Example photo by Olena Bohovyk on Unsplash, not our project
Havering · London
Gallows Corner Walk-in Wardrobes
We make walk-in wardrobes in moisture-resistant MDF and birch plywood for homes in Gallows Corner. Each piece is finished by spray or by hand, in the colour you choose.
- A dressing area in part of a bedroom
- Shelves for shoes and bags
- A walk-in wardrobe in a box room
Walk-in wardrobes in Gallows Corner
How we make walk-in wardrobes for Gallows Corner
You don’t need a spare room to have a walk-in wardrobe. A corner or one end of a large bedroom can become a dressing area, either open to the room or behind doors. Building a new stud partition is building work, so that’s for your builder, while we make and fit the furniture. We make walk-in wardrobes from birch ply and moisture-resistant MDF, painted by hand or sprayed, and people most often get in touch about a built-in dressing table and hanging for coats, dresses and shirts.
A bedroom in a house from between the wars normally has simpler mouldings than a Victorian one, so fitted furniture can often run neatly to the ceiling. If yours is one of the interwar houses or semis that make up much of the housing around Gallows Corner, high cupboards make a good home for suitcases and spare bedding. The skirting is scribed around rather than removed.
The furniture is made in our workshop after you’ve had the quote and decided to go ahead. The quote sets out the agreed design, materials and finish, so you can check every detail beforehand.
- Location
- Gallows Corner (RM3, RM2, RM11)
- Borough
- Havering
- Cost
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Made
- Made in our workshop and fitted on site
- Made from
- MDF and birch plywood, painted
- Fitting days
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Page updated
- 27 October 2026
What prompts walk-in wardrobes in Gallows Corner
The most common reason is simply running out of wardrobe space. Clothes are squashed together and shoes pile up. A dressing room spreads it all out so you can see it.
We’re often asked to help with:
- A dressing area in part of a bedroom
- Storage for clothes that have outgrown the wardrobe
- Room for two wardrobes in one space
- Moving wardrobes out of the bedroom
Hare Hall, about 0.5 miles south, is one of the historic houses in the wider area. If your own home is a period one, solid external walls can be cold, so ventilation behind walk-in wardrobes is part of the design.
Before you hire any carpenter
- Have they thought about parking near you?
- Who does any electrics, plumbing or gas work
- Whether the quote says what the furniture is made from
- Have they measured the stairs, lift and doorways?
Questions from Gallows Corner
Will parking be an issue for fitting furniture in Gallows Corner?
It can be, depending on whether your street is in a controlled parking zone. A van may need a visitor permit, a pay-and-display bay or a suspended bay, which the council arranges, often with notice. It helps to let us know about parking at the design visit.
Can you fit furniture in a home close to Gidea Park station?
Yes, homes across Havering and the rest of London are within the area we cover. You can get in touch through our contact form to arrange a design visit.
Is ventilation important in a dressing room?
Yes, it helps avoid condensation and mould. The design allows air to circulate and walls should be dry before we fit.
Can you fit furniture on an external wall?
External walls can be colder and damper than internal ones, so ventilation behind and inside the furniture helps to avoid condensation. Any damp needs sorting by the right specialist before fitting.
What happens at the measuring visit?
We measure the space and discuss the design, materials and finish. We also check the walls and floors and note radiators, sockets and other things in the way, then send a written quote.
Do I need planning permission for fitted furniture?
Not normally. Conservation area controls are mostly concerned with the outside of buildings, and furniture inside a house doesn’t normally need it. In a listed building, check with the council’s conservation officer before any work.
What affects the cost of walk-in wardrobes
What it costs comes down to the materials and the time involved. That depends on:
- Doors and drawers, and how many
- Walls and floors that are out of level or out of square
- Where a van can park, such as a permit bay or a bay suspension
- The overall size of the piece
In London, parking can affect the price. Much of London is covered by controlled parking zones, so a van may need a visitor permit, a paid bay or a bay suspension. Tell us about parking during the design visit, so we can plan for it.
Helping us understand the room
Ahead of the design visit, we will usually ask about:
- Whether it is a house or a flat, and if there are stairs or a lift
- Photos of the whole wall or room, including the floor and ceiling
- The postcode, so we can plan the visit
- Examples of the look you are after
If you already have something in mind, tell us; if not, we can work it out together at the visit. The design is talked through at the visit, once we have measured, and the written quote then sets it out. To start, drop us a line using the contact form.
Is bespoke worth it?
Neither choice is right for every home. For a simple space, off-the-shelf can do the job. For tricky rooms, period homes or a built-in look, a bespoke design tends to earn its place. Ready-made units come in standard depths that rarely suit every space, which may be too deep for one spot and too shallow for another. Fitted furniture is made to the depth the space can take.
Every room is priced on its own, because size, layout and finish change from job to job. A spray finish and a hand-painted finish involve different work, and that shows in the price. The figure comes in your written quote after the design visit.
Why us?
- A design visit, then a written quote
- 300+ projects completed
- Built from moisture-resistant MDF and birch plywood
- Designed for the room you have
Flat-pack or bespoke?
Where bespoke earns its keep is in rooms that are not square. Older London rooms tend to have leaning walls, sloping floors and alcoves of different widths.
Cost matters, and it’s fair to say so: off-the-shelf furniture usually costs less up front. Bespoke earns its place where the room is tricky, space is tight or you want the furniture to look part of the house.
Walk-in wardrobes in Gallows Corner: local notes
Homes built between 1919 and 1939 make up about 37% of the housing in the area around Gallows Corner, with about 37% built between 1945 and 1972, based on the Valuation Office Agency’s 2025 council tax data. We take that into account at the measuring visit, since older and newer walls take different fixings. Near the centre of Gallows Corner, Historic England’s list includes The Royal Liberty School (Grade II*), about 0.5 miles south. For a listed home, changes inside that alter its character may need listed building consent from the council, for example removing or fixing into original panelling. Check with the council’s conservation officer first. Strict stopping rules apply on red routes, which TfL runs. If your home in Gallows Corner is on or near a main road, tell us during the design visit. We will plan where the van can stop.
If your home is one of the older houses near St Michael and All Angels Church, solid external walls can be cold, so ventilation behind walk-in wardrobes is part of the design. If you live in a flat close to Gidea Park station, check any building rules on lifts and working hours early, and the sections will be sized for the way in.
Gallows Corner is about 2 miles south-west of Romford, within the London Borough of Havering. From period terraces to newer flats in Gallows Corner, we measure the room as it is and design around it. We cover places right across Havering, from the busiest high streets to quiet residential roads.
We work across the RM3, RM2 and RM11 postcode area for walk-in wardrobes. You’ll find streets here such as Ewan Road, Briar Road and Bell Avenue, and homes on each of them are within our area for walk-in wardrobes. Close by, we also work in Gidea Park (1 mile west), Ardleigh Green (1 mile south), Heath Park (1 mile south), Emerson Park (1 mile south-east) and Hornchurch (2 miles south). Elsewhere in Havering, we also cover Romford (2 miles south-west), Elm Park (3 miles south), Collier Row (2 miles west), Rainham (5 miles south), Upminster (3 miles south-east) and South Hornchurch (5 miles south). Being one of the larger places in Havering, Gallows Corner is covered for walk-in wardrobes and everything else we make.
Landmarks near Gallows Corner
We fit furniture in homes around Havering College of Further and Higher Education, The Ship Public House and Ardleigh Green Junior School, among other places. The nearest railway station is Gidea Park station, roughly 0.8 miles south-west of the centre. Nearby you will also find Harold Wood Hospital (0.6 miles east) and The Mercury Mall (1.5 miles south-west). For a walk, there is Bedfords Park.
What happens on fitting day
When we arrive on fitting day, we start by protecting your floors and the route from the front door to the room. The sections made at our workshop come in next, one at a time. The time the fitting takes depends on the room and how much is fitted into it, and the fitting days are agreed in your quote. In a 1930s house with a converted loft, the stairs to the loft room are often steeper than the main flight, so any section going up there is sized for them. The main stairs in houses of that age are typically straighter. Each section is assembled and fixed in the room.
- You get in touch and describe the room.
- At the design visit we agree the layout and check how the units will reach the room. It’s useful to mention parking then, as much of London has controlled parking zones.
- We send a quote in writing.
- In our workshop we build the units in sections from moisture-resistant MDF and birch plywood.
- We carry the sections in, join them in the room and scribe them to the walls. The finish is sprayed beforehand or painted by hand on site.
Before fitting day
- Leave a clear route from the front door to the room
- Arrange any electrical changes with your electrician ahead of time
- Book any lift and let the concierge or building manager know
Arranging a design visit
We quote once we’ve seen the room. We measure the space, check the walls and floors and discuss what you’d like, then send a written quote. There’s no price list: each design is priced in writing after we’ve seen the space. To book a design visit, send us a few details through our contact form.