Kensington and Chelsea · London
Fitted cupboards in Bayswater, Kensington and Chelsea
Planning fitted cupboards for a home in Bayswater? It starts with a design visit to measure and talk through ideas, then a written quote.
- A hallway cupboard for coats and shoes
- Making use of an awkward alcove or corner
- Tall cupboards where space is short
Need fitted cupboards in Bayswater?
Fitting day, step by step
Every fitting follows the same order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. At the end, we tidy up and go over the work with you. How long the fitting takes depends on the size of the cupboards and the room, and the fitting days are agreed in your quote. Older London houses often have narrow hallways and tight turns on the stairs, so the furniture comes in sections sized for the route in. Floors, stairs and doorways are covered before anything is carried through, and the sections are joined and scribed in the room.
- You get in touch and describe the space.
- At the design visit we plan the cupboards and check how the sections will get in. It helps to let us know about parking then, as a van normally needs a permit or a paid bay in a controlled parking zone.
- Your written quote sets out the design, materials and finish.
- In our workshop we build the cupboards in sections from moisture-resistant MDF and birch plywood.
- We bring the sections in and fit them, scribed to the walls. The finish is sprayed before fitting or painted by hand on site.
Getting ready for fitting day
- Mention any parking restrictions on your street
- Let us know where the boiler and meters are
- Keep pets out of the room and the hallway
Ask for a quote
Getting a quote starts with a few details: which room it is, rough measurements and a couple of pictures if you can take them. When you are ready, get in touch through our contact form. We’ll then arrange a design visit and follow it with a quote in writing.
Read more
About our fitted cupboards in Bayswater
A boiler cupboard needs more thought than most. The boiler maker’s instructions set out the clearances and ventilation it needs, and we design the cupboard to keep to them. Doors open wide enough for servicing, and any work on the boiler itself is for a Gas Safe registered engineer. We make fitted cupboards from birch ply and moisture-resistant MDF, painted by hand or sprayed, and the usual reasons to get in touch are landing shelves for bedding and towels and tidying away the gas and electricity meters.
Older homes like many around Bayswater have floors and ceilings that slope, and a large share of the homes around Bayswater date from then. Fitted cupboards are scribed to the walls and levelled on site so doors, lids and drawers run true. Picture rails, skirting and cornices are worked around rather than removed.
The written quote is your record of the job. It describes the fitted cupboard we’ve designed for the room, what it’s made from and how it’s finished, and it is what the workshop builds to.
- Where
- Bayswater (W2, W8, W11)
- Area
- Kensington and Chelsea
- Cost
- Quoted for your room
- To begin
- Design visit, then a quote in writing
- Making
- In our workshop, then fitted in your home
- Boards and paint
- Painted MDF and birch ply
- Fitting days
- Weekdays, and Saturdays by arrangement
- Contact
- The contact form
- Page updated
- 27 October 2026
Neighbourhoods near Bayswater
What else we make in Bayswater
How we price fitted cupboards
The price reflects the time and materials the job needs. The main factors are:
- Parking and unloading on your street
- Doors and drawers, and how many
- How big the furniture is
- Whether you choose a spray or hand-painted finish
How it is painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. Your choice, along with the size and the fittings, is reflected in the written quote.
What we need to know
When you contact us, these help most:
- The type of home and how the room is reached
- The postcode, so we can plan the visit
- Any ideas or images you have saved
- Pictures showing the full wall, from floor to ceiling
If you know what you want, say so; if you do not, that’s fine, and we can work it out together. The design is talked through at the visit, once we’ve measured, and the written quote that follows sets it out. To arrange a visit, send us a few details through our contact form.
Boards, parts and paint
Shelves
Sagging shelves are avoidable with the right thickness, lip or support.
Hand-painted finish
A hand-painted finish can be done on site, after the cupboards are fitted. Small marks are simple to touch in.
Is bespoke worth it?
You can put together a flat-pack cupboard yourself, which is a fair point in their favour. A fitted cupboard needs a design visit, a quote, workshop time and fitting, and in return the cupboard is built for your home. Tall standalone furniture needs fixing back to the wall so it cannot tip, and older walls of brick or lath and plaster make that harder than it looks. Fitted furniture is designed with the wall in mind.
There is no price list, because each job is designed for a single room. We measure up, discuss the design and send a quote in writing. To start, message us from the contact page.
Why choose Bespoke Carpentry in Bayswater
- Over 300 projects completed
- We work across all London boroughs
- Built around your room
- Spray painted or hand painted, in the colour you choose
See how bespoke compares with ready-made or what a quote should include.
Fitted cupboards for homes in Bayswater
Homes built before 1919 make up about 71% of the housing in the area around Bayswater, with about 10% built between 1945 and 1972, according to Valuation Office Agency council tax figures (2025). We take that into account during the design visit, since older and newer walls take different fixings. 21 conservation areas have at least part of their area within a mile of central Bayswater. England has around 10,000 in all, and their controls are mostly concerned with the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. In inner London, a large part of the street parking sits inside borough-run controlled parking zones. That typically means a van in Bayswater needs a visitor permit, a paid bay or a bay suspension through the council. We ask about parking during the design visit, so the van can be planned for.
If you live near Kensington Palace Green, living near green space often means muddy boots, bikes and outdoor kit, and fitted cupboards can give those things a place. Kensington Palace, about 0.4 miles south-east, is one of the historic houses in the wider area. If your own home is a period one, hallway recesses and alcoves are where fitted cupboards earn their keep. For a family home near Fox Primary School, fitted cupboards can be planned around what a family needs to keep, from coats and bags to sports kit.
Bayswater is about 1 mile south-west of Kensington, in the Royal Borough of Kensington and Chelsea. Bayswater is part of the area we cover, and the process is the same everywhere we work. Our Kensington and Chelsea coverage includes Bayswater.
We cover every part of W2, W8 and W11. We cover homes on streets like Dukes Lane, Salem Road and Aubrey Road, along with the roads around them, for fitted cupboards and any of our other fitted furniture. Main roads around Bayswater include the A4204 and A4206, and we plan where the van can stop before fitting day. If you’re just outside Bayswater, we also cover Westbourne (1 mile north), Westbourne Green (1 mile north), Little Venice (1 mile north-east), Paddington (1 mile north-east) and Paddington Green (1 mile north-east). Across the rest of Kensington and Chelsea, our area takes in Brompton (2 miles south-east), Chelsea (2 miles south-east), World's End (2 miles south), North Kensington (2 miles north-west) and Little Chelsea (2 miles south).
Near you in Bayswater
In Bayswater, that includes homes near Kensington School, The Churchill Arms and Abdus Salam Library, among other places. For rail, the closest station is London Paddington station, roughly 0.9 miles north-east. A little further out are Greek Orthodox Cathedral Treasury Museum (within half a mile north) and St Mary Abbot's Hospital (0.8 miles south). Open spaces near Bayswater include The Long Water and Campden Hill.
Your questions about fitted cupboards in Bayswater
I live in a flat in Bayswater. How will the furniture get up the stairs?
We measure the route in not just the room: the stairs, landings, lift and doors. Fitted cupboards are built in our workshop in sections sized to fit that route, then assembled in your flat. It helps to check any building rules and your lease before fitting day.
Do you cover homes near London Paddington station?
Yes. We cover all of Kensington and Chelsea and the rest of London. You can message us from the contact page to arrange a design visit.
Do I need to be at home on fitting day?
We need someone to let us in. It’s good to have someone there at the end to look over the work with us.
Should I send pictures?
Yes, they help. Pictures of the whole wall or room, including the floor and ceiling, give us a good idea of the space, especially with rough measurements. To send them, get in touch through our contact form.
How is the furniture painted?
There are two ways to finish it: spray painted or hand painted. Spray painting gives a smooth, even finish, and hand painting is easy to touch up.
Can you box in my boiler with a fitted cupboard?
Yes, provided the cupboard keeps to the boiler maker’s instructions. We plan the space and ventilation around it and make sure an engineer can reach it.
Flats, conversions and lettings
If your building is on a red route or a busy main road, getting the furniture from the van to the door needs planning. Red routes are run by TfL and have strict stopping rules, so it’s worth raising at the design visit.
Landlords furnishing a let use fitted furniture too. The materials are the same as for any home: moisture-resistant MDF and birch plywood, with a spray or hand-painted finish.