Example photo by Franco Debartolo on Unsplash, not our project
Greenwich · London
Window seats in Westcombe Park, Greenwich
Window seats for bays and under sash windows, with storage inside, for homes in Westcombe Park. Every piece is made at our workshop and fitted in your home, with a spray or hand-painted finish.
- Unused space below a sash window
- A child’s room that needs storage and seating
- Wanting a seat without blocking the radiator
Need window seats in Westcombe Park?
How we make window seats for Westcombe Park
Many windows have a radiator beneath them. Over a radiator, the seat needs a grille or open front so warmth can reach the room. We design the grille into the front of the seat and leave space around the radiator. We’ll look at your radiator at the measuring visit in Westcombe Park. We make window seats from moisture-resistant MDF and birch plywood, finished by spray or by hand, and people most often get in touch about wanting a quiet place to read and a bay with no furniture that fits.
Newer homes tend to have finished floors that scratch easily, so we cover them while we work. Around Westcombe Park, many homes date from 2000 onwards, and their plasterboard walls need fixings into the studs or made for the board. The storage can sit on its own plinth or be scribed over the skirting.
We write quotes in plain English. They say what will be made, what it is made from and how it will be finished, taken from what we agreed at the visit.
- Location
- Westcombe Park (SE10, SE7, SE3)
- Area
- Greenwich
- Cost
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Where it is made
- In our workshop, then fitted in your home
- Boards and paint
- MDF and plywood, painted to order
- Fitting days
- Weekdays, and Saturdays by arrangement
- Get in touch
- Send us a message
- Updated
- 27 October 2026
Bespoke or off-the-shelf?
Off-the-shelf benches are made for straight walls and square corners, and bay windows rarely offer either. In a bay, a standard bench leaves awkward gaps. A seat made for the window follows every angle. It costs more than a bench, and what you get is a seat that belongs to the room. Large off-the-shelf pieces can make a small room feel smaller, while fitted furniture, painted in a colour that suits the walls, reads as part of the room.
What goes inside matters as much as the outside: drawers take more making than shelves, and each rail, divider or pull-out adds to the work. At the design visit, we work out what you need inside, and the quote follows.
Why choose us
- Work across the whole of London
- Built in our workshop and fitted in your home
- Designed for the room you have
- Moisture-resistant MDF and birch plywood
Take a look at bespoke vs off-the-shelf and how to compare quotes.
From workshop to your room
There isn’t much for you to do on fitting day. We need someone to let us in at the start, and the room should already be cleared, as we will have talked about at the design visit. From there, we protect the floors, bring the furniture in and get on with the fitting. How long the fitting takes depends on whether the seat has drawers, a lift-up lid or a radiator grille, and the fitting days are agreed in your quote. Parking at newer developments can be restricted, with private bays or loading areas, so let us know what applies at the measuring visit. On fitting day, the sections are carried in, assembled and fixed. Saturday fitting is possible by arrangement.
- It starts when you get in touch with a few details about the window, including any radiator under it.
- At the design visit we measure the bay or recess and check the radiator, cill and any shutters.
- A quote in writing follows, with the design, finish and fitting days set out.
- We make the seat, the lids or drawers and any grille in our workshop.
- We bring it to your home, fit it and leave it ready to use. Any radiator grille is fitted so heat can still reach the room.
How to prepare
- Get any new sockets or wiring done by your electrician before fitting day
- Check the building’s rules for trades and lift bookings
- Move furniture and belongings away from the wall
Ask for a quote
Photos help us understand the room before we visit. A few pictures showing the walls, the corners and where the ceiling meets them tell us a lot about the space, particularly with rough measurements. To share them, send us a few details through our contact form, and we’ll arrange a design visit.
Advice
Could you do it yourself?
Off-the-shelf cupboards come in fixed sizes, so there’s usually a gap left over at the top or at one end. Furniture we make is built to the room’s own sizes, so it can run to the ceiling and fill the width.
Cost matters, and it’s fair to say so: flat-pack is usually cheaper to buy. Bespoke earns its place where the room is awkward, space is tight or you want the furniture to look part of the house.
Questions we are often asked
Do you make window seats for homes in Westcombe Park?
Yes. Westcombe Park is one of the places we work, along with the rest of Greenwich and London. To get started, you can fill in our short enquiry form with a few details.
Can parking be tricky on fitting day in Westcombe Park?
It can be, as controlled parking zones cover much of inner London. A van may need a visitor permit, a pay-and-display bay or a suspended bay, which the council arranges, often with notice. Let us know what parking is near you at the measuring visit, so we can plan the day around it.
Can you fit furniture on an external wall?
An outside wall can be colder and damper than an inside one, so we allow for ventilation behind and inside the furniture, which helps avoid condensation and mould. Any damp needs sorting by the right specialist before fitting.
Can you fit furniture to uneven walls?
That is normal in older homes, and it is what scribing is for. Edges are scribed to the wall, and adjustable feet or a plinth bring the furniture up to level.
Should I send photos?
Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot. To send them, fill in our short enquiry form.
How much does a window seat cost?
Every piece is quoted for your room after the design visit. The shape of the window, the mix of drawers and lids, and any grille all play a part. We set it all out in a quote in writing.
Westcombe Park homes and window seats
Homes built before 1919 make up about 37% of the housing in the area around Westcombe Park, with about 37% built since 2000, based on the Valuation Office Agency’s 2025 council tax data. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Entries on the National Heritage List near the centre of Westcombe Park include East Greenwich Library (Grade II), under half a mile north-west, and Church of St John the Evangelist (Grade II), about 0.6 miles south. For a listed home, changes inside that alter its character may need listed building consent from the council, for instance removing or fixing into original panelling. The council’s conservation officer is the person to ask before work starts. The share of homes built before 1919 around Westcombe Park, about 37%, is well above the figure for Greenwich as a whole, about 22%, going by the Valuation Office Agency’s 2025 council tax figures. That makes period details like uneven walls, alcoves and picture rails more likely to shape the design.
For families living near Halstow Primary School, window seats can be planned around what a family needs to keep, from coats and bags to sports kit. For a flat near Westcombe Park station, window seats are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room.
Westcombe Park is within the Royal Borough of Greenwich, about 3 miles east of Plumstead. Homes in Westcombe Park are part of the area we cover for window seats. Westcombe Park is one of the places in Greenwich where we make window seats.
In SE10, SE7 and SE3, the process is the same as anywhere else in London. Whether you live on a street such as Webb Road, Horn Lane and Hardy Road or on one nearby, we can arrange a design visit for window seats. Nearby, we also make window seats in Vanbrugh Park Estate (1 mile south-west), Maze Hill (1 mile west), Greenwich (1 mile west), New Charlton (1 mile north-east) and Charlton (1 mile east). Elsewhere in Greenwich, we also cover Plumstead (3 miles east), Eltham (3 miles south-east), Woolwich (2 miles east), Well Hall (2 miles south-east), Coldharbour (4 miles south) and Kidbrooke (2 miles south-east). Westcombe Park is one of the larger places we cover in Greenwich.
Local landmarks in Westcombe Park
In Westcombe Park, that includes homes near Blackheath High School, The Rose of Denmark pub and Wildwood Montessori School, among other places. There’s a railway station in Westcombe Park itself: Westcombe Park station. Nearby you’ll also find Lewisham Shopping Centre (2 miles south-west) and Greenwich Castle (1 mile south-west). Not far away are Gilbert's Pit.
What prompts window seats in Westcombe Park
Some people want a reading spot. A window seat, perhaps with shelves either side, does exactly that. It is often the most-used seat in the house.
Window seats can help with:
- Wanting a seat without blocking the radiator
- Wanting new furniture to sit well in an older room
- Unused space below a sash window
- An empty bay that does not get used
If you live near East Greenwich Pleasaunce, living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place.
Questions to ask before you hire anyone
- Real projects you can actually look at
- Is it spray painted or hand painted?
- How they handle walls that aren’t straight
- Will the quote be in writing?
Nearby places to Westcombe Park
Also in Westcombe Park
Boards, parts and paint
Moisture-resistant MDF
MDF can be cut cleanly, which suits the angled panels of a bay and the pattern of a grille. The grade we use is moisture-resistant and paints well. Most of what you see on the finished seat is MDF.
Pull-out drawers
Drawers let you see everything at once. Children can usually manage drawers more easily than a heavy lid. We make the boxes from birch plywood for strength.