Example photo by Pete Alexopoulos on Unsplash, not our project
Ealing · London
Alcove Units in Acton Green
Alcove units in Acton Green: cupboards and shelves built into the alcoves beside a chimney breast. Each piece is designed at a visit to your home, made in our workshop and fitted by us.
- Space for a growing book collection
- Storage that suits a period room
- Bare alcoves beside the fireplace
Alcove units for your home in Acton Green
Before and after fitting day
A little care keeps the finish looking good. Here are our suggestions:
- Look for a chimney vent that needs to stay clear
- Measure anything large that must fit inside, such as a record player
- Move things out of the alcoves so we can measure properly
- Think about what you’ll store before we meet
Once the cupboards are filled and in daily use, a door may settle slightly. Hinges can typically be adjusted to bring a door back in line, so a small gap or rub is easy to correct.
Now and then, check handles and hinges are still tight, and adjust any door that starts to catch.
Alcove units in Acton Green: what you get
We work across London, including Acton Green. It starts with a design visit, where we measure the alcoves and go through the design. Then you receive a quote, and once you’re happy the units are made at our workshop and fitted in your home. If your home has units that sit well with original features and room to work in an alcove, that is what alcove units are for, made from birch ply and moisture-resistant MDF, painted by hand or sprayed.
In a Victorian or Edwardian terrace, the front room typically keeps its chimney breast even where the fireplace has gone. That matters around Acton Green, as a large share of the homes there were built before 1919. Alcove units built into the recesses either side are scribed to the plaster and cut around the skirting, so they sit as if they came with the house.
After the design visit, we send you a quote in writing. It sets out the design we’ve talked through, the materials and the finish, so it is clear what’s included.
- Location
- Acton Green (W4, W3, W2)
- Area
- Ealing
- Cost
- Quoted for your room
- How it starts
- Design visit, then a quote in writing
- Made
- Workshop-made, then fitted
- Made from
- Painted MDF and birch ply
- Fitting days
- Weekdays (Saturdays if arranged)
- Contact
- Our contact form
- Updated
- 27 October 2026
FAQs: alcove units in Acton Green
My home in Acton Green is a flat. How do you get the furniture in?
We measure the route in along with the room itself: the stairs, landings, lift and doors. Alcove units are made at our workshop in sections sized to fit that route, then assembled in your flat. If your building has rules on lift booking or working hours, or your lease needs consent for alterations, it is worth checking those early.
Can parking be tricky on fitting day in Acton Green?
It depends on the street, as many London boroughs run controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It helps to tell us about parking at the design visit.
Who moves the sockets behind the alcove units?
That’s a job for your electrician. It is best done before the units go in so the sockets line up with the design. The units are made with cut-outs and cable gaps to suit.
Is an outside wall a problem for fitted furniture?
It needs a little planning: leaving ventilation behind and inside helps stop condensation. Damp treatment is not something we do, so any damp needs sorting first.
Are alcove units spray painted or hand painted?
We offer spray painting in the workshop and hand painting on site. A sprayed finish is very smooth and even, while hand painting suits a softer, traditional look and is simple to touch up. We will help you choose at the design visit.
Do I need to be at home on fitting day?
We need someone to let us in. It also helps to have someone around at the end, so we can go over the finished furniture together.
Alcove units for homes in Acton Green
The biggest shares of homes in the streets around Acton Green were built before 1919 (about 51%) and since 2000 (about 22%), in the VOA’s 2025 council tax stock figures. The age of a home tells us a lot about its walls, floors and ceilings, and so about how alcove units are fixed and fitted. 14 conservation areas have at least part of their area within a mile of central Acton Green. England has around 10,000 in all, and their controls are mostly concerned with the outside of buildings. Since the zone was extended to the outer boroughs in August 2023, the whole of London has been inside the ULEZ. It applies to every van that comes to fit furniture in Acton Green. Access and parking are talked through during the design visit.
For a family home near Ark Priory Primary Academy, low doors that small hands can open, with books and ornaments higher up, suit a busy family room. Hogarth's House, about 0.9 miles south, is one of the historic houses in the wider area. If your own home is a period one, picture rails and cornices give alcove units a line to finish at.
Acton Green is about 2 miles west of Ealing, part of the London Borough of Ealing. We cover Acton Green as part of our work across Ealing, and the process is the same everywhere we work. We list Acton Green among 19 places we cover in Ealing.
Every home in W4, W3 and W2 is within our area for alcove units. Whether you live on a street such as Meon Road, Kent Road and Bollo Lane or on one nearby, we can visit to measure up for alcove units. Neighbouring places we cover for alcove units include Bedford Park (1 mile east), Acton (1 mile north), Acton Vale (1 mile north-east), South Acton (1 mile west) and Hanger Hill (2 miles north-west). Across the rest of Ealing, our area takes in Ealing (2 miles west), Southall (5 miles west), Greenford (4 miles north-west), Northolt (6 miles north-west), Northfields (2 miles west) and South Ealing (2 miles west).
Local landmarks in Acton Green
The streets we cover here include those near Ark Soane Academy, The Duke Of Sussex Public House and Leap Service - the National Autistics Society. Acton Green has its own railway station: South Acton station. A little further out are Asian Music Museum (0.6 miles south-west) and Livat Hammersmith (1.7 miles east).
Places near Acton Green
What else we make in Acton Green
Bespoke or off-the-shelf?
Alcoves vary in depth, and the chimney breast decides how far a unit can come out. Standard cabinets can stand proud of the breast or sit too far back. Bespoke units are made to the depth you want. Recesses in older houses come in every size except the standard ones, so ready-made units rarely fill them properly. Made for the space, the furniture uses the full width and height.
The inside of the furniture affects the price as well: rails, shelves, drawers and dividers all add work. At the design visit, we work out what you need inside.
Why choose Bespoke Carpentry in Acton Green
- Every London borough and the City of London covered
- Scribed to uneven walls
- Built from moisture-resistant MDF and birch plywood
- Finished by spray or by hand
Read how bespoke compares with ready-made or what a quote should include.
What prompts alcove units in Acton Green
Many people ask about alcove units because the alcoves are the most obvious wasted space they have. Standard furniture seldom fits an alcove, leaving gaps at the sides and above. Built-in units use the whole recess up to the ceiling if you want.
Common reasons to get in touch include:
- Furniture that does not fit the alcove
- Walls too uneven for standard furniture
- Units that sit well with original features
- Empty alcoves either side of the chimney breast
If you live in a flat close to South Acton station, check any building rules on lifts and working hours early, and the sections will be sized for the way in.
Before you choose who makes it
- How they deal with uneven walls and floors
- Whether the quote says what the furniture is made from
- Will the doors close with even gaps?
- Whether they can show you real projects they’ve done
Pricing alcove units in Acton Green
Each piece is designed for one room, so each price is too. What affects it comes down to:
- How easy it is to get the furniture into the room
- Spray painting or hand painting
- The width and height of the space
- Parking and unloading on your street
Because every job is different, the cost is set out in a written quote after the visit. The price depends mainly on the size of the piece, how many doors and drawers it has and what goes inside.
Before the design visit
Before the design visit, it helps us to know about:
- Anything fixed to the wall that the furniture needs to work around
- Rough sizes, even if they’re only to the nearest few centimetres
- Pictures of styles you like, if you have any
- The postcode, so we can plan the visit
Pictures help us understand the room before we visit. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space, particularly with rough sizes. To send them over, tell us about the room on our contact form, and we will arrange a design visit.
How fitting works for alcove units
Every fitting follows the same order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. Then the room is tidied and we look over the work with you. The time the fitting takes depends on the size of the alcoves and what goes in them, and the fitting days are set out in your quote. Scribing is done on site, which means some cutting in the room or close by, so we ask for a clear space to work near the room. We keep dust down and tidy as we go. Where the finish is hand-painted, it can be done after the pieces are in.
- It starts with a short message from you about the alcoves.
- We visit to measure the alcoves and go through the design, including the paint finish. You can choose a spray-painted finish from our workshop or a hand-painted one done in your home.
- A quote in writing follows, with the finish written in alongside the design and materials.
- We make the units in our workshop from moisture-resistant MDF, which takes paint well, and birch plywood. If you chose spray painting, that’s done in the workshop too, for a smooth, even surface.
- The units are fitted and scribed to the alcoves.
- New paintwork takes a while to cure fully, so treat the surfaces gently at first.
Before fitting day
- Let us know about any meters, fuse boards or boilers in the area
- Clear the hallway and stairs so the sections can come through
- Keep pets out of the room and the hallway
Ask for a quote
The design visit is where every quote starts. We measure the room properly, check how the walls and floors run and talk through the design with you. A written quote follows the visit for you to look over. To book one, send us a few details through our contact form.