Bexley · London
Fitted cupboards in North Cray, Bexley
For homes in North Cray, we make fitted cupboards from moisture-resistant MDF and birch plywood. Each piece is finished by spray or by hand, in the colour you choose.
- Cupboards for a utility or boot room
- Storage in a corner nothing else fits
- Built-in storage that matches the woodwork
Fitted cupboards in North Cray
Bespoke or off-the-shelf?
The real difference is in the fit: edges scribed to the wall, a level base on a sloping floor and a neat line where the furniture meets the ceiling. In an older room, standard units rarely manage that.
Standard units come in set widths and heights, so there’s usually a gap left over at the top or at one end. Fitted furniture is made to the room’s measurements, so it can use the full height and width.
Fitted cupboards for homes in North Cray
A boiler cupboard needs more thought than most. Every boiler comes with instructions on the space and ventilation around it, and we design the cupboard to keep to them. We make sure the doors open fully so the boiler can be serviced, while any work on the boiler is for an engineer on the Gas Safe Register. We make fitted cupboards from moisture-resistant MDF and strong birch plywood, with a painted finish, and people most often get in touch about somewhere for coats, shoes and bags and making use of an awkward alcove or corner.
Coats, shoes, bags and the vacuum cleaner all need somewhere to go in a family house. With interwar houses, semis and detached homes a large part of the housing around North Cray, fitted storage near the front door can take much of it. Meters and fuse boards stay easy to reach.
A quote in writing follows the design visit. It sets out the design we’ve talked through, the materials and the finish, so it is clear what’s included.
- Place
- North Cray (DA14)
- Area
- Bexley
- Cost
- Quoted for your room
- To begin
- Design visit, then a written quote
- Making
- Made in our workshop and fitted on site
- Made from
- MDF and birch plywood, painted
- When we fit
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Last updated
- 27 October 2026
Made for the room, or bought in a box?
Neither choice is right for every home. In a simple space, off-the-shelf can be enough. Where the room is awkward, the walls are uneven or you want the cupboard to look built in, fitted joinery is usually the better answer. Off-the-shelf units come in set widths, so a run along a wall typically ends with a gap, so fitted furniture is made to the wall’s own length. It can use the full height too.
How it is painted is part of the price: spray painting is done in the workshop, while hand painting can be done on site. Your choice, along with the size and the fittings, is reflected in the written quote.
Why choose us
- More than 300 projects completed
- Designed for the room you have
- We visit, measure and go through the design before we quote
- Made in moisture-resistant MDF and birch plywood
Materials and finishes
Hand-painted finish
Hand painting can be done in your home once everything is in place. It is easy to touch up later.
Moisture-resistant MDF
We use moisture-resistant MDF for many doors and carcasses, because it stays flat and paints beautifully. It copes well in utility rooms and on cooler external walls.
Your questions about fitted cupboards in North Cray
Do I need permission for fitted furniture in a conservation area?
Usually not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house does not normally need planning permission. If your home is listed, internal works that affect its character may need listed building consent, so check with the council first. If you are unsure, the council can confirm.
Is North Cray in the area you cover for fitted cupboards?
Yes, we work across Bexley, North Cray included, and across the rest of London. To get started, you can message us from the contact page with some details.
How much does a fitted cupboard cost?
Your quote is written for your room once we’ve visited and measured. A small boiler cupboard and a full run of hallway storage are very different jobs, so we quote once we’ve seen the space. To get started, use our contact form.
What if the wall is cold or damp?
It can be done with some care: ventilation behind and inside the furniture helps avoid condensation and mould. We do not treat damp, so any damp should be sorted before fitting day.
Do you work on Saturdays?
Yes, we can arrange Saturdays. Let us know when you first get in touch, and we will see what we can do.
Do pictures help?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot, especially with rough sizes. To send them, drop us a line using the contact form.
Fitted storage in North Cray
The biggest shares of homes in the neighbourhood around North Cray were built between 1945 and 1972 (about 44%) and between 1919 and 1939 (about 22%), in the VOA’s 2025 council tax stock figures. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. North Cray is partly covered by the North Cray Village Conservation Area, according to Historic England’s records. Conservation area rules mainly cover the outside of buildings, so fitted furniture inside a house does not normally need planning permission. The council can confirm if you are not sure. The ULEZ (Ultra Low Emission Zone) now covers the whole of London, Bexley included. So any van that delivers or fits furniture in North Cray is covered by it. We go through parking and access at the measuring visit.
Near listed buildings like Bath House to Rear of Number 112, about 0.5 miles north-east of the centre of North Cray, older homes may keep original joinery that fitted cupboards can be designed around. For a listed home, fixing into original features can require listed building consent. If you live near Foots Cray Meadows, fitted cupboards can be designed to hold outdoor kit, from walking boots to picnic things. If your children go to Royal Park Primary Academy or a school nearby, deep drawers suit the bulky things families collect, from scooters to swimming kit.
North Cray is about 2 miles west of Sidcup, within the London Borough of Bexley. We work across all London boroughs and the City of London, and North Cray is part of that. We cover places right across Bexley.
Every home in DA14 is within our area for fitted cupboards. Our area takes in homes on streets such as Water Lane, North Cray Road and Leafield Lane, for fitted cupboards and any of our other fitted furniture. Neighbouring places we cover for fitted cupboards include Bexley (1 mile north), Coldblow (1 mile north-east), Ruxley (1 mile south), Blendon (1 mile north-west) and Upper Ruxley (1 mile south). Elsewhere in Bexley, we also cover Sidcup (2 miles west), Welling (2 miles north-west), Erith (4 miles north), Belvedere (4 miles north), Northumberland Heath (3 miles north-east) and Lessness Heath (4 miles north).
Landmarks near North Cray
In North Cray, that includes homes near The White Cross pub and Cleeve Park School and the streets around them. For rail, the closest station is Albany Park station, roughly 0.6 miles north-west. Nearby you’ll also find Bexley Hospital (1.8 miles north) and Bexley Museum (1.5 miles north-east).
Also in North Cray
What affects the price in North Cray
To work out the quote, we look at:
- Where a van can park, like a permit bay or a bay suspension
- Walls and floors that are out of level or out of square
- Whether you choose a spray or hand-painted finish
- The overall size of the piece
Tricky rooms take more time: walls that lean, floors that slope and sloping ceilings all mean more scribing and cutting. That’s reflected in the quote, which we write after seeing the room.
What to send when you contact us
To help us picture the room, please include:
- Anything fixed to the wall that the furniture needs to work around
- Any ideas or images you have saved
- Your postcode and the borough
- What kind of home it is, and which floor the room is on
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and discuss the design with you. A written quote follows the visit. To book one, get in touch through our contact form.
What happens on fitting day
On the morning of the fitting, the first job is covering the floors and protecting the way in from the front door. Next, we carry in the sections made in our workshop, a piece at a time. The time the fitting takes depends on the number of cupboards and the space they fit into, and the fitting days are agreed in your quote. Some interwar and suburban streets have driveways, which can make unloading easier, so let us know during the design visit. Otherwise, details of permits or nearby bays help. Doorways, stairs and floors are covered on the way in.
- You get in touch and let us know whether the cupboard will house a boiler, meters or a fuse board.
- At the design visit we measure up and note the clearances and ventilation the boiler manufacturer asks for. Boiler work itself is for an engineer on the Gas Safe Register.
- A quote in writing follows with the design, materials and finish.
- We make the cupboards in our workshop from moisture-resistant MDF and birch plywood, with vents and access panels where they’re needed.
- We fit them in your home, scribed to the walls, with a spray-painted or hand-painted finish.
Getting ready for fitting day
- Point out meters, boilers and fuse boards near the furniture
- Empty the space we will be working in
- Clear the walls of pictures and shelves
How to get a quote
For a quote for fitted cupboards in North Cray, use our contact form. Let us know the room and the rough idea, plus any rough sizes. We’ll arrange a design visit, then send a written quote.