Richmond upon Thames · London
Under-stairs storage in Fulwell, Richmond upon Thames
Planning under-stairs storage for a home in Fulwell? We start with a design visit and a written quote, before anything is made.
- No room for a small desk or a place to work
- Coats and shoes piling up in the hall
- Stairs open to a room, with clutter on show
Under-stairs storage in Fulwell
Under-stairs storage for homes in Fulwell
In the neighbourhood around Fulwell, the largest groups of homes date from before 1919 (about 34%) and between 1919 and 1939 (about 30%), according to Valuation Office Agency council tax figures (2025). That matters for under-stairs cupboards, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. Within a mile of the centre of Fulwell, 19 conservation areas are recorded by Historic England. England has around 10,000 in all, and their controls are mostly concerned with the outside of buildings. About 30% of homes in the area around Fulwell date from between 1919 and 1939, on the Valuation Office Agency’s council tax figures for 2025. In many interwar houses the space under the stairs holds the meters or the fuse board, which must stay accessible.
For an older house near St Michael's, the triangle under an old staircase is often deeper than it looks. Living in a block of flats near Fulwell station? Then check any building rules on lifts and working hours early, and the sections will be sized for the way in. If your children go to Stanley Primary School or a school nearby, under-stairs cupboards can give school bags, shoes and sports kit a proper home.
Fulwell is within the London Borough of Richmond upon Thames, about 1 mile north of Twickenham. Homes in Fulwell are part of the area we cover for under-stairs storage. We cover places right across Richmond upon Thames.
We cover every part of the TW11, TW2 and TW12 postcode area for under-stairs storage. Our area takes in homes on streets such as Mays Road, Royal Road and Grove Road, along with the roads around them, whether you want under-stairs storage or another piece made for the room. Fulwell sits close to the A311 and A313. If your home is on one of them, tell us at the design visit, as some main roads have strict stopping rules. Neighbouring places we cover for under-stairs storage include Strawberry Hill (1 mile north-east), Hampton Hill (1 mile south-west), Teddington (1 mile south-east), Twickenham (1 mile north) and Whitton (1 mile north). Across the rest of Richmond upon Thames, our area takes in Richmond (2 miles north-east), Richmond upon Thames (3 miles north-east), Barnes (5 miles north-east), Kew (5 miles north-east), Mortlake (4 miles north-east) and St Margarets (2 miles north-east).
Near you in Fulwell
In Fulwell, that includes homes near Waldegrave School, Pope's Grotto pub and Thames Valley Grammar School, among other places. Fulwell has its own railway station: Fulwell station. Other landmarks nearby include Teddington Memorial Hospital (0.7 miles south-east) and Eel Pie Island Museum (1.3 miles north-east). Not far away are Ham Lands.
Under-stairs storage in Fulwell
No two staircases are quite the same. The soffit slopes, the stringer sets its own line, and floors are often a little out of level. We scribe the storage to the stairs and the walls, so it looks as though it has always been there. That’s something a standard unit can’t do, in Fulwell or anywhere else. We make under-stairs cupboards from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and the usual reasons to get in touch are nowhere to keep the vacuum and ironing board and struggling to reach the gas or electricity meter.
If you live in one of the interwar houses or semis around Fulwell, the hallway may be wider than in a Victorian terrace, with room for a cupboard by the door. Bays at the front suit a seat with storage below, with a grille so any radiator below keeps heating the room. Each space is measured and under-stairs cupboards are made to suit it.
We write quotes in plain English, without jargon. You will see what will be made, the boards used and the finish, all taken from the design visit.
- Where
- Fulwell (TW11, TW2, TW12)
- Area
- Richmond upon Thames
- Prices
- Quoted for your room
- How it starts
- Design visit, then a quote in writing
- Where it is made
- Workshop-made, then fitted
- Made from
- MDF and birch plywood, painted
- Working days
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Updated
- 27 October 2026
Places near Fulwell
What else we make in Fulwell
Before and after fitting day
A little care keeps the finish looking good, whether it was spray painted or hand painted. These practical tips help:
- Empty the cupboard so we can measure every corner
- Let us know about anything bulky that needs to fit
- Consider the colour of the hall, the stairs and the skirting
- Look for meters, a fuse board or pipes before we visit
Decorating around the storage is for your decorator, and it is best to protect the new paintwork while they work. Tape on fresh paint can pull it off, so keep it away from the doors and drawers. If anything is not right, use our contact form and we’ll talk it through.
Keep the way to the meter or fuse board clear. Readers and engineers need to reach them, and you may need to as well. With its own door, the meter stays in reach without much effort.
What affects the cost of under-stairs storage
Each piece is designed for one room, so each price is too. The things that affect it are:
- Awkward walls, sloping ceilings and uneven floors
- How many doors and drawers there are
- Parking near your home
- Stairs, lifts and the route to the room
In London, parking can affect the price. Much of London is covered by controlled parking zones, so a van may need a visitor permit, a paid bay or a bay suspension. It is useful to talk about parking during the design visit, so we can plan for it.
Before the design visit
When you contact us, these help most:
- Where you live, with the postcode
- Radiators, sockets, pipes or meters on or near the wall
- What kind of home it is, and which floor the room is on
- Pictures of styles you like, if you have any
The design visit is where every quote starts. We take full measurements, see how true the walls and floors are and work through the design together. Afterwards, we send a quote in writing, so you can take your time with it. To book one, get in touch through our contact form.
FAQs: under-stairs storage in Fulwell
Will a conservation area stop me having under-stairs storage fitted in Fulwell?
Not normally. Conservation area controls are mainly about the outside of buildings, so fitted furniture inside a house does not normally need planning permission. If your home is listed, works inside that affect its character can need listed building consent, so check with the council first. If you’re unsure, the council can confirm.
Can you fit furniture in a home close to Fulwell station?
Yes. We cover all of Richmond upon Thames and the rest of London. You can tell us about the room on our contact form to arrange a design visit.
Should I choose drawers or cupboards under the stairs?
The answer depends on your stairs and what you will keep there. Drawers make the low end useful, because you pull the back of the space to you. At the tall end, a cupboard is often better for coats and the vacuum.
Is it possible to have a desk built under the stairs?
Often, yes, where the space opens onto a room and there is enough height at one end. A built-in desk with shelves above and drawers below can work well. Any socket or light there is for your electrician, and we plan around it.
Do you move sockets or add lighting?
No. Electrical work isn’t something we do; it’s a job for your electrician. We can plan cable routes into the design, and any new sockets are best done before fitting day.
Can under-stairs storage work around the fuse board?
Yes. Meters and fuse boards often sit under the stairs, and they need to stay accessible. We note them at the design visit and plan the drawers and doors around them. Moving a meter is not our work, so we design for where it is now.
Flats, blocks and rented homes
Blocks of flats often have their own rules on lift bookings, entry systems and times for trades. Let us know about them during the design visit, so fitting day is planned around them.
Conversions and newer flats often have stud walls rather than solid brick. We choose fixings to suit the wall, after checking the walls at the design visit.
How fitting works for under-stairs storage
Once the main sections are fixed in place, we hang any doors and fit any drawers or lids. We adjust each one so the gaps line up and it closes cleanly, and then we check it all again. How long fitting takes depends on how much storage you want under the stairs, and your quote sets out the fitting days. Clearing the room and the way in beforehand helps the day run well. On the day, we cover the floors first, then bring the sections in. The pieces are levelled, fitted to the walls and fixed back.
- First we hear what’s under your stairs now and what you need.
- We measure the space, the slope and the floor, and note any meters or fuse boards.
- The design is agreed and a quote in writing follows.
- The storage is made in our workshop and painted in your colour. We use moisture-resistant MDF and birch plywood.
- The storage is fitted, scribed to the stairs and checked with you.
How to prepare
- Let us know about parking near your home
- Clear the walls of pictures and shelves
- Move anything in the hall or on the stairs out of the way
Starting with a design visit
Prices are quoted for your room, once we’ve measured and talked through the design. Because every room is different, the quote comes after the design visit, once the room is measured and the design talked through. To arrange a visit, send us a few details through our contact form.
Advice
What it’s made from
Birch plywood
Birch plywood is strong and holds screws well. Drawer boxes and carcasses that take a load are often made from it. The layered edge can be left on show or painted.
Spray-painted finish
For a crisp, even look, many people choose a spray-painted finish. We apply it in our workshop, and the paint needs time to cure fully once it is fitted.