Kingston upon Thames · London
Fitted cupboards in Coombe, Kingston upon Thames
Thinking about fitted cupboards in Coombe? It starts with a design visit to measure and talk through ideas, then a written quote.
- Space for laundry, cleaning things and boots
- Making use of an awkward alcove or corner
- Built-in storage that matches the woodwork
Fitted cupboards in Coombe
When is bespoke worth it?
The real difference is in the fit: edges scribed to the wall, a level base on a sloping floor and a neat line where the furniture meets the ceiling. In an older room, standard units rarely manage that.
It’s worth being honest about cost: flat-pack is typically cheaper to buy. Bespoke earns its place where the room is tricky, space is tight or you want the furniture to look part of the house.
How we make fitted cupboards for Coombe
Meters and fuse boards often sit in the most awkward places, such as by the front door or in a hallway corner. We can build a cupboard that tidies them away, while keeping them easy to reach. Meter readers and engineers need to get to them, so we design doors or removable panels that make that easy. Most enquiries start with space for laundry, cleaning things and boots and storage for coats and shoes in the hallway; the furniture is made from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
An interwar house tends to have truer walls than a Victorian one, though rarely square corners. Around Coombe, interwar houses, semis and detached homes make up a big part of the housing, and every piece is still scribed where it meets the wall. Lids, doors and drawers are set level on site so they run true.
The furniture is made in our workshop after you’ve had the quote and decided to go ahead. It describes the design, the materials and the finish agreed at the visit, so every detail can be checked first.
- Place
- Coombe (KT2, KT3, SW20)
- Borough
- Kingston upon Thames
- Prices
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Making
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- When we fit
- Weekdays, and Saturdays by arrangement
- Contact
- The contact form
- Page updated
- 27 October 2026
Neighbourhoods near Coombe
More for homes in Coombe
What fitted cupboards can’t fix
Damp treatment and building work are for other specialists, and there are a few other limits too:
- Plumbing for washing machines or sinks (your plumber)
- Moving or servicing a boiler
- Wiring for lights or sockets
If you’re not sure what’s possible in your room, you can drop us a line using the contact form and we’ll give you a straight answer before you arrange a visit. Our process from visit to fitting.
Materials and parts
- Adjustable shelves
- Ventilated doors
- Birch plywood
- Hand-painted finish
- Moisture-resistant MDF
- Spray-painted finish
What affects the price in Coombe
There’s no set price, because there’s no set room. What affects it comes down to:
- Spray painting or hand painting
- Stairs, lifts and the route to the room
- How square the room is
- The width and height of the space
Getting to the room affects the job as well. Several flights of stairs, a small lift or a narrow hall can mean smaller sections and more carrying, which the quote allows for. Every piece is quoted for your room after the design visit.
Before the design visit
Here’s what helps us most when you contact us:
- Anything in the way, like radiators, sockets, switches, a boiler or meters
- What the furniture needs to hold
- Whether it is a house or a flat, and if there are stairs or a lift
- Where you live, with the postcode
Every quote follows a design visit. We measure the space, check the walls and floors and discuss what you’d like, then send a quote in writing. We quote each job for the room it’s going into, after the design visit. To book a design visit, drop us a line using the contact form.
How fitting works for fitted cupboards
If anything comes up on the day, just ask. Most of the decisions were made during the design visit and set out in your quote, so the day itself is about careful fitting. The time the fitting takes depends on the number of cupboards and the space they fit into, and your quote sets out the fitting days. On fitting day, the sections are carried in, assembled, scribed to the wall and levelled. Hand-painted furniture can be finished on site; spray-painted pieces arrive finished from the workshop. Saturday fitting is possible by arrangement.
- We start with a short note from you about the space and what it needs to hold. It might be a hallway, a landing, a utility or a boot room.
- We visit, take careful measurements and go through the design with you. For a boiler cupboard, we plan for the clearances and ventilation in the manufacturer’s instructions.
- You get a written quote for the cupboards we have agreed.
- We make the carcasses, doors and shelves in our workshop.
- The cupboards are fitted in your home and trimmed to follow the walls. We check each door and shelf with you before we leave.
Before we arrive
- Check the building’s rules for trades and lift bookings
- Keep pets in another room while we work
- Let us know if your street is in a controlled parking zone
Starting with a design visit
Rough measurements are fine at the start. Everything is measured properly when we visit. To arrange it, send us a few details through our contact form. You receive a quote in writing after the visit.
Related advice
Is bespoke worth it?
Many off-the-shelf units use chipboard with a printed surface. We use moisture-resistant MDF and birch plywood, painted in a colour you choose, so the finish can match the room. Ready-made furniture rarely suits a bay, a box room or a bulkhead over the stairs, and interwar homes often have all three. Fitted furniture is made around them.
There is no price list, because every piece is designed for one room. We measure up, discuss the design and send a written quote, naming the materials and finish. To arrange a design visit, get in touch through our contact form.
Why us?
- We work across all London boroughs
- Made in moisture-resistant MDF and birch plywood
- Saturday visits and fitting by prior arrangement
- Fitted tight to walls that aren’t straight
Take a look at our comparison of bespoke and off-the-shelf or what a quote should include.
Coombe homes and fitted cupboards
In the neighbourhood around Coombe, the largest groups of homes date from between 1919 and 1939 (about 45%) and between 1945 and 1972 (about 24%), based on the Valuation Office Agency’s 2025 council tax data. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Entries on the National Heritage List near the centre of Coombe include Coombe Conduit House (Grade II*), under half a mile south-west, and Cedar Court (Grade II), under half a mile east. Works inside a listed home that affect its character, for instance removing original joinery or fixing into it, may need listed building consent from the council. The council’s conservation officer is the person to ask before work starts. The ULEZ, run by TfL, takes in all of London, so Kingston upon Thames is inside it. That includes the vans that bring and fit furniture in Coombe. We plan parking and access with you at the measuring visit.
For an older house near Christ Church New Malden, a shallow cupboard in a narrow hall can hold coats without blocking the way. Close to Cottenham Park? Fitted cupboards can be designed to hold outdoor kit, from walking boots to picnic things. The wider area includes historic houses like Southside House, about 1.4 miles east. For a period home anywhere nearby, an old boiler or airing cupboard can be rebuilt with proper shelves.
Coombe is in the Royal Borough of Kingston upon Thames, about 2 miles west of Kingston upon Thames. Wherever you are in Coombe, it works the same way: we visit and measure, send a written quote, make the furniture in our workshop and fit it. Across Kingston upon Thames, we cover Coombe.
We cover every part of the KT2, KT3 and SW20 postcode area for fitted cupboards. We cover homes on streets like West Road, Crown Road and Traps Lane, whether you want fitted cupboards or another piece made for the room. We also cover the places around Coombe: Motspur Park (1 mile south-east), Coombe Hill (1 mile north), Kingston Vale (1 mile north-east), Norbiton (1 mile south-west) and New Malden (1 mile south). Other parts of Kingston upon Thames we cover include Kingston upon Thames (2 miles west), Surbiton (2 miles south-west), Hampton Wick (2 miles west), Chessington (4 miles south), Seething Wells (3 miles south-west) and Hook (4 miles south-west).
What’s near Coombe
Around Coombe, we cover homes near Coombe Girls' School, The Royal Oak Public House and Canbury School and the streets around them. For rail, the closest station is Norbiton station, roughly 1 mile south-west. A little further out are White Lodge Museum (1.8 miles north) and Bentall Centre (1.8 miles west). For a walk, there is Fishpond Wood and Beverley Meads and Kingston Hill Road area.
FAQs: fitted cupboards in Coombe
Is Coombe in the area you cover for fitted cupboards?
Yes, Coombe is within the area we cover, which takes in all of Kingston upon Thames and the rest of London. We start with a design visit to measure the room and talk through what you need, and then we send a quote.
I live near Norbiton station. Is that in your area?
Yes. We cover all of Kingston upon Thames and the rest of London. You can drop us a line using the contact form to arrange a design visit.
What happens at the measuring visit?
We take full measurements, look at the walls and floors and work through the design together. We’ll also ask about access and parking, and afterwards we send a written quote.
Who chooses the colour?
The choice is yours, and it’s agreed with you before painting. Whichever finish you pick, it’s in the colour you’ve chosen.
What are the cupboards made of?
MDF for smooth painted parts and birch plywood for shelves and drawer boxes. We spray paint in the workshop or hand paint, in the colour agreed with you.
Can you build a cupboard around a boiler?
Yes. The cupboard is built around the space and ventilation the boiler’s instructions ask for, with doors that open wide for servicing. Work on the boiler itself is a job for a Gas Safe registered engineer.