Example photo by Franco Debartolo on Unsplash, not our project
Enfield · London
Window seats in Crews Hill, Enfield
For homes in Crews Hill, we make window seats from moisture-resistant MDF and birch plywood. The finish is spray painted or hand painted, in a colour agreed with you.
- A period room that needs furniture to suit it
- An empty bay that does not get used
- A nursery or bedroom short of storage
Window seats designed for your room
Crews Hill homes and window seats
Homes built between 1945 and 1972 make up about 36% of the housing in the area around Crews Hill, with about 34% built before 1919, in the VOA’s 2025 council tax stock figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Near the centre of Crews Hill, Historic England’s list includes Glasgow Stud Farmhouse (Grade II), under half a mile north, and Church of St John the Baptist (Grade II), about 0.6 miles south. If you live in a listed building, fixing into or taking out original features such as panelling may need listed building consent. Check with the council’s conservation officer first. Since the zone was extended to the outer boroughs in August 2023, the whole of London has been inside the ULEZ. That includes the vans that bring and fit furniture in Crews Hill. How the van gets to your door is planned during the design visit.
Forty Hall, about 1.5 miles south-east, is one of the historic houses in the wider area. If your own home is a period one, a bay or a sash window is a natural place for a window seat. For a family home near St John's CofE Primary School, deep drawers suit the bulky things families collect, from scooters to swimming kit.
Crews Hill is in the London Borough of Enfield, about 4 miles south-east of Edmonton. Homes in Crews Hill are part of the area we cover for window seats, as part of our work in every London borough. Crews Hill is one of the places in Enfield where we make window seats, and the borough has 26 places on our list.
We make window seats across the EN2 postcode area for window seats. You’ll find streets here like Rosewood Drive, Theobalds Park Road and Whitewebbs Road, and we cover homes on all of them for window seats. We also cover Clay Hill (1 mile south-east), Gordon Hill (1 mile south-east), Forty Hill (2 miles south-east), Enfield Chase (2 miles south) and Enfield (2 miles south). We also make window seats in nearby places like Edmonton (4 miles south-east), Palmers Green (4 miles south), New Southgate (5 miles south), Bush Hill Park (3 miles south), Upper Edmonton (5 miles south) and Oakthorpe Park (5 miles south).
Around Crews Hill
The streets we cover here include those near Chace Community School and The Plough pub, among other places. Crews Hill has its own railway station: Crews Hill station. Nearby you’ll also find Chase Farm Hospital (1 mile south).
Window seats for homes in Crews Hill
Many windows have a radiator beneath them. Over a radiator, the seat needs a grille or open front so warmth can reach the room. The front of the seat includes a grille, with space left around the radiator. We will look at your radiator during the design visit in Crews Hill. We make window seats from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted, and people most often get in touch about a bay with no furniture that fits and no comfortable place to sit in the light.
Many homes around Crews Hill date from the post-war decades. Homes from that era tend to have simpler shapes than older houses, with fewer recesses, which means window seats can add storage that was never built in. Walls may be concrete, block or brick, so fixings are chosen for the wall.
The quote comes in writing, so there is time to read it properly. It covers the design, materials and finish agreed at the visit.
- Location
- Crews Hill (EN2)
- Area
- Enfield
- Prices
- Quoted for your room
- How it starts
- Design visit, then a quote in writing
- Where it is made
- Workshop-made, then fitted
- Boards and paint
- MDF and plywood, painted to order
- Fitting days
- Weekdays (Saturdays if arranged)
- Contact
- Send us a message
- Last updated
- 27 October 2026
Also near Crews Hill
Other services in Crews Hill
How fitting day works
Furniture made in a workshop still has to meet the room it is going into, and that happens on fitting day. Few walls in older London homes are truly flat or square, so each edge that meets a wall is scribed to follow it. How long the fitting itself takes depends on the size of the window and the design, and we confirm the fitting days in your quote. Post-war houses tend to have simple halls and stairs, which helps when the sections come in. The way in is still measured, along with the room. On the day, sections are joined, levelled and fixed.
- You get in touch and let us know about the window, and whether a radiator sits beneath it.
- We visit to measure up and work out how warm air from the radiator will reach the room.
- A written quote follows, covering the seat and the grille.
- In our workshop the seat is built from moisture-resistant MDF and birch plywood, with the grille made to match.
- The seat is fitted with the radiator grille in place, so the heat keeps moving.
How to prepare
- Take down pictures, mirrors and shelves from the wall
- Keep pets in another room while we work
- Tell us about any meters, fuse boards or boilers in the area
Ask for a quote
Because every job is different, the cost is set out in a written quote after the visit. Each room is different, so we quote after seeing it, once the room is measured and the design talked through. To arrange a visit, fill in our short enquiry form.
Related advice
Looking after your furniture
None of this takes much effort. What we’d suggest:
- Think about the cushion you’d like and who will make it
- Bring paint colours you like to the design visit
- Let us know about parking at the design visit
- Think about whether you’d like shelves either side
We open each lid and drawer with you before we go. If there’s a radiator grille, we make sure the radiator is clear and the grille is in place. That way, everything works as planned.
Check now and then that hinges and handles are tight. A loose screw is easy to tighten before it works loose. If a lid or drawer starts to catch, tell us about the room on our contact form and describe what’s happening.
Common questions about window seats
I live near Crews Hill station. Is that in your area?
Yes. We cover all of Enfield and the rest of London. To get started, you can message us from the contact page with some details about the room, and let us know about parking and access at the same time.
Will a conservation area stop me having window seats fitted in Crews Hill?
Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character can require listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
Can you add sockets inside the units?
No. We’re carpenters, so electrical work is for your electrician. We can plan cable routes into the design.
What finishes do you offer?
There are two choices: spray painting, done in the workshop for a smooth, even finish, or hand painting, which can be done on site. The finish is agreed in your quote.
What materials do you use for window seats?
We use moisture-resistant MDF and birch plywood. Birch plywood gives strength to the frame and seat, while the fronts and grilles are MDF, which paints well. Everything is finished by spray painting or hand painting.
Can you come on a Saturday?
Yes, Saturdays are possible by arrangement. Just mention it when you get in touch.
Materials and finishes
Pull-out drawers
A seat can have drawers along its whole length, or drawers with a lid section. Around a radiator, the drawers are placed to leave room for the heat. The design visit settles the mix.
Hand-painted finish
Hand painting gives a slightly softer look than spraying. It can be applied on site, in a colour agreed with you. It can be matched to the window woodwork.
Why people ask for window seats in Crews Hill
In a period home, a window seat can suit the character of the room. Painted to suit the room, it can sit with the original features. It suits anyone who wants new furniture to sit well in a period room.
Some of the things we’re asked to solve are these:
- A sash window with space beneath it going to waste
- A bay with no furniture that fits
- Toys spread across a bedroom floor
- Off-the-shelf pieces that never quite fit the window
If you live in a flat close to Crews Hill station, the lift, the stair turns and the front door all set the largest piece that can come in.
Choosing a carpenter
- Can you see real work of theirs?
- How the furniture will be finished, and where
- A quote in writing that sets out the job
- Will they visit to measure before quoting?
Flats, conversions and leaseholders
A lot of London’s terraced houses are now converted flats, which often brings a shared hall and tight turns on the stairs. We plan the size of each section around it.
Some blocks ask for notice before trades arrive, often through a building manager or concierge. Lifts sometimes need to be booked, and the lift size helps decide how big each section can be. Mention it when you get in touch.