Example photo by Decima Athens on Unsplash, not our project
Kingston upon Thames · London
Bespoke kitchens in Malden Rushett, Kingston upon Thames
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. Our work on bespoke kitchens in Malden Rushett starts with a design visit, and everything is made at our workshop.
- A painted dresser for the kitchen
- A larder for food and small appliances
- A kitchen island with room around it
Bespoke kitchens designed for your room
Kitchens in Malden Rushett: local notes
The biggest shares of homes in the streets around Malden Rushett were built between 1945 and 1972 (about 45%) and between 1919 and 1939 (about 23%), based on the Valuation Office Agency’s 2025 council tax data. That matters for kitchens, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. Entries on the National Heritage List near the centre of Malden Rushett include Rushett Farmhouse (Grade II), less than half a mile south-east. For a listed home, works inside that affect its character can require listed building consent from the council, for instance removing or fixing into original panelling. Check with the council’s conservation officer first. Controlled parking zones are run by the boroughs, so the rules in Kingston upon Thames are set locally. Where a street in Malden Rushett is controlled, a van may need a visitor permit, a paid bay or a bay suspension from the council. We ask about parking at the measuring visit, so the day can be planned around it.
Close to Claygate Common? A cupboard by the back door for boots and coats can be built in with the kitchen. If your children go to Chessington Community College or a school nearby, a kitchen with a spot for school letters and lunch boxes makes mornings easier. For a flat near Chessington South station, it’s useful to book the lift and tell the concierge before fitting day.
Malden Rushett is within the Royal Borough of Kingston upon Thames, about 5 miles north of Kingston upon Thames. Homes in Malden Rushett are part of the area we cover for bespoke kitchens, as part of our work in every London borough. Across Kingston upon Thames, we cover Malden Rushett.
Postcode districts we cover here for bespoke kitchens: KT9. Our area takes in homes on streets like Silverglade, Leatherhead Road and West Road, whether you want bespoke kitchens or another piece made for the room. If you are just outside Malden Rushett, we also cover Barwell (1 mile north) and Hook (2 miles north). Elsewhere in Kingston upon Thames, we also cover Kingston upon Thames (5 miles north), Surbiton (4 miles north), New Malden (5 miles north-east), Hampton Wick (5 miles north), Norbiton (5 miles north) and Chessington (2 miles north-east).
Near you in Malden Rushett
The nearest railway station is Chessington South station, roughly 1.3 miles north. Nearby you’ll also find Epsom Cottage Hospital (0.8 miles east) and Chessington Castle Hill (1.8 miles north-east). Open spaces near Malden Rushett include Jubilee Wood.
About our bespoke kitchens in Malden Rushett
You choose the worktop, sink and appliances, and we design the cabinets around them. Knowing the appliance sizes early lets us leave the right spaces, so everything fits as it should. The materials and finish are agreed in your quote. People typically come to us about a kitchen for a room that isn’t square and tall larder storage; the furniture is made from moisture-resistant MDF and strong birch plywood, with a painted finish.
Around Malden Rushett, interwar houses or semi-detached and detached homes make up a good part of the housing. Many 1930s houses started with a small kitchen at the back that has since been extended or knocked through. The cabinets are designed for the room as it is today, with an island where space allows.
After the design visit, we send you a quote in writing. It sets out the design we have talked through, the materials and the finish.
- Location
- Malden Rushett (KT9)
- Borough
- Kingston upon Thames
- Price
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Made
- Workshop-made, then fitted
- Boards and paint
- MDF and birch plywood, painted
- When we fit
- Weekdays; Saturdays on request
- Enquiries
- Our contact form
- Page updated
- 27 October 2026
Also near Malden Rushett
More for homes in Malden Rushett
How fitting works for bespoke kitchens
When we arrive on fitting day, the first job is covering the floors and protecting the way in from the front door. The sections made in our workshop come in next. The time the fitting takes depends on the size of the kitchen and the design, and the fitting days are agreed in your quote. It helps to clear the room and the route before we arrive. Fitting day starts with protecting the floors and setting out the pieces. Each piece is levelled, scribed where the wall wanders and fixed to suit the wall.
- You contact us about a bespoke kitchen.
- At the design visit we plan the kitchen and talk about colours and finish.
- A quote in writing follows, with the finish agreed.
- The cabinets are built in our workshop from moisture-resistant MDF and birch plywood, and a spray finish is applied there for a smooth, even surface.
- The kitchen is fitted and scribed to the walls, with any hand painting done in the room.
- Treat new paint gently while it cures; the plumbing, gas and electrics are done by your own plumber, a Gas Safe registered engineer and your electrician.
How to prepare
- Clear the hallway and stairs so the sections can come through
- Take anything hanging off the wall we’re fitting to
- Let us know if your street is in a controlled parking zone
Starting with a design visit
Photos help us understand the room before we visit. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space. To share them, fill in our short enquiry form, and we’ll suggest a time for a design visit.
Advice
Practical tips
Looking after painted furniture is simple. These habits help most:
- Deal with damp walls first
- Know your appliance sizes early
- Make a note of what you use every day
- Think about how the cabinets will get in
Don’t leave water sitting on painted cabinets, particularly near the sink. Moisture-resistant MDF copes well, but standing water is best avoided.
Leasehold flats can have rules about alterations, so check your lease early. We cannot advise on your lease.
Flats, blocks and rented homes
Conversions and newer flats often have stud walls rather than solid brick. Fixings are chosen to suit whatever the wall is made of, which we check at the measuring visit.
We also make and fit furniture for landlords furnishing a let, often to make the most of a small or awkward room. The materials are the same as for any home: moisture-resistant MDF and birch plywood, finished by spray or by hand.
Bespoke or off-the-shelf?
Neither choice is right for every home. In a simple modern kitchen, off-the-shelf can be enough. Where the room is tricky, the house is older or you want a painted kitchen that suits it, bespoke is normally worth considering. Doors, windows and radiators rarely leave a gap that matches a standard width, so ready-made furniture often ends up in the wrong place. Fitted furniture is designed around them.
Every piece is quoted for your room after the design visit. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Why choose Bespoke Carpentry in Malden Rushett
- Saturday work by arrangement
- Moisture-resistant MDF and birch plywood
- Built around your room
- A spray or hand-painted finish
See how bespoke compares with ready-made and how to compare quotes.
Flat-pack or bespoke?
The real difference is in the fit: scribed edges, a level base on an uneven floor and furniture that meets the ceiling, skirting and picture rail. Off-the-shelf furniture can’t typically do that in an older room.
It’s worth being honest about cost: off-the-shelf furniture normally costs less up front. Bespoke makes more sense where the room is awkward, the space is valuable or you want the furniture to look built in.
Questions from Malden Rushett
Do you make bespoke kitchens for homes in Malden Rushett?
Yes, we work across Kingston upon Thames, Malden Rushett included, and across the rest of London. To get started, you can message us from the contact page with a few details.
Will parking be an issue for fitting furniture in Malden Rushett?
It can be, depending on whether your street is in a controlled parking zone. A van may need a visitor’s permit, a paid parking bay or a bay suspension, which the council arranges, often with notice. It helps to tell us about parking during the design visit, and we’ll plan around it.
Do I need the building owner’s consent?
Possibly. Leases vary, and some require the building owner’s consent for alterations. Your lease is something we cannot advise on, so check it or ask your managing agent.
Can you fit cabinets to walls that aren’t straight?
Yes. Each cabinet is trimmed to the wall and levelled, to give a level line for the worktop. It is one of the main reasons people choose bespoke in an older house.
What are the kitchen cabinets made of?
We use moisture-resistant MDF and birch plywood, finished by spray painting or hand painting. The materials and finish are agreed in your quote.
What finishes do you offer?
There are two ways to finish it: by spray or by hand. A spray finish is smooth and even, while a hand-painted one is easy to touch up later.