Wandsworth · London
Fitted cupboards in Balham, Wandsworth
Built-in cupboards for hallways, landings, utility rooms and boot rooms, for homes in Balham. We make each piece in our workshop and fit it in your home, with a spray or hand-painted finish.
- Landing shelves for bedding and towels
- Cupboards that suit a period house
- A hallway cupboard for coats and shoes
Fitted cupboards for your home in Balham
Boards, parts and paint
Hand-painted finish
Hand painting in the room lets the cupboards match the surrounding woodwork and is easy to refresh later.
Shelves
Adjustable shelves let you change the layout later if your needs change.
Fitted cupboards for homes in Balham
Few walls in an older house are truly straight, and floors often slope. Every cupboard is scribed, trimmed by hand to meet the wall, then set level on adjustable feet or a plinth. We work around skirting, coving and picture rails, so the cupboard sits comfortably in the room. People usually come to us about cupboards that suit a period house and tidying away the gas and electricity meters, and the answer is made at our workshop from moisture-resistant MDF and birch plywood, spray-painted or hand-painted.
Ceilings and floors in homes built before 1919 are rarely level, and a large share of the homes around Balham date from then. Each piece is scribed and levelled on site so it looks straight in a room that is not. Original skirting and mouldings are met neatly.
A written quote follows the design visit. It sets out the design we’ve talked through, the materials and the finish, so you know exactly what you’re getting.
- Place
- Balham (SW12, SW17, SW4)
- Area
- Wandsworth
- Prices
- Quoted for your room
- First step
- Design visit, then a quote in writing
- Where it is made
- Made in our workshop and fitted on site
- Boards and paint
- Painted MDF and birch ply
- Fitting days
- Weekdays (Saturdays if arranged)
- Get in touch
- Our contact form
- Last updated
- 27 October 2026
Fitting day, step by step
You are welcome to ask questions while we work. The design, materials and finish were settled before anything was made, so the day itself is about careful fitting. How long the fitting takes depends on the number of cupboards and the space they fit into, and we confirm the fitting days in your quote. Parking on terraced streets can be tight, especially in a controlled parking zone, so it helps to tell us at the measuring visit what’s outside. The van is unloaded quickly, with the sections carried straight in. Saturday fitting can be arranged.
- We start with a short note from you about the space and what it needs to hold.
- At the design visit we measure up and talk through doors, shelves and rails. For a boiler cupboard, we plan for the clearances and ventilation in the manufacturer’s instructions.
- We send a quote that sets out the design, the materials and the finish, for you to read through.
- The cupboards are made at our workshop, from moisture-resistant MDF and birch plywood.
- The cupboards are fitted in your home and trimmed to follow the walls. We check each door and shelf with you before we leave.
Before we arrive
- Arrange any electrical changes with your electrician beforehand
- Take anything hanging off the wall we are fitting to
- Keep pets out of the room and the hallway
Arranging a design visit
To make a start, use our contact form and let us know which room you have in mind and what you want the furniture to do. We then arrange a design visit to measure and go through the design, and send you a written quote afterwards.
Read more
Where other trades come in
We’d rather be clear about where our work stops:
- Plumbing for washing machines or sinks (your plumber)
- Relocating meters or the fuse board
- Work on a boiler, which is for a Gas Safe registered engineer
If in doubt, you can send us a few details through our contact form and describe the room. Our process from visit to fitting.
What it is made from
- Hand-painted finish
- Spray-painted finish
- Ventilated doors
- Birch plywood
- Adjustable shelves
- Moisture-resistant MDF
Questions from Balham
My house in Balham is Victorian. Can you deal with uneven walls?
Yes. Walls in older houses are rarely flat or square, and floors are often out of level, so each piece is scribed to follow the wall and set level on a plinth or adjustable feet. We also work around skirting boards, picture rails and cornices. Fixings are chosen for the wall, whether solid brick or lath and plaster.
Will a conservation area stop me having fitted cupboards fitted in Balham?
Not normally. Conservation area controls are mostly concerned with the outside of buildings, so fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
Is an outside wall a problem for fitted furniture?
It needs a little planning: leaving ventilation behind and inside helps stop condensation. We do not treat damp, so any damp should be sorted before fitting day.
Can you hide my gas and electricity meters?
Yes. We can build a cupboard that hides them neatly and still leaves them reachable. We don’t move meters or fuse boards; that’s for your supplier or an electrician.
Do I get to choose the colour?
You choose it. Spray and hand-painted finishes both use the colour you’ve chosen.
Is the furniture spray painted or hand painted?
You can choose between two finishes: spray painted or hand painted. Spray painting gives a smooth, even finish, and hand painting is easy to touch up.
Neighbourhoods near Balham
What else we make in Balham
Balham homes and fitted cupboards
Homes built before 1919 make up about 64% of the housing in the area around Balham, with about 9% built between 1919 and 1939, in the VOA’s 2025 council tax stock figures. It is a good starting point, though every room is still measured, as two homes of the same age rarely match. Entries on the National Heritage List near the centre of Balham include Church of St Mary (Grade II), less than half a mile south-west, and The Bedford Hotel (Grade II), less than half a mile east. For a listed home, works inside that affect its character may need listed building consent from the council, for instance removing or fixing into original panelling. It’s worth speaking to the council’s conservation officer before the design is final. About 64% of homes in the streets around Balham were built before 1919, going by the Valuation Office Agency’s 2025 council tax figures. Older homes tend to have awkward recesses and uneven walls, which is where fitted cupboards help, with each one scribed to the wall.
For a flat near Balham station, it is useful to book the lift and tell the concierge before fitting day. Carlyle's House, about 2.9 miles north, is one of the historic houses in the wider area. If your own home is a period one, hallway recesses and alcoves are where fitted cupboards earn their keep.
Balham is about 2 miles north-west of Clapham Junction, in the London Borough of Wandsworth. We cover Balham as part of our work across Wandsworth, and the process is the same everywhere we work. Balham is one of the places in Wandsworth where we make fitted cupboards.
Every address in SW12, SW17 and SW4 is covered for fitted cupboards. Our area takes in homes on streets like Lynn Road, Weir Road and Byrne Road, for fitted cupboards and any of our other fitted furniture. Close by, we also work in Grange Mills (1 mile north-east), Hyde farm estate (1 mile east), Clapham Park (1 mile north-east), Streatham Park (1 mile south-east) and Tooting Bec (1 mile south-west). Elsewhere in Wandsworth, we also cover Clapham Junction (2 miles north-west), Battersea (2 miles north-west), Putney (3 miles north-west), Wandsworth (2 miles north-west), Southfields (2 miles west) and Summerstown (2 miles south-west).
Around Balham
We fit furniture in homes around Chestnut Grove Academy, Oak Lodge School and The Bedford pub. There is a railway station in Balham itself: Balham station. Well-known places in the area include Southside Wandsworth (1.9 miles north-west) and London Sewing Machine Museum (0.6 miles south-west).
Do you need fitted cupboards in Balham?
Some people want to hide a boiler, meter or fuse board. They are not much to look at, yet they must stay easy to reach, so a cupboard has to be designed around them. We plan the doors, panels and ventilation with that in mind.
Most of the enquiries we get are about needs like these:
- A cupboard for the meters with easy access
- Somewhere for coats, shoes and bags
- Tall cupboards where space is short
- Making use of an awkward alcove or corner
Close to Wandsworth Common? Fitted cupboards can be designed to hold outdoor kit, from walking boots to picnic things.
Before you hire any carpenter
- How they handle walls that aren’t straight
- Have they measured the stairs, lift and doorways?
- Will the quote be in writing?
- Whether the quote follows a visit to your home
DIY, flat-pack or bespoke
Bespoke work comes into its own in rooms that are not square. Older London rooms tend to have leaning walls, sloping floors and alcoves of different widths.
Long shelves are where off-the-shelf often struggles. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. That is something we plan for in the design.