Bespoke fitted furniture across all 32 London boroughs and the City

Example photo by Franco Debartolo on Unsplash, not our project

Enfield · London

Window seats in Gordon Hill, Enfield

Window seats for bays and under sash windows, with storage inside, for homes in Gordon Hill. Every piece is built in our workshop and fitted in your home.

  • A nursery or bedroom short of storage
  • Unused space below a sash window
  • Standard furniture leaving gaps in a bay

Need window seats in Gordon Hill?

Window seats in Gordon Hill: what you get

A seat under a bedroom or nursery window can store toys, bedding or books. With deep drawers or a lift-up lid, it becomes useful storage as well as a place to sit. Drawers can be easier than a lid for children to use. Whatever the room, the process for a home in Gordon Hill is the same. If you are living with a sash window with space beneath it going to waste and toys spread across a bedroom floor, window seats made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted can solve it.

Rooms in post-war homes tend to be simple, with plain skirting and no cornice, which suits fitted storage with clean lines. Many homes around Gordon Hill date from the post-war decades. We still measure everything, as no room is perfectly square.

The written quote is your record of the job. It describes the window seat we have designed for the room, what it is made from and how it’s finished, and the workshop works from it.

Where
Gordon Hill (EN2, EN1)
Area
Enfield
Price
Quoted for your room
How it starts
Design visit, then a written quote
Made
In our workshop, then fitted in your home
Materials and finish
MDF and plywood, painted to order
Fitting days
Monday to Friday; Saturdays by arrangement
Get in touch
Our contact form
Page updated
27 October 2026
Illustration of a window seat under a sash window with shelves either side

Your questions about window seats in Gordon Hill

Can parking be tricky on fitting day in Gordon Hill?

It depends on the street, as many London boroughs run controlled parking zones. A van may need a visitor permit, a paid bay or a parking bay suspension, which the council arranges, often with notice. Let us know what parking is near you during the design visit, and we’ll plan around it.

Do you make window seats for homes in Gordon Hill?

Yes. Gordon Hill is one of the places we work, along with the rest of Enfield and London. To get started, you can get in touch through our contact form with a few details.

Can you build a seat beneath sash windows?

Yes. Seats suit sash windows in many older homes. We measure the cill, the window and any shutters, so the seat sits neatly and the window still works. We do not repair sashes or cills.

Do I choose the paint colour?

You choose it, and it is agreed with you before painting. Whichever finish you pick, it is in the colour you have chosen.

Do I need planning permission for fitted furniture?

Not normally. Conservation areas mostly control changes to the outside, and furniture inside a house doesn’t normally need it. Listed buildings are different: check with the council’s conservation officer first.

Is a lid or drawers better for a window seat?

The answer depends on what goes under the seat. A lift-up lid opens the full depth, which suits bulky things you don’t need every day, while drawers are easier with a cushion on top.

What prompts window seats in Gordon Hill

Storage is another big reason. A seat with a lift-up lid or drawers can hold toys, blankets, books or games. It adds storage without taking up more of the floor.

Here are some of the needs we are asked about most:

  • A child’s room that needs storage and seating
  • A ready-made bench that does not fit the bay
  • Nowhere to keep blankets, toys or books
  • A radiator under the window getting in the way

Forty Hall, about 0.9 miles north-east, is one of the historic houses in the wider area. If your own home is a period one, a radiator under the window just needs a grille in the seat front.

Questions to ask before you hire anyone

  • How doors and drawers are fitted
  • How they handle walls that are not straight
  • Whether they measure the room themselves
  • Can you see real work of theirs?

Our checklist for choosing a carpenter

Looking after your furniture

Fitted furniture is part of the room, so it’s worth looking after. Here are a few tips worth knowing:

  • Choose a colour that suits the room
  • Plan the cushion early so the seat suits it
  • Make room so the whole bay can be measured
  • Let us know about the radiator before we visit

When we’ve finished fitting, the seat and its storage are ready. Paint needs time to cure fully, so treat the new finish gently at first. Keep heavy objects and sharp edges off the fresh paint.

Check now and then that hinges and handles are tight. Tightening early stops a small looseness getting worse. If a lid or drawer starts to catch, message us from the contact page and describe what’s happening.

How fitting day works

Period rooms often have skirting boards, picture rails, cornices or coving for the furniture to meet. On fitting day, we cut and scribe the furniture around these details, so it sits neatly against the room. How long the fitting takes depends on the shape of the bay or recess and what goes under the seat, and we confirm the fitting days in your quote. Walls in post-war homes can be concrete or blockwork, so fixings are chosen for the wall on fitting day. Floors and doorways are protected while the sections come in, and the pieces are assembled in the room.

  1. You contact us with some details about the bay or recess.
  2. At the design visit we measure each side of the bay, because walls in older houses are rarely square.
  3. A quote in writing follows, setting out the design, materials and finish.
  4. In our workshop we make each section of the seat from moisture-resistant MDF and birch plywood.
  5. On fitting day the seat is set level and scribed to follow the walls and floor.

Getting ready for fitting day

  • Take anything hanging off the wall we are fitting to
  • Empty the space we will be working in
  • Tell us about any meters, fuse boards or boilers in the area

Ask for a quote

Pictures help us understand the room before we visit. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space, particularly with rough measurements. To share them, send us a few details through our contact form, and we will suggest a time for a design visit.

Ask for a design visit

Advice

Making use of awkward spaces in Gordon Hill

About 30% of the homes in the streets around Gordon Hill went up between 1945 and 1972, and about 25% before 1919, in the VOA’s 2025 council tax stock figures. That matters for window seats, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. Near the centre of Gordon Hill, Historic England’s list includes St Faith's Cottage (Grade II), less than half a mile south-west, and Brigadier House (Grade II), under half a mile south-east. Works inside a listed home that affect its character, for instance removing original joinery or fixing into it, may need listed building consent from the council. An early word with the council’s conservation officer is the best first step. Controlled parking zones are common across London, and Enfield sets its own rules. Where a street in Gordon Hill is controlled, a van may need a visitor permit, a paid bay or a bay suspension from the council. Let us know about parking at the measuring visit.

If you live in a flat close to Gordon Hill station, it is useful to book the lift and tell the concierge before fitting day. Close to Enfield Town Park? Window seats can be designed to hold outdoor kit, from walking boots to picnic things.

Gordon Hill is about 3 miles south of Edmonton, part of the London Borough of Enfield. Whether your home in Gordon Hill is a terraced house, a flat or a newer build, we measure the room as it is and design around it. Gordon Hill is one of 26 places on our list for Enfield.

Here we cover the EN2 and EN1 postcode area for window seats. Whether you live on a street such as Lea Road, Farr Road and Manor Road or on one nearby, we can visit to measure up for window seats. We also cover the places around Gordon Hill: Clay Hill (1 mile north), Enfield Chase (1 mile south-west), Forty Hill (1 mile east), Enfield (1 mile south) and Crews Hill (1 mile north-west). Other parts of Enfield we cover include Edmonton (3 miles south), Palmers Green (3 miles south), New Southgate (4 miles south-west), Bush Hill Park (2 miles south), Upper Edmonton (4 miles south) and Oakthorpe Park (4 miles south).

Landmarks near Gordon Hill

Around Gordon Hill, we cover homes near The Wonder pub, Russet House School and Chace Community School. Gordon Hill has its own railway station: Gordon Hill station. Nearby you will also find St Michaels Hospital (less than half a mile south-east) and Museum of Enfield (1 mile south).

Map of Gordon Hill © OpenStreetMap contributors

Honest limits

Some parts of a job need another trade, such as an electrician, a plumber or a Gas Safe engineer. Here is what to bear in mind:

  • Plumbing work on the radiator under the window
  • Repairs to sash windows, cills or shutters
  • Any wiring, which needs an electrician

If you are not sure what’s possible in your room, you can use our contact form and we’ll give you a straight answer. Our process from visit to fitting.

What goes into it

  • Birch plywood
  • Moisture-resistant MDF
  • Lift-up lids or drawers
  • Hand-painted finish
  • Radiator grilles
  • Spray-painted finish

Is bespoke worth it?

Standard storage benches come in set sizes. A seat made for your window can use the full width and depth of the bay or recess, with drawers, a lift-up lid or a mix below. In a flat with stairs or a small lift, large flat-pack units can be hard to get in, while fitted furniture arrives in sections made to fit the route. It’s then assembled in the room.

In London, parking can affect the price. The boroughs run controlled parking zones across much of the city, so a van may need a visitor permit, a paid bay or a bay suspension near your home. Let us know about parking at the measuring visit, so we can plan for it.

Why us?

  • A spray or hand-painted finish
  • We visit, measure and discuss the design before we quote
  • Moisture-resistant MDF and birch plywood
  • Work across the whole of London

Take a look at our comparison of bespoke and off-the-shelf or what to look for in a quote.

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City