Croydon · London
Selhurst Fitted Cupboards
Fitted cupboards for your home in Selhurst: built-in cupboards for hallways, landings, utility rooms and boot rooms. Each piece is designed at a visit to your home, made in our workshop and fitted by us.
- A utility room with proper storage
- A linen cupboard on the landing
- Tall cupboards where space is short
Need fitted cupboards in Selhurst?
About our fitted cupboards in Selhurst
A utility or boot room has to work hard, every day. We can build tall cupboards for the vacuum, ironing board and mop, alongside spaces for the washing machine and dryer you choose. Plumbing is for your plumber and new sockets for your electrician, so we plan the cupboards around their work. Most enquiries start with floor-to-ceiling storage in a flat and a neat cupboard around the boiler, and the answer is made at our workshop from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
Not every home has a loft conversion, a bay or a cupboard under the stairs, but almost every home has somewhere storage could go. For a home in Selhurst, the design visit is where the options are worked out. The storage is built in our workshop and fitted in your home.
We write quotes in plain English, without jargon. They say what will be made, what it is made from and how it will be finished, taken from what we agreed at the visit.
- Location
- Selhurst (SE25, SE20, CR0)
- Area
- Croydon
- Prices
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Making
- In our workshop, then fitted in your home
- Materials and finish
- MDF and plywood, painted to order
- When we fit
- Weekdays, and Saturdays by arrangement
- Enquiries
- The contact form
- Page updated
- 27 October 2026
Selhurst homes and fitted cupboards
About 41% of the homes in the area around Selhurst went up before 1919, and about 17% between 1945 and 1972, on the Valuation Office Agency’s council tax figures for 2025. The age of a home tells us a lot about its walls, floors and ceilings, and so about how fitted cupboards are fixed and fitted. 3 conservation areas have at least part of their area within a mile of the centre of Selhurst. Historic England says England has around 10,000, and the controls mainly cover the outside of buildings. Controlled parking zones are run by the boroughs, so the rules in Croydon are set locally. Depending on your street in Selhurst, a visitor permit, a paid bay or a council bay suspension may be needed. Parking near your home is worth mentioning during the design visit.
Kingswood House, about 2.2 miles north, is one of the historic houses in the wider area. For a period home anywhere nearby, an old boiler or airing cupboard can be rebuilt with proper shelves. If you live near South Norwood Recreation Ground, living near green space often means muddy boots, bikes and outdoor kit, and fitted cupboards can give those things a place.
Selhurst is within the London Borough of Croydon, about 1 mile west of Thornton Heath. Wherever you are in Selhurst, it works the same way: we visit and measure, send a written quote, make the furniture in our workshop and fit it. Selhurst is one of the places in Croydon where we make fitted cupboards.
Every address in SE25, SE20 and CR0 is within our area for fitted cupboards. Streets in the area include Park Road, Court Road and Dixon Road, and homes on each of them are within our area for fitted cupboards. Main roads around Selhurst include the A213. If your home is on one of them, tell us at the design visit, as some main roads have strict stopping rules. Close by, we also work in South Norwood (1 mile north), Woodside (1 mile south), Ashburton (1 mile south), Elmers End (1 mile east) and Addiscombe (1 mile south). Other parts of Croydon we cover include Croydon (2 miles south), Coulsdon (6 miles south-west), Purley (5 miles south-west), Broad Green (2 miles south-west), Norwood New Town (2 miles north-west) and Old Town (2 miles south-west).
Landmarks near Selhurst
We fit furniture in homes around The Albion pub and Harris Academy South Norwood and the streets around them. Selhurst has its own railway station: Norwood Junction station. A little further out are Croydon University Hospital (1.7 miles south-west) and Whitgift Centre (2 miles south-west).
Common questions about fitted cupboards
Can parking be tricky on fitting day in Selhurst?
It depends on the street, as many London boroughs run controlled parking zones. A van may need a visitor permit, a paid bay or a parking bay suspension, which the council arranges, often with notice. It is useful to let us know about parking at the design visit.
Does a conservation area in or near Selhurst affect fitted furniture?
Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character can need listed building consent from the council. If you are unsure, the council can confirm.
Will a fitted cupboard work on a sloping floor?
Yes, it is something we deal with all the time. Walls in older homes are rarely flat and floors often slope, so every cupboard is scribed and levelled.
Do I choose the paint colour?
You choose it, and it is agreed with you before painting. Whichever finish you pick, it is in the colour you have chosen.
Do I need to be in when you fit?
We need someone to let us in at the start of the day. It also helps to have someone around at the end, so we can go over the finished furniture together.
Is it possible to build a cupboard around a boiler?
Yes, provided the cupboard keeps to the boiler maker’s instructions. We allow for the clearances and ventilation it needs and make sure an engineer can reach it.
What happens on fitting day
Every fitting follows the same order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. At the end, we tidy up and go over the work with you. How long the fitting takes depends on the number of cupboards and the space they fit into, and the fitting days are agreed in your quote. Parking varies a lot across London, from permit zones to private bays, so let us know what applies at the design visit. For a flat, building rules on lifts and working hours are worth checking.
- We start with the space and what you want to store, including anything tricky like a boiler or meter.
- We visit to measure and check how level the floor and walls are. Doors, shelves and rails are agreed then too.
- We send a written quote with the design, materials and finish.
- The cupboards are made and finished in our workshop.
- We fit them in your home, scribed to the walls and set level. A hand-painted finish is applied on site, if you chose one.
How to prepare
- Clear the area where the furniture is going
- Arrange any electrical changes with your electrician in advance
- Clear the hallway and stairs so the sections can come through
Getting a quote
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and discuss the design with you. Afterwards, we send a written quote. To book one, drop us a line using the contact form.
Related advice
Boards, parts and paint
Shelves
Some shelves can be set to move as your storage changes.
Doors and drawer fronts
Doors can be flat, framed or panelled, painted to match the cupboard. Drawers below the doors suit shoes and small items.
Is it time for fitted cupboards?
Many flats come with little or no built-in storage. A tall cupboard in a hallway or a recess can make a real difference, particularly when it uses the full height of the room.
If you recognise any of these, it’s worth talking to us:
- Cupboards that suit a period house
- Using the full height of a room
- Cupboards for a utility or boot room
- A neat cupboard around the boiler
Near listed buildings like Stanley Technical High School and Stanley Halls, less than half a mile north-west of the centre of Selhurst, older homes may keep original joinery that fitted cupboards can be designed around. For a listed home, fixing into original features can need listed building consent.
Choosing a carpenter
- Is it spray painted or hand painted?
- How they deal with uneven walls and floors
- Whether the quote says what the furniture is made from
- Which parts of the job need an electrician or a plumber
What it costs
The price reflects the time and materials the job needs. That depends on:
- The internal fittings
- The number of doors and drawers
- How big the furniture is
- Parking and unloading on your street
No two rooms cost the same to furnish, because size, layout and finish change from job to job. A spray finish and a hand-painted finish involve different work, and that shows in the price. The figure comes in your written quote after the design visit.
Getting in touch
When you contact us, these help most:
- The type of home and how the room is reached
- Pictures of styles you like, if you have any
- Where you live, with the postcode
- Pictures showing the full wall, from floor to ceiling
A quote begins with a few details from you: the room, rough measurements and some photos if you have them. To send them, get in touch through our contact form. We’ll then arrange a design visit and follow it with a quote in writing.
Places near Selhurst
What else we make in Selhurst
Bespoke or off-the-shelf?
Flat-pack and off-the-shelf furniture has its place. If the walls are straight and the space suits standard sizes, it often does the job, and it is quick to buy.
Shop-bought shelves can sag over a long span. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. That is something we plan for in the design.