Example photo by Franco Debartolo on Unsplash, not our project
Merton · London
TV and Media Units in Lower Morden
Built-in TV walls and media cabinets, for homes in Lower Morden. We make each piece in our workshop and fit it in your home.
- A TV that looks out of place in the room
- Nowhere good for speakers
- Leads that show from every angle
TV and media units for your home in Lower Morden
TV and media units for homes in Lower Morden
The biggest shares of homes in the area around Lower Morden were built between 1919 and 1939 (about 85%) and between 1945 and 1972 (about 6%), according to Valuation Office Agency council tax figures (2025). Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. The centre of Lower Morden is within about a quarter of a mile of the Upper Morden Conservation Area. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house does not normally need permission. Your council can advise if you are unsure. Controlled parking zones are common across London, and Merton sets its own rules. Where a street in Lower Morden is controlled, a van may need a visitor permit, a paid bay or a bay suspension from the council. Let us know about parking during the design visit.
The wider area includes historic houses such as Southside House, about 2 miles north. For a period home anywhere nearby, the alcoves beside a chimney breast are the natural place for TV and media units. If you live in a flat close to St Helier station, TV and media units are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room.
Lower Morden is about 2 miles north of Wimbledon, in the London Borough of Merton. We work across all London boroughs and the City of London, and Lower Morden is part of that. Our Merton coverage includes Lower Morden, along with the rest of the borough.
Every address in SM4, SM3 and KT4 is covered for TV and media units, from the main roads to the quieter streets. We cover homes on streets such as Ash Road, Bow Lane and Garth Road, along with the roads around them, whether you want TV and media units or another piece made for the room. Close by, we also work in Morden (1 mile north-east), Sutton Common (1 mile east) and North Cheam (1 mile south). We also make TV and media units in nearby places like Wimbledon (2 miles north), Colliers Wood (3 miles north-east), Eastfields (3 miles north-east), South Wimbledon (2 miles north-east), Merton Abbey (2 miles north-east) and Wimbledon Chase (2 miles north).
Local landmarks in Lower Morden
The streets we cover here include those near Merton College, Lord Nelson pub and Glenthorne High School and the streets around them. The nearest railway station is St Helier station, roughly 0.9 miles east. Nearby you’ll also find St. Anthony's Hospital (0.6 miles south). Not far away are Derwent Floodwash.
TV and media units in Lower Morden: what you get
Sockets often need to move for a built-in TV wall, such as behind the screen or in the equipment cupboard. That job is for your electrician, and some electrical work in homes falls under Part P of the Building Regulations. Ideally it is done before the unit goes in. Typical reasons to get in touch are a tangle of wires behind the TV and boxes with no ventilation; the furniture is made from moisture-resistant MDF and birch plywood, finished by spray or by hand.
Plenty of semis and interwar houses have been extended at the back or had the back rooms knocked through, and around Lower Morden, interwar houses, semis and detached homes make up a large share of the housing. A long through room gives TV and media units a whole wall to work with. An extension’s plasterboard walls need different fixings from the original brick or block.
Materials are named in the quote: moisture-resistant MDF and birch plywood, each used where it suits the job. The finish is stated too, whether that is spray painting or hand painting.
- Where
- Lower Morden (SM4, SM3, KT4)
- Borough
- Merton
- Prices
- Quoted for your room
- First step
- We visit, measure, then quote
- Where it is made
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- Fitting days
- Weekdays (Saturdays if arranged)
- Enquiries
- The contact form
- Last updated
- 27 October 2026
The problems TV and media units solve
Open-plan living is another reason. Built-in furniture makes that wall look planned.
If you recognise any of these, it is worth talking to us:
- Speakers muffled behind doors
- Wasted space around the screen
- A TV stand that doesn’t fit the wall
- Equipment running hot in a closed cupboard
Close to Cannon Hill Common? TV and media units can be planned to frame a window with a view rather than block it.
Before you choose who makes it
- Whether the quote follows a visit to your home
- Which parts of the job need an electrician or a plumber
- Will the doors close with even gaps?
- How the furniture will be finished, and where
Tips worth knowing
Getting the most from TV and media units starts with the planning and carries on after fitting day. These are worth keeping in mind:
- Think about whether you’ll upgrade the screen
- Book your electrician first if sockets need to move
- Note which boxes need line of sight for their remotes
- List every box, console and speaker that needs a home
Once your equipment is in, check that it is not running hot. Keep vents, gaps and open backs clear of cables and clutter.
Ask your electrician about new sockets rather than running extension leads through the unit, and do not daisy-chain adaptors.
Also near Lower Morden
What else we make in Lower Morden
FAQs: TV and media units in Lower Morden
Do I need permission for fitted furniture in a conservation area?
Normally not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house does not normally need planning permission. Listed buildings are different, as works inside that affect their character can require listed building consent from the council. The council’s planning or conservation team can tell you if in doubt.
Will parking be an issue for fitting furniture in Lower Morden?
It depends on the street, as many London boroughs run controlled parking zones. A van may need a visitor’s permit, a paid parking bay or a bay suspension, which the council arranges, often with notice. Let us know what parking is near you at the design visit, so the day can be planned around it.
Who chooses the colour?
You do. The paint colour is agreed with you, and it’s set out in the quote.
Do you work in Lower Morden?
Yes. We work across all 32 London boroughs and the City of London, Lower Morden included.
Can you fit furniture to uneven walls?
Uneven walls are normal in older London homes, and the furniture is made to deal with them. We scribe the edges to follow the wall and set the furniture level on adjustable feet or a plinth.
Can you come on a Saturday?
Yes, by arrangement. Tell us when you contact us if a Saturday suits you best.
How fitting day works
Before anything is fixed, we set the furniture level. Floors are often out of level, so adjustable feet or a plinth take up the difference, which keeps the lines straight. After that, it is fixed to the wall using fixings that suit the wall, whether that’s solid brick, lath and plaster or plasterboard. In a 1920s or 1930s house, the hall and stairs are typically simple, but the route in is still measured, not just the room. The furniture comes in sections and is put together where it is going, with floors protected throughout.
- You send us some details about the TV, the boxes and the speakers you use, including the size of the screen.
- At the design visit, we measure up and plan the screen space, cable routes and ventilation with you. New sockets or wiring are for your electrician, so it helps to have them in mind early.
- You receive a quote in writing setting out the unit, materials and finish.
- We make the cupboards, shelves and panels in our workshop.
- We install the unit, leaving the cable routes and vents clear. We check the doors and shelves with you before we leave.
Getting ready for fitting day
- Empty the space we will be working in
- Tell us about any meters, fuse boards or boilers in the area
- Take anything hanging off the wall we are fitting to
Starting with a design visit
To make a start, tell us about the room on our contact form and let us know which room you have in mind and what you want the furniture to do. From there, we arrange a design visit to measure up and talk through your ideas, and send you a quote in writing afterwards.
Read more
Where other trades come in
We’d rather be clear about where our work stops:
- Repairing plaster or redecorating
- New sockets behind the TV, which need an electrician
- Structural changes to the wall
If you’re not sure what’s possible in your room, you can send us a few details through our contact form and we’ll give you a straight answer before you arrange a visit. Our process from visit to fitting.
What it’s made from
- Moisture-resistant MDF
- Hand-painted finish
- Spray-painted finish
- Birch plywood
- Ventilated cabinets
- Cable routes
What affects the cost of TV and media units
Several things affect the price:
- Doors and drawers, and how many
- Whether you choose a spray or hand-painted finish
- Stairs, lifts and the route to the room
- The overall size of the piece
The finish affects the cost: spray painting is done in the workshop, while hand painting can be done on site. Your choice, along with the size and the fittings, is reflected in the written quote.
Before the design visit
The more you can tell us at the start, the better the design visit goes. When you contact us, it helps to send:
- Any ideas or images you have saved
- A few pictures of the space, taken from the doorway and from each corner
- How you want to use the space
- Rough measurements: width, height and depth
Rough sizes are fine at the start. We measure everything properly at the measuring visit. To arrange it, get in touch through our contact form with a few details about the room. You receive a written quote after the visit.