Merton · London
Fitted Cupboards in Lower Morden
Fitted cupboards in Lower Morden: built-in cupboards for hallways, landings, utility rooms and boot rooms. We make each piece in our workshop and fit it in your home.
- Storage for coats and shoes in the hallway
- Cupboards that sit well with skirting and coving
- Tall cupboards where space is short
Fitted cupboards for your home in Lower Morden
Why bespoke in Lower Morden?
Many off-the-shelf units use chipboard with a printed surface. Our cupboards are made from moisture-resistant MDF and birch plywood, then spray or hand painted, so the finish can match the room. Standard widths rarely add up to the length of a real wall, which fitted furniture avoids. It can also go up to the ceiling rather than stopping short.
We don’t publish set prices, because every piece is designed for one room. Instead, we measure, go through the design and then quote in writing. To arrange a design visit, fill in our short enquiry form.
Why choose Bespoke Carpentry in Lower Morden
- Spray painted or hand painted, in the colour you choose
- Saturday visits and fitting by arrangement
- Built around your room
- Made in our workshop, then fitted in your home
Read our comparison of bespoke and off-the-shelf or what to look for in a quote.
How we make fitted cupboards for Lower Morden
Few walls in an older house are truly straight, and floors and ceilings can be out of level too. Every cupboard is scribed, trimmed by hand to meet the wall, then set level on adjustable feet or a plinth. Skirting boards, picture rails and coving are cut around or met neatly, so the cupboard sits comfortably in the room. Typical reasons to get in touch are a linen cupboard on the landing and making use of an awkward alcove or corner; the furniture is made from birch ply and moisture-resistant MDF, painted by hand or sprayed.
With interwar houses or semis a big part of the picture around Lower Morden, many have had the loft converted, leaving low eaves and sloping ceilings. Those spaces, along with bays and hallways, are where fitted storage can add the most. We build storage in lofts that are already converted or boarded.
We write quotes in plain English, without jargon. You will see what will be made, the boards used and the finish.
- Where
- Lower Morden (SM4, SM3, KT4)
- Borough
- Merton
- Cost
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Where it is made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and birch plywood, painted
- When we fit
- Weekdays (Saturdays if arranged)
- Get in touch
- Send us a message
- Last updated
- 27 October 2026
When you need someone else
It helps to know what’s outside our work before you plan:
- Wiring for lights or sockets
- Changes to meters, which are for your supplier or an electrician
- Any plumbing in a utility room
Not sure whether your space suits fitted cupboards? You can use our contact form and we will tell you before you arrange a visit. How it works.
Materials and parts
- Adjustable shelves
- Hand-painted finish
- Spray-painted finish
- Moisture-resistant MDF
- Birch plywood
- Ventilated doors
Questions from Lower Morden
I live near St Helier station. Is that in your area?
Yes. We cover all of Merton and the rest of London. You can get in touch through our contact form to arrange a design visit.
Is Lower Morden in the area you cover for fitted cupboards?
Yes, we work across Merton, Lower Morden included, and across the rest of London. You can send us a few details through our contact form to arrange a design visit.
Do I get to choose the colour?
You choose it. The paint colour is agreed with you before anything is painted.
Can a fitted cupboard cover the meters and fuse board?
Yes. We can build a cupboard that hides them neatly without getting in the way of access. We don’t move meters or fuse boards, as that is a job for your supplier or electrician.
What happens when you come to measure?
It’s a chance to measure properly and talk through what you’d like. We look at the walls, floors and anything the furniture has to work around, and the written quote comes afterwards.
How much time does fitting need?
It depends on the job. The time the fitting takes depends on the size of the cupboards and the room, and the fitting days are agreed in your quote.
What it costs
We quote each job after the design visit, because no two rooms are the same. This is what makes the difference:
- Awkward walls, sloping ceilings and uneven floors
- Doors and drawers, and how many
- The internal fittings
- Stairs, lifts and the route to the room
Your quote is written for your room once we’ve visited and measured. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Helping us understand the room
A few details help us understand the job before we visit. It is useful to include:
- What kind of home it is, and which floor the room is on
- Approximate measurements of the space
- A few photos of the space, taken from the doorway and from each corner
- Pictures of styles you like, if you have any
If you already have something in mind, tell us; if you don’t, that’s fine, and we can work it out together. At the design visit, we measure up and talk the design through with you, and the written quote that follows sets it out. To arrange a visit, message us from the contact page.
Fitted cupboards for homes in Lower Morden
The biggest shares of homes in the area around Lower Morden were built between 1919 and 1939 (about 85%) and between 1945 and 1972 (about 6%), in the VOA’s 2025 council tax stock figures. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. The Upper Morden Conservation Area is close by, within about a quarter of a mile of the centre of Lower Morden. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house doesn’t normally need permission. Your council can advise if you are unsure. TfL’s red routes have strict stopping rules. If your street in Lower Morden joins a main road, it is worth telling us at the measuring visit. Then we can work out where to load and unload.
If you live near Cannon Hill Common, living near green space often means muddy boots, bikes and outdoor kit, and fitted cupboards can give those things a place. For an older house near St Martin's, a landing recess can take a linen cupboard built to its exact size. If you live in a flat close to St Helier station, each piece is planned so it can be carried up and joined together in the room.
Lower Morden is part of the London Borough of Merton, about 2 miles north of Wimbledon. We work across all London boroughs and the City of London, and Lower Morden is part of that. Our Merton coverage includes Lower Morden.
Every home in SM4, SM3 and KT4 is within our area for fitted cupboards. If your home is on a street such as Ash Road, Bow Lane and Garth Road, or close by, we can visit to measure up for fitted cupboards. If you are just outside Lower Morden, we also cover Morden (1 mile north-east), Sutton Common (1 mile east) and North Cheam (1 mile south). Elsewhere in Merton, we also cover Wimbledon (2 miles north), Colliers Wood (3 miles north-east), Eastfields (3 miles north-east), South Wimbledon (2 miles north-east), Merton Abbey (2 miles north-east) and Wimbledon Chase (2 miles north).
What’s near Lower Morden
The streets we cover here include those near Merton College, Lord Nelson pub and Glenthorne High School and the streets around them. The nearest railway station is St Helier station, roughly 0.9 miles east of the centre. Well-known places in the area include St. Anthony's Hospital (0.6 miles south). For a walk, there is Derwent Floodwash.
Looking after your furniture
People planning fitted cupboards often ask about these. They’re worth knowing before and after fitting:
- Keep boiler vents and meter access clear
- Make a note of what needs a home
- Let us know how parking works on your street
- Look at your lease before fixing to the walls
Doors are hung and adjusted when we fit them. Timber and walls shift slightly through the year, so the hinges allow small adjustments later. A door that starts to rub can usually be set right at the hinge.
Before the design visit, think about what will go in each cupboard. A coat cupboard and a linen cupboard need quite different insides, and knowing this early saves changes later.
How fitting works for fitted cupboards
In older rooms, the furniture normally has to meet skirting, picture rails, cornice or coving. We cut and scribe the furniture around them on site, so it sits neatly against the room. How long the fitting takes depends on the number of cupboards and the space they fit into, and we confirm the fitting days in your quote. Interwar houses typically have a straight run of stairs and a reasonable hallway, though we still measure the route in as well as the room. Fitted cupboards arrive in sections and are assembled in place.
- To begin, message us from the contact page; a brief note on the space and anything in it that needs access is plenty.
- At the design visit we measure up and note the clearances and ventilation the boiler manufacturer asks for.
- A quote in writing follows with the design, materials and finish.
- The cupboards are built in our workshop from moisture-resistant MDF and birch plywood, with the access planned in.
- The cupboards are fitted and set level, and we check the access with you.
Getting ready for fitting day
- Arrange any electrical changes with your electrician in advance
- Move furniture and belongings away from the wall
- Keep pets in another room while we work
Starting with a design visit
To get a quote for fitted cupboards in Lower Morden, get in touch through our contact form. Let us know the room and the rough idea, plus any rough measurements. We will arrange a design visit, then send a written quote.