Example photo by POOJAN THANEKAR on Unsplash, not our project
Kingston upon Thames · London
Fitted home offices in Coombe, Kingston upon Thames
For homes in Coombe, we make fitted home offices from moisture-resistant MDF and birch plywood. The finish is spray painted or hand painted, in a colour agreed with you.
- Working at the kitchen table
- A corner too odd for a standard desk
- Glare from a window on the screen
Need fitted home offices in Coombe?
Fitted home offices for homes in Coombe
Cables are easy to forget and hard to hide later. We design routes through the desk and units for chargers, screens and printers. Any new sockets are fitted by your electrician, with the furniture designed to suit. We look at the sockets when we visit in Coombe. Typical reasons to get in touch are an awkward space with no furniture that fits and shelves that sag under books and files; the furniture is made from moisture-resistant MDF and strong birch plywood, with a painted finish.
Around Coombe, with interwar houses or semis making up much of the housing, the spare bedroom or dining room often doubles as the office. Cupboards that close over the desk let the room switch back when you’ve finished. Cable routes and the position of sockets are planned into the design.
The furniture is made at our workshop after you’ve had the quote and decided to go ahead. The quote sets out the agreed design, materials and finish, so you can check every detail beforehand.
- Where
- Coombe (KT2, KT3, SW20)
- Borough
- Kingston upon Thames
- Price
- Quoted for your room
- First step
- We visit, measure, then quote
- Where it’s made
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- Fitting days
- Weekdays (Saturdays if arranged)
- Contact
- Send us a message
- Last updated
- 27 October 2026
What affects the price in Coombe
To work out the quote, we look at:
- Awkward walls, sloping ceilings and uneven floors
- Access to the room, such as stairs, lifts and narrow halls
- Where a van can park, like a permit bay or a bay suspension
- The finish: spray painted or hand painted
In London, parking can affect the price. Much of London is covered by controlled parking zones, so we may need a visitor permit, a paid bay or a suspended bay near your home. Tell us about parking at the measuring visit, so we can plan for it.
Getting in touch
A little information at the start saves time later. If you can, send:
- The postcode, so we can plan the visit
- What you’d like to store or use the space for
- Pictures of styles you like, if you have any
- Photos of the whole wall or room, including the floor and ceiling
Every quote follows a design visit. We measure the space, check the walls and floors and discuss what you’d like, then send a quote in writing. The price comes in a written quote, worked out from the measurements and the design you choose. To book a design visit, message us from the contact page.
Looking after your furniture
Getting the most from fitted home offices starts with the planning and carries on after fitting day. Here are some things worth bearing in mind:
- Let us know about parking near your home
- Bring paint colours you like to the design visit
- Note what sits on and around your desk
- Think about what you’d like on show
A soft, damp cloth is the best way to keep the furniture clean. Dry them afterwards, and avoid abrasive pads and strong solvents. The desk edge is touched most, so give it a wipe now and then.
Check now and then that handles and hinges are tight. Tightening early stops a small looseness getting worse. If a door drops or a drawer catches, get in touch through our contact form and tell us.
DIY, flat-pack or bespoke
Bespoke work comes into its own in rooms that are not square. Older London rooms tend to have leaning walls, sloping floors and alcoves of different widths.
Cost matters, and it is fair to say so: flat-pack is usually cheaper to buy. Bespoke makes more sense where the room is tricky, the space is valuable or you want the furniture to look built in.
FAQs: fitted home offices in Coombe
Can parking be tricky on fitting day in Coombe?
It depends on the street, as many London boroughs run controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It helps to let us know about parking during the design visit.
Does a conservation area in or near Coombe affect fitted furniture?
Typically not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, changes inside that alter its character may need listed building consent, so check with the council first. The council’s planning or conservation team can tell you if in doubt.
How do you get large furniture into a flat?
The furniture is built in sections. That’s why we measure the stairs, lift and doorways at the design visit.
What if my walls and floors are out of level?
It is something we deal with all the time. We trim the edges to follow the wall and level the base.
Do you do plastering or decorating?
No. Our work is the furniture, not the walls. We finish the furniture itself, as set out in your quote.
What does a built-in desk cost?
Because every job is different, the cost is set out in a written quote after the visit. It depends on how much furniture you want, the layout and the finish. For a quote, tell us about the room on our contact form to arrange a design visit.
Working from home in Coombe
Homes built between 1919 and 1939 make up about 45% of the housing in the area around Coombe, with about 24% built between 1945 and 1972, on the Valuation Office Agency’s council tax figures for 2025. It’s a good starting point, though every room is still measured, as two homes of the same age rarely match. Within a mile of the centre of Coombe, 6 conservation areas are recorded by Historic England. England has around 10,000 in all, and their controls are mainly about the outside of buildings, so fitted furniture inside a house does not normally need planning permission. About 45% of homes in the area around Coombe date from between 1919 and 1939, going by the Valuation Office Agency’s 2025 council tax figures. The box room over the stairs in an interwar house is a classic home office, built around the bulkhead.
Southside House, about 1.4 miles east, is one of the historic houses in the wider area. If your own home is a period one, an alcove beside the chimney breast is often just right for a built-in desk. For families living near Coombe Hill Junior School, a desk long enough for two can serve a laptop and a homework book side by side. If your home is one of the older houses near Christ Church New Malden, a small back bedroom can become a home office with a desk under the window.
Coombe is about 2 miles west of Kingston upon Thames, in the Royal Borough of Kingston upon Thames. We can visit homes in Coombe on weekdays, or on a Saturday by prior arrangement. Coombe is one of 16 places on our list for Kingston upon Thames.
We cover every part of KT2, KT3 and SW20 for fitted home offices. Whether you live on a street like West Road, Crown Road and Traps Lane or on one nearby, we can arrange a design visit for fitted home offices. If you are just outside Coombe, we also cover Motspur Park (1 mile south-east), Coombe Hill (1 mile north), Kingston Vale (1 mile north-east), Norbiton (1 mile south-west) and New Malden (1 mile south). Elsewhere in Kingston upon Thames, we also cover Kingston upon Thames (2 miles west), Surbiton (2 miles south-west), Hampton Wick (2 miles west), Chessington (4 miles south), Seething Wells (3 miles south-west) and Hook (4 miles south-west).
Around Coombe
Our area takes in the homes around Coombe Girls' School, The Royal Oak Public House and Canbury School. Coombe’s nearest station is Norbiton station, about 1 mile south-west of the centre. A little further out are White Lodge Museum (1.8 miles north) and Bentall Centre (1.8 miles west). For a walk, there is Fishpond Wood and Beverley Meads and Kingston Hill Road area.
Places near Coombe
More for homes in Coombe
Fitting day, step by step
Once the main sections are fixed in place, we hang any doors and fit any drawers or lids. We adjust each one so the gaps line up and it closes cleanly, and then we check it all again. The time the fitting takes depends on the layout and how many pieces make up the office, and the fitting days are agreed in your quote. Clearing the room and the way in beforehand helps the day run well. On the day, we cover the floors first, then bring the sections in. The pieces are levelled, fitted to the walls and fixed back.
- You get in touch with some details about the room.
- At the design visit, we look at the room, the window and your equipment.
- A written quote follows, with the fitting days agreed. You can ask us about any part of it.
- Your office furniture is made in our workshop, sized for the room.
- The office is fitted and set level, ready for your first day at the desk, with the cable routes left open.
Before we arrive
- Move anything in the hall or on the stairs out of the way
- Keep pets out of the room and the hallway
- Let us know about any meters, fuse boards or boilers in the area
How to get a quote
The design visit is where every quote starts. We take full measurements, see how true the walls and floors are and work through the design together. Afterwards, we send a quote in writing for you to look over. To arrange the visit, send us a few details through our contact form.
Related advice
Flats, leases and landlords
In a flat, the route in matters as much as the room. At the design visit, we measure the stairs, the landings, any lift and the doors, so the furniture can be made in sections that fit through.
Many London terraces have been converted into flats, which often brings a shared hall and tight turns on the stairs. We plan the size of each section around it.