Example photo by Franco Debartolo on Unsplash, not our project
City of London · London
Window Seats in Bishopsgate
We make window seats in moisture-resistant MDF and birch plywood for homes in Bishopsgate. The finish is spray painted or hand painted, in a colour agreed with you.
- A radiator that makes the space hard to use
- Toys spread across a bedroom floor
- A ready-made bench that does not fit the bay
Window seats in Bishopsgate
Window seats in Bishopsgate
We make the seat itself, and you can source a cushion to the size we give you. That leaves the choice of fabric and style to you. We plan the depth and height so the seat is comfortable with a cushion on it. If your home has a nursery or bedroom short of storage and unused space below a sash window, that is what window seats are for, made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
A hall in a home built since 2000 is often compact, with several doors leading off it, which leaves little wall for storage. With many homes around Bishopsgate built since 2000, the hall is often where we look first. Even a shallow run can hold coats and shoes without crowding the doors.
After the design visit, we send you a written quote. It describes the design we discussed, the materials and the finish, so it’s clear what’s included.
- Where
- Bishopsgate (E1, EC2A, EC1Y)
- Area
- City of London
- Prices
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Made
- In our workshop, then fitted in your home
- Materials and finish
- MDF and plywood, painted to order
- Working days
- Weekdays, and Saturdays by prior arrangement
- Contact
- Our contact form
- Page updated
- 27 October 2026
Fitted storage in Bishopsgate
Homes built since 2000 make up about 41% of the housing in the neighbourhood around Bishopsgate, with about 22% built before 1919, in the VOA’s 2025 council tax stock figures. The age of a home tells us a lot about its walls, floors and ceilings, and so about how window seats are fixed and fitted. Entries on the National Heritage List near the centre of Bishopsgate include Guild Church of St Ethelburga the Virgin (Grade I), less than half a mile south, and Church of St Helen (Grade I), less than half a mile south. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, can require listed building consent. An early word with the council’s conservation officer is the best first step. Parking on many inner London streets is controlled, with zones run by each borough. In Bishopsgate, a van will usually need a visitor permit, a paid bay or a suspended bay, and the council arranges suspensions, often with notice. We ask about parking at the design visit, so the van can be planned for.
If your children go to The London School of Barbering or a school nearby, window seats can be planned around what a family needs to keep, from coats and bags to sports kit. Living in a block of flats near London Liverpool Street station? Then window seats are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room.
Bishopsgate is within the City of London, about 1 mile west of City of London. Whether your home in Bishopsgate is a terraced house, a flat or a newer build, the furniture is designed around the room as we find it. Bishopsgate is one of the places in the City of London where we make window seats, and the borough has 8 places on our list.
Design visits and fitting in E1, EC2A and EC1Y work the same way as everywhere else we cover. If your home is on a street like Bush Lane, Swan Lane and Love Lane, or close by, we can arrange a design visit for window seats. Bishopsgate is near the A3 and A10, so if your home is on a main road, mention it when you get in touch. We also cover Aldgate (1 mile south-east), Spitalfields (1 mile east), City of London (1 mile west), Tower Hill (1 mile south) and Whitechapel (1 mile east).
Landmarks near Bishopsgate
In Bishopsgate, that includes homes near The Aldgate School, St Mary-at-Hill and Bishopsgate Institute Special Collections and Archives and the streets around them. There’s a railway station in Bishopsgate itself: London Liverpool Street station. A little further out are Gabriel's Wharf (1.2 miles south-west) and London Bridge Hospital (0.7 miles south). Green spaces nearby include Tower Hill.
Tips worth knowing
Getting the most from window seats starts with the planning and carries on after fitting day. Here are some things worth bearing in mind:
- Think about matching the woodwork or the walls
- Let us know about the radiator before we visit
- Plan the cushion early so the seat suits it
- Mention any parking rules on your street
Before we leave, we check every lid and drawer with you. Any grille is checked so the radiator can still warm the room. That way, everything works as planned.
Open and close lids with care, rather than letting them drop. That protects the hinges and the paint. Avoid overloading drawers so they keep running smoothly.
Fitting day, step by step
The last stage of the day is the finish. If the furniture was spray painted in the workshop, we fill the fixing holes and touch up on site; if you chose hand painting, that can be done in the room once the furniture is fitted. Either way, the finish is the one set out in your quote. Stud walls can carry pipes and cables, so we check before drilling, and heavy pieces are fixed into the studs or stand on the floor. Any new sockets or plumbing are for your electrician or plumber, ideally before fitting day.
- You get in touch and tell us about the window, and whether a radiator sits beneath it.
- We visit to measure up and work out how warm air from the radiator will reach the room.
- A written quote follows, covering the seat and the grille.
- In our workshop the seat is built from moisture-resistant MDF and birch plywood, with the grille made to match.
- We fit it in your home and scribe it to the walls, with the finish sprayed beforehand or painted by hand on site.
Before we arrive
- Leave a clear route from the front door to the room
- Let us know where the boiler and meters are
- Have your electrician move any sockets or switches beforehand
Ask for a quote
A quote begins with some details from you: the room, rough sizes and some photos if you have them. To send them, tell us about the room on our contact form. After that, we arrange a visit to measure and go through the design, then send a written quote.
Related advice
Bespoke or off-the-shelf?
We scribe each seat to follow the walls and floor, so it fits neatly at the walls and floor. A bench simply sits in front of the window. In an older room, the difference shows. Big standalone units can dominate a compact room, whereas fitted pieces painted to suit the walls sit back into the space.
How it’s painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. Your choice, along with the size and the fittings, is reflected in the written quote.
What you get with us
- We visit, measure and discuss the design before we quote
- Built around your room
- Fitted tight to walls that aren’t straight
- We work across all London boroughs
Take a look at our comparison of bespoke and off-the-shelf and what to look for in a quote.
Questions from Bishopsgate
Do I need permission for fitted furniture in a conservation area?
Typically not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, internal works that affect its character may need listed building consent, so check with the council first. If you’re unsure, the council can confirm.
Can you make window seats for a home in Bishopsgate?
Yes, Bishopsgate is within the area we cover, which takes in all of the City of London and the rest of London. The first step is a design visit, where we measure and go through the design, and then we send a quote.
Is a lid or drawers better for a window seat?
The answer depends on what goes under the seat. A lift-up lid opens the full depth, which suits bulky things you do not need every day, while drawers mean you do not have to move the cushion.
Who chooses the colour?
You choose it. The paint colour is agreed with you, and it is set out in the quote.
Is the furniture spray painted or hand painted?
You can choose between two finishes: spray painted or hand painted. Spray painting gives a smooth, even finish, and hand painting is easy to touch up.
Can you come on a Saturday?
Yes, we can arrange Saturdays. Just mention it when you contact us.
Places near Bishopsgate
More for homes in Bishopsgate
Boards, parts and paint
Lift-up lids
With a lift-up lid, the whole space beneath the seat opens up. It is good for bulky things that aren’t needed daily. We make the lid to open and close cleanly.
Hand-painted finish
Some people prefer a hand-painted finish for its softer look. It’s done on site, in the colour you choose. It can match the woodwork around the window.
Do you need window seats in Bishopsgate?
Most people simply want to use the window. Bays are hard to furnish, and a built-in seat makes good use of them. It gives you a place to sit in the light.
Common reasons to get in touch include:
- No space for toys and games
- A bay window that is hard to furnish
- Off-the-shelf pieces that never quite fit the window
- A sash window with space beneath it going to waste
If you live near Finsbury Circus, living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place.
Before you choose who makes it
- Whether you’ll get a written quote, not just a figure
- How the doors are hung and adjusted
- Whether the route into your home has been checked
- Where they’ll park and unload