Bexley · London
Wall beds in North End, Bexley
Wall beds in North End: fold-down wall beds built into fitted cabinets. Each piece is designed at a visit to your home, made at our workshop and fitted by us.
- Storage built around a fold-down bed
- A home office that also sleeps guests
- A hobby room with a bed for guests
Need wall beds in North End?
Wall beds in North End: what you get
Many people now work from home in a room that also has to sleep guests. A wall bed with a desk or shelves beside it lets the room do both, so the bed does not dominate the working day. Cable routes for the desk can be planned in, while new sockets are for your electrician. People normally come to us about storage built around a fold-down bed and a studio that works by day and night; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
If you live in one of the post-war homes around North End, the bedroom may be modest in size but regular in shape. Fitted furniture can make good use of every wall, planned around the space you need in front. Concrete and blockwork walls need fixings chosen for them.
If the job needs another trade, like an electrician or a plumber, we will tell you. The quote itself covers our work, from the design to the materials and finish.
- Where
- North End (DA8, DA1, DA7)
- Borough
- Bexley
- Price
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Made
- In our workshop, then fitted in your home
- Materials and finish
- MDF and plywood, painted to order
- Fitting days
- Weekdays (Saturdays if arranged)
- Get in touch
- Our contact form
- Page updated
- 27 October 2026
Wall beds in North End: local notes
Homes built between 1945 and 1972 make up about 33% of the housing in the streets around North End, with about 29% built between 1973 and 1999, going by the Valuation Office Agency’s 2025 council tax figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. The Oak Road Conservation Area is close by, within about a quarter of a mile of the centre of North End. Conservation area controls are largely about how buildings look from outside, and fitted furniture inside a house does not normally need planning permission. The council can confirm if you’re not sure. TfL’s Ultra Low Emission Zone covers every part of London, Bexley included. So any van that delivers or fits furniture in North End is covered by it. How the van gets to your door is planned at the measuring visit.
If your home is one of the older houses near St. Augustine's Church, a bedroom chimney breast and its alcoves often shape where wall beds go. For a flat near Slade Green station, it is useful to book the lift and tell the concierge before fitting day. For families living near St. Paul's (Slade Green) Church of England Primary School, wall beds in a child’s room can be planned so the inside layout changes as they grow.
North End is in the London Borough of Bexley, about 5 miles south-west of Sidcup. We work across all London boroughs and the City of London, and North End is part of that. Our work takes in places right across Bexley.
Every home in DA8, DA1 and DA7 is within our area for wall beds, from the main roads to the quieter streets. You will find streets here such as Oak Road, Elm Road and Moat Lane, and we cover homes on all of them for wall beds. We also cover the places around North End: Slade Green (1 mile east), Bexley Riverside (1 mile west), Barnehurst (1 mile west) and Northumberland Heath (1 mile west). We also make wall beds in nearby places like Sidcup (5 miles south-west), Welling (4 miles west), Bexley (3 miles south-west), Belvedere (2 miles north-west), Lessness Heath (2 miles north-west) and Bexleyheath (2 miles west).
Near you in North End
Around North End, we cover homes near Railway Tavern and Haberdashers' Aske's Crayford Academy. There is a railway station in North End itself: Slade Green station. A little further out are Erith Museum (1.2 miles north-west) and Erith and District Hospital (1.4 miles north-west).
How fitting day works
Period rooms often have skirting boards, picture rails, cornices or coving for the furniture to meet. On fitting day, we cut and scribe the furniture around these details, so it sits neatly against the room. The time the fitting takes depends on the bed, the cabinets and the wall it fixes to, and the fitting days are agreed in your quote. Communal stairs in older blocks often have tight landings, so sections are sized for both the stairs and any lift. Letting the caretaker or managing agent know beforehand helps. Common parts are protected while we carry in.
- You get in touch with a few details about the room.
- The design visit covers measuring, the wall and the layout. What the wall is made of matters, as the bed has to be fixed securely.
- A written quote is sent to you.
- Everything is made in our workshop from moisture-resistant MDF and birch plywood.
- We fit the bed and storage in your home.
How to prepare
- Tell us about parking near your home
- Keep pets in another room while we work
- Let us know where the boiler and meters are
Starting with a design visit
If you know what you want, say so; if not, we can work it out together at the visit. At the design visit, we measure up and talk the design through with you, and the written quote that follows sets it out. To start, send us a few details through our contact form.
Advice
Why bespoke in North End?
Ready-made wall bed units are available and typically cost less, and in a simple room they may be enough. They’re made in standard sizes and rarely allow for an uneven wall or an alcove. Ours is made to the room you have. Big ready-made pieces can be awkward to carry up communal stairs, while fitted furniture arrives in sections made to fit the route. It’s then assembled in the room.
The inside of the furniture affects the price as well: drawers take more making than shelves, and each rail, divider or pull-out adds to the work. At the design visit, we work out what you need inside, and the quote follows.
Why work with us in North End
- More than 300 projects completed
- A design visit, then a quote in writing
- A spray or hand-painted finish
- Workshop-made and fitted by us
Flats, blocks and rented homes
We also make and fit furniture for landlords furnishing a let. The materials are the same as for any home: moisture-resistant MDF and birch plywood.
In conversions and newer blocks, many internal walls are timber or metal stud with plasterboard. Fixings are chosen to suit whatever the wall is made of, which we check at the measuring visit.
Neighbourhoods near North End
More for homes in North End
What we do not do
As carpenters, we leave some work to other trades. It helps to know these before you plan the job:
- Getting consent under your lease
- New sockets, lighting or wiring (your electrician)
- Choosing a mattress for you
If in doubt, you can tell us about the room on our contact form and describe the room before you arrange a visit. How it works.
What it’s made from
- Moisture-resistant MDF
- Hand-painted finish
- Fold-down bed mechanism
- Spray-painted finish
- Shelves or a desk alongside
- Birch plywood
What affects the price in North End
Several things affect the price:
- The finish: spray painted or hand painted
- How easy it is to get the furniture into the room
- What goes inside: rails, shelves, drawers and dividers
- Parking and unloading on your street
The price comes in a written quote, worked out from the measurements and the design you choose. The price depends mainly on the size of the piece, how many doors and drawers it has and what goes inside.
Before the design visit
Ahead of the design visit, we will usually ask about:
- Photos of the whole wall or room, including the floor and ceiling
- Pictures of styles you like, if you have any
- What you’d like to store or use the space for
- The postcode, so we can plan the visit
It’s useful to see the room before we come. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space. To send them over, drop us a line using the contact form, and we’ll suggest a time for a design visit.
Your questions about wall beds in North End
Will a conservation area stop me having wall beds fitted in North End?
Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. If you are unsure, the council can confirm.
Is North End in the area you cover for wall beds?
Yes. North End is one of the places we work, along with the rest of Bexley and London. You can tell us about the room on our contact form to arrange a design visit.
How much room do I need in front of a wall bed?
The bed needs room in front of it to come down, as well as the depth of the cabinet itself. We measure this at the measuring visit, so the design works.
Will a wall bed work on my wall?
That is something we look at when we measure. Different walls need different fixings, and the mechanism maker sets out what’s required.
Is a wall bed safe?
Wall beds are made for regular use when fixed and used as its maker specifies. We fix the mechanism securely to a sound wall or floor, and the maker’s guidance on use should always be followed.
How long will the wall bed take to fit?
How long the fitting takes depends on the size of the bed and the cabinets around it, and the fitting days are agreed in your quote. We will talk it through during the design visit.