-painted finish done in our workshop, or a hand-painted finish done on site. Both are in a colour agreed with you. Spray painting is smooth and even, while hand painting is easy to touch up.
How tall should alcove units be?
That is your choice. Some people take the units right to the ceiling for the most storage, while a low cupboard with shelves above keeps the room feeling lighter. We’ll go through what suits your room when we visit.
Nearby places to Yiewsley
More for homes in Yiewsley
Alcove units for homes in Yiewsley
About 27% of the homes in the area around Yiewsley went up between 1945 and 1972, and about 25% between 1973 and 1999, on the Valuation Office Agency’s council tax figures for 2025. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Entries on the National Heritage List near the centre of Yiewsley include The De Burgh Arms Public House (Grade II), about 0.6 miles south-west, and The Railway Arms Public House (Grade II), about 0.6 miles south-west. If your own home is listed, changes inside that alter its character, like fixing into or removing original joinery, may need listed building consent. The council’s conservation officer is the person to ask before work starts. Each London borough runs its own parking controls, and Hillingdon is no exception. If your street in Yiewsley is in a controlled parking zone, a visitor permit, a paid bay or a parking bay suspension through the council may be needed. Let us know about parking during the design visit.
If your home is one of the older houses near St Matthew's, walls that bow and floors that slope are why alcove units are scribed to fit rather than pushed into place. If your children go to Rabbsfarm Primary School or a school nearby, shelving with deep cupboards below keeps books, games and school things in one place. Living in a block of flats near West Drayton station? Then the lift, the stair turns and the front door all set the largest piece that can come in.
Yiewsley is about 5 miles north-east of Ruislip, within the London Borough of Hillingdon. Anywhere in Yiewsley, it works the same way: a design visit, a quote in writing, furniture made in our workshop and fitting in your home. We list Yiewsley among 17 places we cover in Hillingdon.
In UB7 and UB8, the process is the same as anywhere else in London. Streets in the area include High Street, Castle Avenue and Kingston Avenue, and homes on each of them are within our area for alcove units. Yiewsley sits close to the A408. Other places close to Yiewsley include West Drayton (1 mile south), Cowley (1 mile north-west), Hillingdon (2 miles north-east) and Hayes (2 miles east). Elsewhere in Hillingdon, we also cover Ruislip (5 miles north-east), Yeading (3 miles east), Yiewsley (3 miles east), Ruislip Manor (5 miles north-east), South Ruislip (4 miles north-east) and Ruislip Gardens (4 miles north-east).
Around Yiewsley
Around Yiewsley, we cover homes near George and Dragon pub and Stockley Academy and the streets around them. For rail, the closest station is West Drayton station, roughly 0.5 miles south-west of the centre. Nearby you’ll also find Hillingdon Hospital (0.7 miles north) and British Airways Heritage Collection (1.7 miles north-west).
Looking after your furniture
Painted fitted furniture is easy to look after with a little care. A few things help it stay looking good:
- Deal with any damp on the chimney breast first
- Mention parking and access when we visit
- Make the alcoves easy to reach for measuring
- Think about what you’ll store before we meet
Keep any chimney vent clear once the units are in, even when the cupboards fill up. Ventilation helps keep the chimney breast dry, which protects the units too.
Spread heavy loads and keep the heaviest things on lower shelves. Overloaded shelves are the main cause of sagging.
Boards, parts and paint
Plinths and scribe strips
Scribe strips are the edges we trim on site to follow the wall. This closes the gap between a straight unit and a bowed alcove.
Hand-painted finish
A hand-painted finish can be done on site, after the units are fitted. Small marks are easy to touch up.
Where other trades come in
Damp treatment and building work are for other specialists, and there are a few other limits too:
- Finding and fixing the cause of damp
- Electrical work, like new sockets or switches, which is for your electrician
- Decorating the rest of the room
Not sure whether your space suits alcove units? You can use our contact form and we will tell you before you arrange a visit. How a job runs, step by step.
What it’s made from
- Spray-painted finish
- Moisture-resistant MDF
- Panelled or flat doors
- Hand-painted finish
- Scribed side panels
- Adjustable shelves
- Birch plywood
What affects the price in Yiewsley
Several things affect the price:
- Access to the room, like stairs, lifts and narrow halls
- Parking near your home
- The finish: spray painted or hand painted
- What goes inside: rails, shelves, drawers and dividers
Rooms that aren’t square take more work: walls that lean, floors that slope and sloping ceilings all mean more scribing and cutting. That’s reflected in the quote.
What we need to know
Before the design visit, it helps us to know about:
- How you want to use the space
- The type of home and how the room is reached
- Examples of the look you are after
- Anything fixed to the wall that the furniture needs to work around
The quote is built from the design visit. We measure the room properly, check how the walls and floors run and talk through the design with you. Afterwards, we send a written quote for you to look over. To book one, get in touch through our contact form.
How fitting day works
Fitting day follows a set order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. Then the room is tidied and we look over the work with you. How long fitting takes depends on how many alcoves there are and how tall the units go, and your quote sets out the fitting days. London parking ranges from controlled zones to driveways and private bays, so let us know what’s near you during the design visit. For a flat, building rules on lifts and working hours are worth checking.
- You contact us with a few details about the chimney breast and alcoves.
- We visit to measure the alcoves top, middle and bottom, and check the floor for level.
- We send the design, materials and finish in a written quote.
- In our workshop the units are made from moisture-resistant MDF and birch plywood, with a little extra left on the edges that meet the wall.
- At fitting, we set each unit level on a plinth or feet and trim that edge to follow the wall.
How to prepare
- Make sure pets are kept safely away
- Take down pictures, mirrors and shelves from the wall
- Arrange any electrical changes with your electrician beforehand
How to get a quote
To make a start, drop us a line using the contact form and let us know which room you have in mind and what you want the furniture to do. From there, we arrange a design visit to measure up and talk through your ideas, and a quote in writing follows.