Example photo by Aleksandra Dementeva on Unsplash, not our project
Kingston upon Thames · London
Malden Rushett Fitted Wardrobes
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. We make fitted wardrobes for homes in Malden Rushett, each designed at a visit to your home.
- Dusty space on top of the wardrobe
- No space in front for doors to swing
- Damp or musty clothes against an external wall
Fitted wardrobes for your home in Malden Rushett
Fitted bedroom furniture in Malden Rushett
The biggest shares of homes in the area around Malden Rushett were built between 1945 and 1972 (about 45%) and between 1919 and 1939 (about 23%), in the VOA’s 2025 council tax stock figures. It’s a good starting point, though every room is still measured, as two homes of the same age rarely match. Entries on the National Heritage List near the centre of Malden Rushett include Rushett Farmhouse (Grade II), under half a mile south-east. For a listed home, changes inside that alter its character can need listed building consent from the council, for instance removing or fixing into original panelling. The council’s conservation officer is the person to ask before work starts. The ULEZ, run by TfL, takes in all of London, so Kingston upon Thames is inside it. It applies to every van that comes to fit furniture in Malden Rushett. Parking and access are planned during the design visit.
Close to Claygate Common? Morning light matters, so tall pieces go where they will not shade the window. For a flat near Chessington South station, check any building rules on lifts and working hours early, and the sections will be sized for the way in.
Malden Rushett is about 5 miles north of Kingston upon Thames, within the Royal Borough of Kingston upon Thames. Design visits and fitting in Malden Rushett can be on a Saturday, by arrangement. Our Kingston upon Thames coverage includes Malden Rushett.
We work across KT9. We cover homes on streets like Silverglade, Leatherhead Road and West Road, whether you want fitted wardrobes or another piece made for the room. We also cover the places around Malden Rushett: Barwell (1 mile north) and Hook (2 miles north). Across the rest of Kingston upon Thames, our area takes in Kingston upon Thames (5 miles north), Surbiton (4 miles north), New Malden (5 miles north-east), Hampton Wick (5 miles north), Norbiton (5 miles north) and Chessington (2 miles north-east).
Around Malden Rushett
The closest station to Malden Rushett is Chessington South station, roughly 1.3 miles north of the centre. A little further out are Epsom Cottage Hospital (0.8 miles east) and Chessington Castle Hill (1.8 miles north-east). Green spaces nearby include Jubilee Wood.
How we make fitted wardrobes for Malden Rushett
A fitted wardrobe is built into the room itself, running floor to ceiling and wall to wall. That leaves no gap above to gather dust and no wasted space at the sides. If you are planning fitted wardrobes in Malden Rushett, the first step is a design visit to measure up and talk through the design. If you’re living with an awkward slope in a loft bedroom and musty smells in a wardrobe on a cold wall, that is what fitted wardrobes are for, made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
A loft conversion is a common way to add a bedroom to a semi or an interwar house, and the slope can take storage cut to its angle. A big part of the housing around Malden Rushett is interwar, semi-detached or detached. We work in lofts that are already converted, and the furniture is scribed to the slope and the walls.
We write quotes in plain English, without jargon. You will see what will be made, the boards used and the finish, all taken from the design visit.
- Where
- Malden Rushett (KT9)
- Borough
- Kingston upon Thames
- Price
- Quoted for your room
- First step
- Design visit, then a written quote
- Making
- Workshop-made, then fitted
- Made from
- Painted MDF and birch ply
- Working days
- Weekdays, and Saturdays by arrangement
- Contact
- Send us a message
- Last updated
- 27 October 2026
Where other trades come in
Damp treatment and building work are for other specialists, so these points are worth knowing:
- The loft conversion itself, which is building work under Building Regulations
- Electrical work, like moving sockets or switches, which is for your electrician
- Taking out a chimney breast to make space
If you’re not sure what’s possible in your room, you can tell us about the room on our contact form and we’ll give you a straight answer before you arrange a visit. Our process from visit to fitting.
What it’s made from
- Spray-painted finish
- Hinged or sliding doors
- Hanging rails, shelves and drawers
- Birch plywood
- Hand-painted finish
- Moisture-resistant MDF
Also near Malden Rushett
More for homes in Malden Rushett
What it costs
Prices vary from room to room, for these reasons:
- The width and height of the space
- How many doors and drawers there are
- Spray painting or hand painting
- Tricky walls, sloping ceilings and uneven floors
We do not publish set prices, because each job is designed for a single room. Instead, we measure, talk through the design and then quote in writing. To arrange a design visit, drop us a line using the contact form.
Helping us understand the room
When you contact us, these help most:
- A few pictures of the space, taken from the doorway and from each corner
- Your postcode and the borough
- Anything fixed to the wall that the furniture needs to work around
- Examples of the look you are after
Getting a quote starts with a few details: which room it is, rough sizes and a couple of photos if you can take them. When you’re ready, drop us a line using the contact form. We will then arrange a design visit and follow it with a written quote.
Boards, parts and paint
Hanging rails
We place rails at the heights your clothes need: one high rail for long coats and dresses, two rails for shirts and jackets.
Plinths and scribe strips
The plinth lifts the wardrobe and hides an uneven floor. Its height can be set to match the skirting.
Common questions about fitted wardrobes
Can parking be tricky on fitting day in Malden Rushett?
It depends on the street, as many London boroughs run controlled parking zones. A van may need a visitor permit, a pay-and-display bay or a suspended bay, which the council arranges, often with notice. It’s useful to let us know about parking during the design visit.
Do you make fitted wardrobes for homes in Malden Rushett?
Yes, Malden Rushett is within the area we cover, which takes in all of Kingston upon Thames and the rest of London. We start with a design visit to measure the room and talk through what you need, and then we send a quote.
Can fitted wardrobes follow a sloping ceiling?
Yes. The wardrobe is shaped to the ceiling line, with long hanging where there’s height and shelves or drawers where it is lower. It turns tricky space into storage.
How long will the fitting take?
The fitting depends on how many wardrobes there are and how the room is shaped, and the fitting days are set out in your quote. The making happens in our workshop.
Can you add sockets inside the units?
No. Any new wiring, sockets or lights need an electrician, and some electrical work in homes is covered by Part P of the Building Regulations. We will design around them.
Can I send pictures ahead of the visit?
Yes. They give us a feel for the space before we visit. Show anything the furniture has to work around, such as radiators or sockets.
Do you need fitted wardrobes in Malden Rushett?
Sharing a bedroom means sharing the wardrobe. A fitted wardrobe can be planned with separate sections, each with the rails, shelves and drawers its owner needs.
These come up often when people first get in touch:
- Empty alcoves in the bedroom
- No space in front for doors to swing
- Condensation behind a wardrobe on an outside wall
- Too little room for clothes
For a family home near Chessington Community College, fitted wardrobes in a child’s room can be planned so the inside layout changes as they grow.
Before you choose who makes it
- Will the doors close with even gaps?
- Are the boards named, such as MDF or plywood?
- Whether the finish is set out in the quote
- Whether the quote follows a visit to your home
Fitting day, step by step
Before anything is fixed, we set the furniture level. Floors are often out of level, so adjustable feet or a plinth take up the difference, which keeps the lines straight. After that, it is fixed to the wall using fixings that suit the wall, whether that is solid brick, lath and plaster or plasterboard. In a 1930s house with a converted loft, the stairs to the loft room are often steeper than the main flight, so any section going up there is sized for them. Elsewhere in the house, the route is normally more generous. The pieces are joined and fixed once in place.
- You get in touch and let us know about the room.
- At the design visit we measure the room and agree the layout and doors.
- We send a written quote.
- The wardrobes are built in our workshop from moisture-resistant MDF and birch plywood, then sprayed if you chose a spray finish.
- We fit them in your home, scribed to the walls and ceiling; a hand-painted finish is done on site.
- Before we leave, we go through the doors and drawers with you. New paint takes time to cure, so treat it gently at first.
How to prepare
- Empty the space we will be working in
- Tell us about parking near your home
- Tell us about any meters, fuse boards or boilers in the area
Arranging a design visit
Photos help us understand the room before we visit. A few pictures showing the walls, the corners and where the ceiling meets them tell us a lot about the space. To send them over, get in touch through our contact form, and we will arrange a design visit.