Bexley · London
Wall Beds in Bexley Riverside
For homes in Bexley Riverside, we make wall beds from moisture-resistant MDF and birch plywood. The finish is spray painted or hand painted, in a colour agreed with you.
- A bed that fills a little-used room
- Room for a desk and a guest bed
- A bed that looks like cupboards by day
Wall beds in Bexley Riverside
Wall beds in Bexley Riverside: what you get
A wall bed folds up into a fitted cabinet when you don’t need it and comes down when it’s time to sleep. It means a room can work as more than a bedroom, so a guest room can double as a study or playroom. We make the cabinet for your room and paint it in a colour you choose. Most enquiries start with a playroom that can sleep visitors and a storage wall with a bed inside, and the answer is made at our workshop from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
A good part of the housing around Bexley Riverside is interwar, semi-detached or detached. Many 1930s houses have a small box room over the stairs, often with a raised bulkhead in the floor, and the bulkhead is built around rather than ignored. The main bedroom may have a bay at the front and a chimney breast on the side wall.
You get the quote in writing, so you can read it at your own pace and share it with anyone else involved. It covers the design, materials and finish agreed at the visit.
- Location
- Bexley Riverside (DA8, DA7, DA1)
- Borough
- Bexley
- Prices
- Quoted for your room
- How it starts
- Design visit, then a written quote
- Where it is made
- Workshop-made, then fitted
- Made from
- MDF and birch plywood, painted
- When we fit
- Weekdays (Saturdays if arranged)
- Contact
- Our contact form
- Page updated
- 27 October 2026
Where other trades come in
Before you plan the job, it helps to know what we don’t do:
- Electrical work for reading lights
- Advice on your lease
- Building work to make a wall sound
If you are not sure what’s possible in your room, you can get in touch through our contact form and we’ll give you a straight answer before you arrange a visit. Our process from visit to fitting.
What it is made from
- Hand-painted finish
- Birch plywood
- Shelves or a desk alongside
- Moisture-resistant MDF
- Spray-painted finish
- Fold-down bed mechanism
Places near Bexley Riverside
More for homes in Bexley Riverside
Bexley Riverside homes and wall beds
About 40% of the homes in the neighbourhood around Bexley Riverside went up between 1919 and 1939, and about 26% between 1945 and 1972, based on the Valuation Office Agency’s 2025 council tax data. That matters for wall beds, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. About 26% of homes in the neighbourhood around Bexley Riverside were built between 1945 and 1972, going by the Valuation Office Agency’s 2025 council tax figures. Bedrooms from that era tend to be regular, so fitted furniture can run wall to wall, with fixings chosen for concrete, block or brick. Controlled parking zones are common across London, and Bexley sets its own rules. If parking near you is controlled, a visitor permit or a bay suspension may be needed, and the council arranges suspensions, often with notice. Let us know about parking during the design visit.
Close to Braeburn Park? A bedroom facing the green is best kept light, with the furniture on the side walls. Living in a block of flats near Barnehurst station? Then each piece is planned so it can be carried up and joined together in the room.
Bexley Riverside is about 4 miles south-west of Sidcup, in the London Borough of Bexley. We cover Bexley Riverside as part of our work across Bexley, and the process is the same everywhere we work. In Bexley, Bexley Riverside is one of the places we cover, and the borough has 27 places on our list.
In DA8, DA7 and DA1, the process is the same as anywhere else in London. Streets in the area include Mill Road, Hurst Road and Bexley Road, and we cover homes on all of them for wall beds. If you’re just outside Bexley Riverside, we also cover Northumberland Heath (1 mile north-west), Barnehurst (1 mile south), Erith (1 mile north), North End (1 mile east) and Slade Green (1 mile east). Other parts of Bexley we cover include Sidcup (4 miles south-west), Welling (3 miles west), Bexley (2 miles south-west), Bexleyheath (2 miles south-west), Albany Park (4 miles south-west) and Thamesmead (3 miles north-west).
Around Bexley Riverside
In Bexley Riverside, that includes homes near The Royal Oak pub, King Henry School and Trinity School and the streets around them. The closest station to Bexley Riverside is Barnehurst station, about 0.6 miles south-west. Other landmarks nearby include Broadway Shopping Centre (1.4 miles south-west) and Erith Museum (0.9 miles north-east).
The problems wall beds solve
Some people are tired of sofa beds. A wall bed takes a proper mattress, chosen to suit its mechanism, and the bed sits flat on its frame.
These come up often when people first get in touch:
- A hobby room with a bed for guests
- A guest bed that disappears in the day
- A living room with a bed that folds away
- A bed that fills a little-used room
Hall Place and Gardens, about 1.6 miles south, is one of the historic houses in the wider area. If your own home is a period one, tall ceilings give wall beds room to reach the cornice.
Before you hire any carpenter
- Have they measured the stairs, lift and doorways?
- Real projects you can actually look at
- Whether the quote follows a visit to your home
- How they deal with uneven walls and floors
When is bespoke worth it?
If you’re handy, a simple shelf or a standard wardrobe in a square room is a reasonable DIY job. Sloping ceilings, uneven floors and lath-and-plaster walls make it harder.
Standard units come in set widths and heights, so there is usually a gap left over at the top or at one end. Furniture we make is built to the room’s own sizes, so it can use the full height and width.
Made for the room, or bought in a box?
You can buy wall bed units off the shelf, often for less, and they can work in a simple space. They’re made in standard sizes and rarely allow for an uneven wall or an alcove. Ours is made to the room you have. Off-the-shelf units come in set widths, so a run along a wall typically ends with a gap, so fitted furniture is made to the wall’s own length. It can also go up to the ceiling rather than stopping short.
What goes inside matters as much as the outside: drawers take more making than shelves, and each rail, divider or pull-out adds to the work. At the design visit, we work out what you need inside.
Why choose Bespoke Carpentry in Bexley Riverside
- Built from moisture-resistant MDF and birch plywood
- Designed for the room you have
- Workshop-made and fitted by us
- Edges scribed to follow your walls
Take a look at how bespoke compares with ready-made and what to look for in a quote.
How fitting day works
Once the main sections are fixed in place, any doors go on and any drawers or lids are fitted. Each one is adjusted until the gaps are even and it closes cleanly. How long the fitting takes depends on the design and how much storage goes around the bed, and your quote sets out the fitting days. Some interwar and suburban streets have driveways, which can make unloading easier, so it is worth mentioning during the design visit. Otherwise, details of permits or nearby bays help. Floors and doorways are protected while the pieces come in.
- First, you tell us about the space.
- We visit, measure and discuss the bed, shelves and desk. What the wall is made of matters, as the bed has to be fixed securely.
- You receive a written quote, setting out the design, materials and finish.
- Everything is built in our workshop from moisture-resistant MDF and birch plywood.
- The wall bed is fitted in your home.
Preparing the room
- Clear the area where the furniture is going
- Keep pets out of the room and the hallway
- Move anything in the hall or on the stairs out of the way
Ask for a quote
Prices are quoted for your room, once we’ve measured and talked through the design. Each room is different, so we quote after seeing it, when we’ve measured up and talked through the design. To arrange a visit, use our contact form.
Related advice
Questions we are often asked
Can you make wall beds for a home in Bexley Riverside?
Yes. Bexley Riverside is one of the places we work, along with the rest of Bexley and London. To get started, you can send us a few details through our contact form with a few details.
I live near Barnehurst station. Is that in your area?
Yes, homes across Bexley and the rest of London are within the area we cover. You can tell us about the room on our contact form to arrange a design visit.
Will a wall bed work on my wall?
That is something we look at when we measure. Solid brick, stud walls and plasterboard all need different fixings, and the mechanism maker sets out what’s required.
Can I send photos before the visit?
Yes, they help. Photos of the whole wall or room, including the floor and ceiling, give us a good idea of the space. To send them, drop us a line using the contact form.
What finishes do you offer?
There are two choices: spray painting, done in the workshop for a smooth, even finish, or hand painting, which can be done on site. Your quote sets out which you have chosen.
Are fold-down beds safe to use?
A wall bed is designed to be used regularly as long as they’re fixed and used as the maker specifies. We fix the mechanism securely to a sound wall or floor, and the maker’s guidance on use should always be followed.