Hillingdon · London
Under-Stairs Storage in Harlington
Planning under-stairs storage for a home in Harlington? It starts with a design visit to measure and talk through ideas, then a written quote.
- Storage that does not match the hallway
- Coats and shoes piling up in the hall
- Needing a compact spot for a laptop
Need under-stairs storage in Harlington?
Could you do it yourself?
Off-the-shelf cupboards come in fixed sizes, so there is usually a gap left over at the top or at one end. Furniture we make is built to the room’s own sizes, so it can use the full height and width.
Off-the-shelf furniture can be a sensible choice. In a room with square walls and standard sizes, it can work well, and it’s easy to buy.
How we make under-stairs storage for Harlington
Pull-out drawers make the most of the low, deep end of the space. Rather than reaching into the dark, you pull the drawer towards you and see what’s inside. At the tall end, a cupboard works well for coats, an ironing board or the vacuum. A mix of drawers and cupboards is often the best use of the space. We make under-stairs cupboards from moisture-resistant MDF and strong birch plywood, with a painted finish, and people most often get in touch about a fuse board that’s hard to get to and cleaning things with no proper home.
Post-war housing makes up a good share of the homes around Harlington, and in London that can mean houses or flats in blocks. Post-war houses normally have space under the stairs that can do more, while flats tend to have hallways and recesses worth using. Any meters, fuse boards or boilers stay reachable, with the clearances their makers set out.
The quote names the materials: moisture-resistant MDF, birch plywood or both, depending on the design. It also says how the furniture will be finished: spray painted or hand painted.
- Place
- Harlington (UB3, TW6, UB7)
- Area
- Hillingdon
- Prices
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Made
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- Working days
- Monday to Friday; Saturdays by arrangement
- Enquiries
- The contact form
- Updated
- 27 October 2026
Fitted storage in Harlington
About 49% of the homes in the area around Harlington went up between 1945 and 1972, and about 27% between 1919 and 1939, on the Valuation Office Agency’s council tax figures for 2025. It is a good starting point, though every room is still measured, as two homes of the same age rarely match. The National Heritage List records 13 entries within half a mile of the centre of Harlington. Being near listed buildings does not make a home listed, and you can check any address on Historic England’s list. Since the zone was extended to the outer boroughs in August 2023, the whole of London has been inside the ULEZ. Vans bringing furniture to Harlington fall under it, just as they do across the rest of London. We go through parking and access during the design visit.
If you live near Lake Farm Country Park, living near green space often means muddy boots, bikes and outdoor kit, and under-stairs cupboards can give those things a place. If you live in a period home close to Church of St Peter and St Paul, under-stairs cupboards are scribed to walls and stair strings that are rarely straight. Living in a block of flats near Heathrow Terminals 2 & 3 Rail station? Then each piece is planned so it can be carried up and joined together in the room.
Harlington is about 6 miles north of Ruislip, part of the London Borough of Hillingdon. We design and make under-stairs storage for homes in Harlington and across Hillingdon. Harlington is one of 17 places on our list for Hillingdon.
We make under-stairs storage across the UB3, TW6 and UB7 postcode area for under-stairs storage. Our area takes in homes on streets like New Road, Bath Road and Manor Lane, along with the roads around them, whether you want under-stairs storage or another piece made for the room. Nearby, we also make under-stairs storage in Sipson (1 mile north-west), Hatton (1 mile south-east), Cranford (1 mile south-east), Harmondsworth (2 miles west) and Bedfont (2 miles south). Across the rest of Hillingdon, our area takes in Ruislip (6 miles north), Hayes (2 miles north), Hillingdon (4 miles north), Yeading (4 miles north-east), Yiewsley (4 miles north-east) and West Drayton (2 miles north-west).
Around Harlington
We fit furniture in homes around Harlington Community School and The Red Lion pub and the streets around them. The closest station to Harlington is Heathrow Terminals 2 & 3 Rail station, about 1.2 miles south-west of the centre. A little further out are Harlington (0.6 miles north-west). Not far away are Crane Meadows.
How fitting works for under-stairs storage
On the morning of the fitting, the first job is covering the floors and protecting the way in from the front door. The sections made in our workshop come in next, one at a time. The time the fitting takes depends on how much storage you want under the stairs, and we confirm the fitting days in your quote. Post-war houses tend to have simple halls and stairs, so carrying in is rarely difficult. Even so, the route is measured at the design visit. On the day, sections are joined, levelled and fixed.
- You contact us about the space under your stairs.
- At the design visit we measure the underside of the stairs and the floor, then talk through drawers, cupboards and coat storage.
- We send a written quote for the storage.
- The drawers, doors and carcasses are made in our workshop from moisture-resistant MDF and birch plywood, cut to the angle of the stairs.
- On fitting day the units are set level and scribed to follow the stairs and walls.
Preparing the room
- Get any new sockets or wiring done by your electrician before fitting day
- Empty the space we will be working in
- Take down pictures, mirrors and shelves from the wall
Arranging a design visit
We quote once we’ve seen the room. We measure the space, check the walls and floors and discuss what you’d like, then send a quote in writing. The price comes in a written quote, worked out from the measurements and the design you choose. To book a design visit, message us from the contact page.
Related advice
Also in Harlington
Made for the room, or bought in a box?
Standard drawer units are made in fixed sizes that rarely match the depth under the stairs. Bespoke drawers are made to the depth you have, so the back of the space is used too. Each one is sized for what it will hold, from shoes to the vacuum cleaner. Several standalone pieces of different sizes can make a plain room look busy, while one fitted run looks calm and uses the space better. It’s painted in a colour you choose.
The finish affects the cost: spray painting is done in the workshop, while hand painting can be done on site. The written quote reflects your choice, along with the size and fittings.
Why work with us in Harlington
- Saturday visits and fitting by prior arrangement
- Fitted tight to walls that aren’t straight
- Finished by spray or by hand
- Made in moisture-resistant MDF and birch plywood
Take a look at how bespoke compares with ready-made or how to compare quotes.
FAQs: under-stairs storage in Harlington
Is parking a problem for fitting in Harlington?
It depends on the street, as many London boroughs run controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you during the design visit, and we’ll plan around it.
Do I need permission for fitted furniture in a conservation area?
Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, works inside that affect its character may need listed building consent, so check with the council first. If you’re unsure, the council can confirm.
Can you fit furniture to uneven walls?
Uneven walls are normal in older London homes, and the furniture is made to deal with them. We scribe the edges to follow the wall and set the furniture level on adjustable feet or a plinth.
Is an outside wall a problem for fitted furniture?
External walls can be colder and damper than internal ones, so we allow for ventilation behind and inside the furniture to avoid condensation. If there is damp, it should be sorted before anything is fitted.
Do you work in Harlington?
Yes. We work in Harlington and across Hillingdon, and the process is the same everywhere we go.
Is it possible to match the colour of my hallway?
Yes. We paint the storage in the colour you choose, by spray or by hand. It can match the walls, the stairs or the woodwork, so it looks like part of the house.
What affects the cost of under-stairs storage
Prices vary from room to room, for these reasons:
- How many doors and drawers there are
- Walls and floors that are out of level or out of square
- Where a van can park, like a permit bay or a bay suspension
- How easy it is to get the furniture into the room
Access to the room makes a difference too. Narrow halls, tight stairs or a small lift may mean the furniture is made in more sections. Because every job is different, the cost is set out in a written quote after the visit.
Getting in touch
These details help when you get in touch:
- Radiators, sockets, pipes or meters on or near the wall
- The type of home and how the room is reached
- Rough sizes, even if they’re only to the nearest few centimetres
- Examples of the look you are after
Rough measurements are fine at the start. We measure everything properly at the measuring visit, including how level the floor and ceiling are. To get started, message us from the contact page and let us know about the room. The written quote follows the visit.
Caring for painted furniture
Fresh paintwork takes a while to cure fully, so treat it gently at first. After that, a few simple habits help:
- Tell us about anything bulky that needs to fit
- Let us know about parking near your home
- Consider the colour of the hall, the stairs and the skirting
- Let us know if the hall is being decorated
Before we leave, we check every drawer and door with you. Any door to a meter or fuse board is checked so it opens fully and leaves the meter in view. You’ll know everything works as planned.
Check now and then that handles and hinges are tight. Tightening a screw early stops a small looseness becoming a problem. If a drawer stops running smoothly, send us a few details through our contact form and describe it.