Richmond upon Thames · London
Fitted cupboards in Barnes, Richmond upon Thames
Fitted cupboards for your home in Barnes: built-in cupboards for hallways, landings, utility rooms and boot rooms. Each piece is designed at a visit to your home, built in our workshop and fitted by us.
- Built-in storage that matches the woodwork
- Cupboards for a utility or boot room
- A hallway cupboard for coats and shoes
Fitted cupboards in Barnes
Fitted cupboards in Barnes: what you get
A utility or boot room has to work hard, every day. We can build tall cupboards for the vacuum, ironing board and mop, alongside spaces for the washing machine and dryer you choose. Plumbing is for your plumber and new sockets for your electrician, and we leave room for their work in the design. Typical reasons to get in touch are tall cupboards where space is short and landing shelves for bedding and towels, and the answer is made in our workshop from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
Older homes like many around Barnes have floors and ceilings that slope, and a large share of the homes around Barnes date from then. Each piece is scribed and levelled on site so it looks straight in a room that is not. Picture rails, skirting and cornices are worked around rather than removed.
Where other trades are needed, for example an electrician to move a socket, we point that out, so it can be arranged before fitting day. The quote itself covers our work, from the design to the materials and finish.

- Where
- Barnes (SW13, SW15, SW14)
- Borough
- Richmond upon Thames
- Cost
- Quoted for your room
- To begin
- Design visit, then a quote in writing
- Making
- In our workshop, then fitted in your home
- Boards and paint
- MDF and plywood, painted to order
- Working days
- Monday to Friday; Saturdays by arrangement
- Enquiries
- The contact form
- Page updated
- 27 October 2026
Flat-pack or bespoke?
Shop-bought shelves can sag over a long span. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. We design shelves with that in mind.
Standard units come in set widths and heights, so there’s often a strip of wasted space at the side or above. Furniture we make is built to the room’s own sizes, so it can use the full height and width.
Fitted cupboards in Barnes: local notes
The biggest shares of homes in the streets around Barnes were built before 1919 (about 52%) and between 1919 and 1939 (about 17%), in the VOA’s 2025 council tax stock figures. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Part of Barnes is in the Barnes Green Conservation Area, according to Historic England’s records. The controls in a conservation area are mostly about the outside of buildings, so furniture fitted inside a house doesn’t normally need planning permission. If you want to be certain, ask the council’s planning team. Red routes, run by TfL, have strict rules on stopping and loading. If your home in Barnes is on or near a main road, tell us at the measuring visit. Then we can work out where to load and unload.
If your home is as old as some of the listed buildings nearby, such as Church of St Mary, original features like shutters, panelling and fireplaces are worth designing around. If your own home is listed, check with the council before fixing into original features. Close to Barn Elms? Fitted cupboards can be designed to hold outdoor kit, from walking boots to picnic things.
Barnes is within the London Borough of Richmond upon Thames, about 4 miles south-west of Twickenham. Anywhere in Barnes, the process is the same: a design visit, a quote in writing, furniture built in our workshop and fitting in your home. We list Barnes among 19 places we cover in Richmond upon Thames.
Postcode districts we cover here for fitted cupboards: SW13, SW15 and SW14. Our area takes in homes on streets such as Church Road, Station Road and Barnes High Street, for fitted cupboards and any of our other fitted furniture. The A306 and B349 runs close to Barnes; on busy main roads, unloading fitted cupboards takes a little planning. If you are just outside Barnes, we also cover Old Chiswick (1 mile north), Turnham Green (1 mile north-west), Mortlake (1 mile south-west), East Sheen (1 mile south-west) and Putney (1 mile south-east). Across the rest of Richmond upon Thames, our area takes in Twickenham (4 miles south-west), Richmond (3 miles south-west), Richmond upon Thames (2 miles west), Teddington (5 miles south-west), Hampton (7 miles south-west) and Kew (2 miles north-west).
What’s near Barnes
In Barnes, that includes homes near Polish Library POSK in London, The Harrodian School and Chiswick School, among other places. Barnes has its own railway station: Barnes Bridge station. Well-known places in the area include Putney Exchange (1.4 miles south-east) and Antique Breadboard Museum (1.2 miles south-east). Green spaces nearby include Duke's Hollow.
How fitting works for fitted cupboards
Finishing comes last. With a spray finish from the workshop, there is usually only filling and touching up to do in the room; if you chose hand painting, that can be done in the room once the furniture is fitted. The finish is always the one agreed in your quote. Where a period house has been split into flats, the way in often goes through shared parts, so neighbours may appreciate a note before fitting day. The sections are sized for the narrowest point on the route. Saturdays can be arranged.
- You tell us where the cupboards should go.
- We visit to measure up and discuss the design.
- You receive a quote in writing covering the design, materials and finish.
- The cupboards are made in our workshop from moisture-resistant MDF and birch plywood, with a little extra left on edges that meet the walls.
- On fitting day each cupboard is set level on a plinth or adjustable feet and scribed to the wall.
- The spray-painted or hand-painted finish completes the job, and new paintwork should be treated gently while it cures.
Preparing the room
- Keep pets in another room while we work
- Tell us about parking near your home
- Take anything hanging off the wall we are fitting to
Arranging a design visit
Getting a quote starts with a few details: the room, rough measurements and some photos if you have them. When you are ready, get in touch through our contact form. After that, we arrange a visit to measure and talk through the design, then send a quote in writing.
Related advice
Questions we’re often asked
My home in Barnes is a period house with walls that are not straight. Is that a problem?
Yes, that’s normal in older houses: each piece is scribed to the wall and levelled at the base. Skirting, picture rails and cornices are met neatly or cut around. Fixings are chosen for the wall, whether solid brick or lath and plaster.
Do you make fitted cupboards for homes in Barnes?
Yes, Barnes is within the area we cover, which takes in all of Richmond upon Thames and the rest of London. The first step is a design visit, where we measure and talk through the design, and then we send a quote.
How long does fitting take?
The time the fitting takes depends on the number of cupboards and the space they fit into, and we confirm the fitting days in your quote.
How do you get large furniture into a flat?
It is made in sections, sized for the route as well as the room. That’s why we measure the stairs, lift and doorways at the measuring visit.
Do I need permission in a conservation area?
Not normally. Conservation area controls are mainly about the outside of buildings, and fitted furniture inside a house does not normally need planning permission. Listed buildings are different: check with the council’s conservation officer first.
What are your cupboards made from?
MDF for smooth painted parts and birch plywood for shelves and drawer boxes. The finish is spray painted in our workshop or hand painted, in a colour you choose.
Before and after fitting day
Fresh paintwork takes a while to cure fully, so go gently with it for a while. After that, a few simple habits help:
- Check stairs, landings and doorways for access
- Make a note of what needs a home
- Check your lease if you live in a flat
- Deal with any damp walls first
Keep the way to the meters and fuse board clear. Avoid packing things in front of the meters, so they can be reached without a struggle.
If you live in a leasehold flat, check your lease before fixing furniture to the walls. Your lease is something to check with whoever manages the building, and it is best done early.
Pricing fitted cupboards in Barnes
A few things affect what fitted furniture costs:
- The width and height of the space
- Doors and drawers, and how many
- Where a van can park, such as a permit bay or a bay suspension
- Walls and floors that are out of level or out of square
Because every job is different, the cost is set out in a written quote after the visit. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
What to send when you get in touch
Here’s what helps us most when you contact us:
- Where you live, with the postcode
- What you’d like to store or use the space for
- Anything in the way, such as radiators, sockets, switches, a boiler or meters
- Approximate measurements of the space
We quote once we’ve seen the room. At the visit, we measure, look at the walls and floors and discuss the design with you, and the written quote comes after. The price comes in a written quote, worked out from the measurements and the design you choose. To book a design visit, use our contact form.
Is it time for fitted cupboards?
Others want their cupboards to match the rest of the house. We can design doors that suit the style of the house, which keeps the look calm.
If any of these sound familiar, it is worth getting in touch:
- A neat cupboard around the boiler
- Space for laundry, cleaning things and boots
- Storage in a corner nothing else fits
- A linen cupboard on the landing
For an older house near Barnes Methodist Church, hallway recesses and alcoves are where fitted cupboards earn their keep.
Before you choose who makes it
- Are the boards named, like MDF or plywood?
- How they’ll get the furniture into the room
- Whether the quote follows a visit to your home
- How doors and drawers are fitted