Sutton · London
Wall Beds in The Wrythe
We make wall beds for homes in The Wrythe, designed around the room you have. We design your wall bed at a visit to your home, make it in our workshop and fit it.
- A real mattress for visitors
- A bed that fills a little-used room
- Storage built around a fold-down bed
Need wall beds in The Wrythe?
Wall beds in The Wrythe
Many spare rooms are only just big enough for a bed, and a bed that is used a few times a year takes most of the floor. When the bed is folded away, the room is open again, ready for work, exercise or play. Guests still get a proper bed when they stay. We make wall beds from birch ply and moisture-resistant MDF, painted by hand or sprayed, and the usual reasons to get in touch are a proper bed instead of a sofa bed and more floor space in a studio flat.
A good part of the housing around The Wrythe is interwar, semi-detached or detached. If yours is a 1920s or 1930s house, the box room over the stairs is a classic spot for fitted furniture, and the bulkhead is built around rather than ignored. The main bedroom may have a bay at the front and a chimney breast on the side wall.
Our quotes are written in plain words. You’ll see what will be made, the boards used and the finish, all taken from the design visit.
- Where
- The Wrythe (SM5, SM6, SM1)
- Borough
- Sutton
- Prices
- Quoted for your room
- How it starts
- Design visit, then a written quote
- Made
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- Fitting days
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Updated
- 27 October 2026
When you need someone else
We’d rather be clear about where our work stops:
- Electrical work for reading lights
- Choosing a mattress for you
- Strengthening or rebuilding a wall
If you are not sure what’s possible in your room, you can fill in our short enquiry form and we will give you a straight answer before you arrange a visit. How a job runs, step by step.
What it is made from
- Shelves or a desk alongside
- Fold-down bed mechanism
- Birch plywood
- Moisture-resistant MDF
- Hand-painted finish
- Spray-painted finish
Is bespoke worth it?
Ready-made wall bed units are available and normally cost less, and in a straightforward room they may be enough. They’re made in standard sizes, so they may not suit uneven walls, low ceilings or alcoves. A bespoke cabinet is built for the room. Ready-made units come in standard depths that rarely suit every space, which may be too deep for one spot and too shallow for another. With fitted furniture, the depth is chosen for the room.
Parking is part of the price picture in London. Much of London is covered by controlled parking zones, so we may need a visitor permit, a paid bay or a suspended bay near your home. It helps to talk about parking at the measuring visit, so it can be planned.
Why work with us in The Wrythe
- Saturday work by prior arrangement
- Made in our workshop, then fitted in your home
- Fitted tight to walls that are not straight
- Finished by spray or by hand
Take a look at our comparison of bespoke and off-the-shelf and what a quote should include.
Nearby places to The Wrythe
What else we make in The Wrythe
Before and after fitting day
New paint needs time to cure fully, so go gently with it for a while. After that, a few simple habits help:
- Let us know about the wall’s construction
- Follow the mechanism maker’s mattress guidance
- Plan where chairs and desks will sit
- Treat new paintwork gently at first
Whether bedding can stay on the bed when it folds up depends on the mechanism. Bulky duvets and pillows may need storing nearby.
Measure the space in front of the wall, not just the wall. You need clear space for the bed to come down, so think about where a chair or desk will go.
Bedroom storage in The Wrythe
About 40% of the homes in the area around The Wrythe went up between 1919 and 1939, and about 21% between 1973 and 1999, on the Valuation Office Agency’s council tax figures for 2025. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Entries on the National Heritage List near the centre of The Wrythe include Bedford Cottage Woodcote House (Grade II), less than half a mile south-west, and Strawberry Lane Baptist Church (Grade II), less than half a mile south-east. Works inside a listed home that affect its character, for instance removing original joinery or fixing into it, can need listed building consent from the council. The council’s conservation officer is the person to ask before work starts. More than a third of the homes in the area around The Wrythe (about 40%) date from between 1919 and 1939, going by the Valuation Office Agency’s 2025 council tax figures. Many interwar houses have a small room over the stairs, a good spot for fitted furniture built around the bulkhead.
Nonsuch Mansion, about 2.9 miles west, is one of the historic houses in the wider area. If your own home is a period one, tall ceilings give wall beds room to reach the cornice. If you live in a flat close to Carshalton station, the lift, the stair turns and the front door all set the largest piece that can come in. If your children go to Victor Seymour Infants' School or a school nearby, the inside of wall beds can be laid out with adjustable shelves, so the space keeps up as children grow.
The Wrythe is about 1 mile south-west of Sutton, in the London Borough of Sutton. We cover The Wrythe as part of our work across Sutton, and the process is the same everywhere we work. Across Sutton, we cover The Wrythe, along with the rest of the borough.
In SM5, SM6 and SM1, the process is the same as anywhere else in London. Streets in the area include Elm Road, Byne Road and Mill Lane, and homes on each of them are within our area for wall beds. We also cover Carshalton (1 mile south), Wallington (1 mile south-east), Rosehill (1 mile north-west), St Helier (1 mile north-west) and Benhilton (1 mile west). Across the rest of Sutton, our area takes in North Cheam (2 miles west), Sutton Common (2 miles north-west), Bandonhill (2 miles south-east), Shanklin Village (2 miles south-west), Roundshaw (2 miles south-east) and Cheam (3 miles south-west). As one of the bigger places in Sutton, The Wrythe is covered for wall beds and everything else we make.
Landmarks near The Wrythe
In The Wrythe, that includes homes near The Railway Tavern and Carshalton High School for Girls and the streets around them. There is a railway station in The Wrythe itself: Carshalton station. Well-known places in the area include St Helier Hospital (0.9 miles north-west) and Honeywood Museum (0.6 miles south). Open spaces near The Wrythe include The Spinney Local Nature Reserve.
FAQs: wall beds in The Wrythe
Does a conservation area in or near The Wrythe affect fitted furniture?
Usually not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
Do you cover homes near Carshalton station?
Yes, homes across Sutton and the rest of London are within the area we cover. You can send us a few details through our contact form to arrange a design visit, and let us know about parking and access at the same time.
Do you supply the mattress?
The mechanism maker sets which mattresses suit the bed, including its size, depth and weight. We’ll go through those limits at the design visit so you can choose one that works.
Is an outside wall a problem for fitted furniture?
An outside wall can be colder and damper than an inside one, so we allow for ventilation behind and inside the furniture to avoid condensation. If there’s damp, it should be sorted before anything is fitted.
How long does fitting take?
How long fitting takes depends on the design and how much storage goes around the bed, and your quote sets out the fitting days.
How do you get large furniture into a flat?
It is made in sections. That’s why we measure the stairs, lift and doorways at the design visit.
Boards, parts and paint
Hand-painted finish
Hand painting gives a traditional finish in a period room.
Moisture-resistant MDF
A painted MDF front looks crisp, so it suits the doors on the bed cabinet.
How fitting works for wall beds
With the carcasses fixed and level, we hang any doors and fit any drawers or lids. We adjust each one so the gaps line up and it closes cleanly, and then we check it all again. The time the fitting takes depends on the bed, the cabinets and the wall it fixes to, and the fitting days are agreed in your quote. Clearing the room and the way in beforehand helps the day run well. On the day, we cover the floors first, then bring the sections in. Each piece is levelled, scribed where the wall wanders and fixed to suit the wall.
- You get in touch and let us know about the room and the wall where the bed could go.
- At the design visit we check what the wall is made of, as a wall bed has to be fixed securely as its maker specifies.
- You receive a written quote for the wall bed and any storage.
- The bed housing and any shelves or desk are made in our workshop from moisture-resistant MDF and birch plywood.
- On fitting day the cabinet goes in, the mechanism is fixed securely and the bed is tried out.
- We go through the bed with you; the cabinet has the spray-painted or hand-painted finish you chose.
Before we arrive
- Move furniture and belongings away from the wall
- Mention any parking restrictions on your street
- Keep pets out of the room and the hallway
Starting with a design visit
Photos help us understand the room before we visit. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space, along with rough sizes. To share them, fill in our short enquiry form, and we will suggest a time for a design visit.