Example photo by Franco Debartolo on Unsplash, not our project
Ealing · London
TV and Media Units in Acton Vale
Planning TV and media units for a home in Acton Vale? It starts with a design visit to measure and talk through ideas, then a written quote.
- Wasted space around the screen
- Leads that show from every angle
- A cabinet that traps heat
Ask about TV and media units in Acton Vale
TV and media units in Acton Vale
Hiding the cables is often the main aim. Cable routes are built into the design from the start, with openings and removable panels so you can add or swap leads later. We make the routes, and your electrician handles any wiring. We make TV and media units from moisture-resistant MDF and birch plywood, finished by spray or by hand, and people most often get in touch about set-top boxes stacked on a stand and empty alcoves beside the TV.
A large share of the homes around Acton Vale were built before 1919, which in London mostly means Victorian and Edwardian houses. Houses of that age usually have a chimney breast in the front and back reception rooms, with an alcove either side, which gives TV and media units an obvious place to go. Walls are rarely flat, so each piece is scribed to the plaster and set level on a plinth or adjustable feet, then cut neatly around the skirting and any picture rail or cornice.
The written quote is your record of the job. It sets out the TV unit designed for your room, its materials and its finish.
- Place
- Acton Vale (W12, W3, W4)
- Area
- Ealing
- Prices
- Quoted for your room
- First step
- A design visit: we measure and talk it through
- Where it is made
- Made in our workshop and fitted on site
- Boards and paint
- MDF and birch plywood, painted
- Working days
- Weekdays (Saturdays if arranged)
- Enquiries
- Send us a message
- Last updated
- 27 October 2026
Your questions about TV and media units in Acton Vale
Will a conservation area stop me having TV and media units fitted in Acton Vale?
Not normally. Conservation area controls are mostly concerned with the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, works inside that affect its character may need listed building consent, so check with the council first. If you are unsure, the council can confirm.
I live near Acton Central station. Is that in your area?
Yes, homes across Ealing and the rest of London are within the area we cover. You can fill in our short enquiry form to arrange a design visit, and tell us about parking and access at the same time.
Can I send pictures ahead of the visit?
Yes. They give us a feel for the space before we visit, along with rough sizes. It helps to show radiators, sockets and anything else on the wall.
Can you fit furniture to uneven walls?
That’s normal in older homes, and it’s what scribing is for. Edges are scribed to the wall, and adjustable feet or a plinth bring the furniture up to level.
Do I need to be in when you fit?
We need access, so someone has to let us in. You do not need to watch us work, but it is useful to be around at the end.
Is the furniture spray painted or hand painted?
You can choose between two finishes: by spray or by hand. Spray painting gives a smooth, even finish, and hand painting is easy to touch up.
Nearby places to Acton Vale
More for homes in Acton Vale
Bespoke or off-the-shelf?
A bespoke unit isn’t instant: it needs a design visit, a quote and workshop time. For a short stay, a standalone stand can make more sense. Standard furniture is drawn for modern rooms, so its proportions can look odd in a tall period room, whereas fitted pieces can pick up the room’s height and mouldings, with panels and details to suit the house.
In London, parking can affect the price. Much of London is covered by controlled parking zones, so we may need a visitor permit, a paid bay or a suspended bay near your home. It helps to talk about parking during the design visit, so we can plan for it.
What you get with us
- A spray or hand-painted finish
- Work across the whole of London
- Saturdays by arrangement
- Scribed to uneven walls
Take a look at our comparison of bespoke and off-the-shelf and what to look for in a quote.
The problems TV and media units solve
Others are tired of furniture that does not fit. Standard TV stands rarely suit an awkward wall, and a bespoke unit is made for the space.
People usually get in touch with us about needs like these:
- A tangle of wires behind the TV
- Clutter around the TV
- A big screen that dominates the wall
- Boxes with no ventilation
Emery Walker's House, about 1.2 miles south, is one of the historic houses in the wider area. For a period home anywhere nearby, picture rails and cornices give TV and media units a line to finish at.
Before you choose who makes it
- Whether you will get a quote in writing, not just a figure
- Where they’ll park and unload
- Are the boards named, such as MDF or plywood?
- Which parts of the job need an electrician or a plumber
Flat-pack or bespoke?
The real difference is in the fit: edges scribed to the wall, a level base on a sloping floor and a neat line where the furniture meets the ceiling. Off-the-shelf furniture can’t usually do that in an older room.
Flat-pack and off-the-shelf furniture has its place. In a room with square walls and standard sizes, it can work well.
TV and media units for homes in Acton Vale
The biggest shares of homes in the area around Acton Vale were built before 1919 (about 49%) and since 2000 (about 21%), going by the Valuation Office Agency’s 2025 council tax figures. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. Entries on the National Heritage List near the centre of Acton Vale include St Saviour's Church and Institute (Grade II), less than half a mile north-east, and Victoria Junior School (Grade II), under half a mile south-east. Where a home is listed, listed building consent can be needed for inside works that affect its character, such as fixing into original panelling. It is worth speaking to the council’s conservation officer before the design is final. About 49% of homes in the streets around Acton Vale were built before 1919, in the VOA’s 2025 council tax stock figures. In houses of that age, the chimney breast often becomes the TV wall, with cupboards in the alcoves for set-top boxes and speakers, with cable routes and ventilation planned in.
If you live near Wormholt Park, TV and media units can be arranged to keep the window and the light clear. For families living near Wendell Park Primary School, low doors that small hands can open, with books and ornaments higher up, suit a busy family room.
Acton Vale is in the London Borough of Ealing, about 3 miles west of Ealing. Homes in Acton Vale are part of the area we cover for TV and media units. Our Ealing coverage includes Acton Vale.
Design visits and fitting in W12, W3 and W4 work the same way as everywhere else we cover. You’ll find streets here such as Shaa Road, Vyner Road and Emlyn Road, and we cover homes on all of them for TV and media units. We also cover Bedford Park (1 mile south-west), Acton (1 mile west), Acton Green (1 mile south-west), White City (1 mile east) and Shepherd's Bush (1 mile east). Other parts of Ealing we cover include Ealing (3 miles west), Southall (5 miles west), Greenford (5 miles north-west), Northolt (6 miles north-west), Northfields (3 miles west) and South Ealing (2 miles west).
Around Acton Vale
Around Acton Vale, we cover homes near Phoenix Academy, Princess Victoria Pub and Library for Iranian Studies and the streets around them. Acton Vale’s nearest station is Acton Central station, about 0.5 miles west. Nearby you will also find Queen Charlotte's and Chelsea Hospital (0.9 miles north-east) and Westfield London (1.3 miles east).
How fitting works for TV and media units
Furniture made in a workshop still has to meet the room it’s going into, and fitting day is where that happens. Few walls in older London homes are truly flat or square, so we scribe the edges by hand to follow the wall, until the line is tight. How long the fitting itself takes depends on the length of the TV wall and what it needs to hold, and we confirm the fitting days in your quote. In a period home, the furniture is fitted to walls that aren’t straight, so there’s some trimming and adjusting on site. We protect the floors and keep dust to a minimum. Parking can be tight on terraced streets, so let us know about permits and bays at the measuring visit.
- You send us some details about the TV, the boxes and the speakers you use, including the size of the screen.
- We come to measure, note the sockets and agree the layout.
- Your quote follows, with the design, materials and finish set out, ready for you to check.
- The unit is built in our workshop, using moisture-resistant MDF and birch plywood.
- We fit it in your home, with the cable routes ready to use.
Before we arrive
- Make sure pets are kept safely away
- Arrange any electrical changes with your electrician in advance
- Book any lift and let the concierge or building manager know
Ask for a quote
Pictures help us understand the room before we visit. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space, especially with rough sizes. To send them over, send us a few details through our contact form, and we’ll suggest a time for a design visit.
Related advice
Looking after your furniture
Painted fitted furniture is easy to look after. A few things help it stay looking good:
- Note the size of each box and speaker
- Think about whether you want the screen on a bracket or on a shelf
- Let us know about access early
- Think about whether you’ll upgrade the screen
Vents and equipment shelves gather dust, so clean them now and then. Clear vents keep equipment cooler.
Avoid piling devices on one shelf because heat builds up between them. Give each its own space.