Example photo by Franco Debartolo on Unsplash, not our project
Greenwich · London
Middle Park Window Seats
For homes in Middle Park, we make window seats from moisture-resistant MDF and birch plywood. Each piece is finished by spray or by hand, in the colour you choose.
- No space for toys and games
- A room with shutters and sashes that deserves a proper seat
- Looking for a reading spot by the window
Window seats in Middle Park
What we do not do
We’re carpenters, so some jobs belong to other trades. These are worth knowing before you plan:
- Making good the walls, which is for a plasterer or decorator
- New sockets or lights near the window, which are for your electrician
- Moving or replacing a radiator, which is for your plumber
If in doubt, you can use our contact form and describe the room. How a job runs, step by step.
Boards, parts and finishes
- Hand-painted finish
- Radiator grilles
- Birch plywood
- Lift-up lids or drawers
- Spray-painted finish
- Moisture-resistant MDF
Window seats for homes in Middle Park
A well-made window seat gives you a place to sit in the best light in the room. Our window seats are made for bays, sash windows and the recesses beside them, usually with storage below, under a lift-up lid or in drawers. In Middle Park, as everywhere we work, it begins with a visit to measure and plan. If your home has unused space below a sash window and a bay window that’s hard to furnish, window seats made from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish can solve it.
Landings in houses from between the wars are often roomier than in a Victorian terrace, and that space can take shallow fitted storage. If yours is one of the interwar houses, semis or detached homes that make up much of the housing around Middle Park, the landing is worth a look as well as the hall. If a boiler or cylinder sits there, it keeps its clearances and access.
If the job needs another trade, such as an electrician or a plumber, we will tell you, so it can be arranged before fitting day. Our quote covers the carpentry: the design, the materials and the finish.
- Place
- Middle Park (SE9, SE12)
- Area
- Greenwich
- Cost
- Quoted for your room
- First step
- A design visit: we measure and talk it through
- Made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and plywood, painted to order
- Working days
- Weekdays; Saturdays on request
- Enquiries
- Send us a message
- Updated
- 27 October 2026
Why bespoke in Middle Park?
Bespoke seats are scribed to the walls and set level, so it fits neatly at the walls and floor. A ready-made piece sits in the space rather than being part of it. The difference is most noticeable in a period room. Ready-made units come in standard depths that rarely suit every space, which may be too deep for one spot and too shallow for another. Fitted furniture is made to the depth the space can take.
We do not publish set prices, because every piece is designed for one room. We measure up, discuss the design and send a quote in writing, with the materials and finish set out. To start, send us a few details through our contact form.
Why us?
- Made in our workshop, then fitted in your home
- Every quote follows a design visit
- Saturday work by arrangement
- Built from moisture-resistant MDF and birch plywood
Take a look at how bespoke compares with ready-made or what to look for in a quote.
What prompts window seats in Middle Park
A quiet place to read is a common wish. A window seat, perhaps with shelves either side, does exactly that. It quickly becomes a favourite place to sit.
Typical reasons people contact us include:
- A child’s room that needs storage and seating
- A radiator that makes the space hard to use
- An empty bay that does not get used
- A ready-made bench that does not fit the bay
Eltham Palace, about 0.4 miles east, is one of the historic houses in the wider area. If your own home is a period one, a bay or a sash window is a natural place for a window seat.
Questions to ask before you hire anyone
- Whether they can show you real projects they’ve done
- Will they visit to measure before quoting?
- Have they measured the stairs, lift and doorways?
- A quote in writing that sets out the job
What happens on fitting day
Every fitting follows the same order: we protect the floors, bring the sections in, set them level, scribe them to the walls, fix them and finish them. Then the room is tidied and we look over the work with you. How long the fitting takes depends on the size of the window and the design, and your quote sets out the fitting days. Semis and detached houses often have a front path or a side gate, which can make carrying in easier. Gates, paths and steps up to the door are part of the route we measure. Floors are covered from the door to the room.
- You contact us with some details about the bay or recess.
- At the design visit we measure each side of the bay, because walls in older houses are rarely square.
- We send a quote in writing.
- The seat is built in our workshop from moisture-resistant MDF and birch plywood, following the angles we measured.
- On fitting day the seat is set level and scribed to follow the walls and floor, with a spray-painted or hand-painted finish.
Before we arrive
- Take anything hanging off the wall we’re fitting to
- Make sure pets are kept safely away
- Let us know about any meters, fuse boards or boilers in the area
Starting with a design visit
Getting a quote starts with some details: which room it is, rough sizes and a couple of photos if you can take them. When you’re ready, use our contact form. We will then arrange a design visit and follow it with a quote in writing.
Related advice
Also near Middle Park
Other services in Middle Park
Middle Park homes and window seats
In the area around Middle Park, the largest groups of homes date from between 1919 and 1939 (about 63%) and between 1945 and 1972 (about 31%), based on the Valuation Office Agency’s 2025 council tax data. The age of a home tells us a lot about its walls, floors and ceilings, and so about how window seats are fixed and fitted. Middle Park is partly covered by a conservation area, according to Historic England’s records. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house doesn’t normally need permission. Your council can advise if you’re unsure. All of London, Greenwich included, is inside the ULEZ. It applies to the vans that deliver and fit furniture in Middle Park, as it does anywhere else in London. We go through parking and access at the measuring visit.
Near listed buildings like Great Hall of Eltham Palace, less than half a mile east of the centre of Middle Park, older homes may keep original joinery that window seats can be designed around. For a listed home, fixing into original features can require listed building consent. Close to Horn Park? Living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place.
Middle Park is about 3 miles north-east of Plumstead, in the Royal Borough of Greenwich. Anywhere in Middle Park, the process is the same: we visit and measure, send a quote in writing, make the furniture in our workshop and fit it. We list Middle Park among 18 places we cover in Greenwich.
Every home in SE9 and SE12 is covered for window seats. Whether you live on a street such as Horsa Road, Court Road and Sidcup Road or on one nearby, we can visit to measure up for window seats. Middle Park is near the A20; on busy main roads, unloading window seats takes a little planning. Close by, we also work in Horn Park (1 mile west), Eltham (1 mile east), Mottingham (1 mile south), Well Hall (1 mile north-east) and Chinbrook (1 mile south). Elsewhere in Greenwich, we also cover Plumstead (3 miles north-east), Greenwich (3 miles north-west), Woolwich (3 miles north), Westcombe Park (3 miles north), Maze Hill (3 miles north-west) and Charlton (3 miles north).
Landmarks near Middle Park
Our area takes in the homes around Colfe's School, Harris Academy Greenwich and The Banker's Draft pub and the streets around them. The closest station to Middle Park is Mottingham station, about 0.5 miles south-east of the centre. A little further out are Prefab Museum (1.9 miles west) and Eltham Community Hospital (0.7 miles north-east). For a walk, there is The Tarn.
Questions we are often asked
Will parking be an issue for fitting furniture in Middle Park?
It can be, as controlled parking zones cover much of inner London. A van may need a visitor’s permit, a paid parking bay or a bay suspension, which the council arranges, often with notice. It helps to let us know about parking at the design visit.
Do you make window seats for homes in Middle Park?
Yes, we work across Greenwich, Middle Park included, and across the rest of London. To get started, you can tell us about the room on our contact form with some details.
Can I send photos ahead of the visit?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot, especially with rough sizes. To send them, message us from the contact page.
Can you fit a window seat under a sash window?
Yes. Seats suit sash windows in many older homes. We measure the cill, the window and any shutters, so the seat fits without getting in the way of the window. Repairs to the window itself are not our work.
Can you add sockets inside the units?
No. Any new wiring, sockets or lights need an electrician, and some electrical work in homes is covered by Part P of the Building Regulations. We’ll design around them.
Can the fitting be on a Saturday?
Yes, by prior arrangement. Let us know when you get in touch if a Saturday suits you best.
Could you do it yourself?
The real difference is in the fit: scribed edges, a level base on an uneven floor and furniture that meets the ceiling, skirting and picture rail. In an older room, standard units rarely manage that.
Shop-bought shelves can sag over a long span. How much a shelf bends depends on its span, depth and load, and long runs need a thicker shelf, a lip along the front or a support. That’s something we plan for in the design.