Example photo by Franco Debartolo on Unsplash, not our project
Barnet · London
The Hale Window Seats
We make window seats for homes in The Hale, designed around the room you have. Your window seat is designed at a visit to your home and made in our workshop.
- A ready-made bench that doesn’t fit the bay
- Nowhere to keep blankets, toys or books
- Wanting a seat without blocking the radiator
Window seats for your home in The Hale
Window seats in The Hale: what you get
Window seats work in bedrooms and children’s rooms as well as living rooms. Drawers or a lift-up lid turn it into storage as well as seating. For children’s rooms, drawers are often easier for small hands than a heavy lid. In The Hale, the design visit is where the details are settled. If you’re living with a bay with no furniture that fits and off-the-shelf pieces that never quite fit the window, window seats made from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish can solve it.
Landings in houses from between the wars are often roomier than in a Victorian terrace, and that space can take shallow fitted storage. Around The Hale, where interwar homes and semis are a big part of the housing, the landing is worth a look as well as the hall. Any boiler or hot water cylinder keeps the access and ventilation its maker asks for.
Once you’ve read the quote and decided to go ahead, the furniture is built in our workshop. The quote sets out the agreed design, materials and finish, so you can check every detail beforehand.
- Location
- The Hale (HA8, NW7)
- Borough
- Barnet
- Price
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Making
- Made in our workshop and fitted on site
- Materials and finish
- MDF and birch plywood, painted
- Working days
- Weekdays, and Saturdays by arrangement
- Contact
- The contact form
- Last updated
- 27 October 2026
The problems window seats solve
Parents often want a window seat for a child’s room, with toy storage below. Drawers make it easy for children to reach their things. It also keeps the floor clear.
Window seats can help with:
- Nowhere to keep blankets, toys or books
- Off-the-shelf pieces that never quite fit the window
- Wanting a seat without blocking the radiator
- A room with shutters and sashes that deserves a proper seat
If you live in a flat close to Mill Hill Broadway station, the route in is measured not just the room, and the sections are sized to fit it.
What to check before you book
- Have they thought about parking near you?
- How doors and drawers are fitted
- Which materials they’ll use, named in the quote
- Have they measured the stairs, lift and doorways?
Window seats for homes in The Hale
In the area around The Hale, the largest groups of homes date from between 1919 and 1939 (about 58%) and between 1945 and 1972 (about 14%), going by the Valuation Office Agency’s 2025 council tax figures. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Entries on the National Heritage List near the centre of The Hale include John Keble Church (Grade II), less than half a mile south. For a listed home, works inside that affect its character can need listed building consent from the council, for example removing or fixing into original panelling. It’s worth speaking to the council’s conservation officer before the design is final. London’s red routes are run by TfL, and stopping on them is tightly controlled. If you live on or close to a main road in The Hale, let us know during the design visit. Then we can work out where to load and unload.
Close to Stoneyfields Park? Living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place. For a family home near Mathilda Marks-Kennedy Jewish Primary School, a place for each person’s coat and shoes stops the hallway filling up.
The Hale is in the London Borough of Barnet, about 4 miles east of Finchley. From period terraces to newer flats in The Hale, we measure the room as it is and design around it. Our Barnet coverage includes The Hale, along with the rest of the borough.
We cover every part of HA8 and NW7 for window seats. Whether you live on a street like Hale Lane, Farm Road and Dean's Lane or on one nearby, we can visit to measure up for window seats. Main roads around The Hale include the A5100. We also cover Edgware (1 mile west), Broadfields Estate (1 mile north-west), Burnt Oak (1 mile south), Mill Hill (1 mile east) and Edgware Bury (1 mile north-west). Other parts of Barnet we cover include Finchley (4 miles east), Barnet (4 miles north-east), East Finchley (4 miles south-east), Hendon (3 miles south-east), Whetstone (4 miles east) and Friern Barnet (5 miles east).
Local landmarks in The Hale
Our area takes in the homes around St Martin's School Brentwood, Rising Sun pub and The Northgate School, among other places. The Hale’s nearest station is Mill Hill Broadway station, about 0.7 miles south-east of the centre. A little further out are Edgware Community Hospital (1 mile south-west) and Broadwalk Centre (0.8 miles south-west). For a walk, there’s Mill Hill Old Railway Nature Reserve.
Places near The Hale
More for homes in The Hale
Flat-pack or bespoke?
Off-the-shelf cupboards come in fixed sizes, so there is often a strip of wasted space at the side or above. Fitted furniture is made to the room’s measurements, so it can use the full height and width.
It’s worth being honest about cost: flat-pack is usually cheaper to buy. Bespoke earns its place where the room is tricky, space is tight or you want the furniture to look part of the house.
Bespoke window seats or ready-made?
Standard storage benches come in set sizes. A seat made for your window can use the full width and depth of the bay or recess, with drawers, a lift-up lid or a mix below. Ready-made units come in standard depths that rarely suit every space, which may be too deep for one spot and too shallow for another. With fitted furniture, the depth is chosen for the room.
The inside of the furniture affects the price as well: rails, shelves, drawers and dividers all add work. We will talk through what you need inside during the design visit.
What you get with us
- Spray painted or hand painted, in the colour you choose
- Saturday visits and fitting by arrangement
- 300+ projects completed
- Every London borough and the City of London covered
From workshop to your room
Every fitting follows the same order: floors are protected, the sections come in, everything is levelled, scribed to the walls, fixed and finished. At the end, we tidy up and go over the work with you. How long the fitting takes depends on the shape of the bay or recess and what goes under the seat, and your quote sets out the fitting days. A front path or side gate can make the carry from the van simpler. Gates, paths and steps up to the door are part of the route we measure. Floors are covered from the door to the room, and the sections are assembled in place.
- You get in touch and let us know about the window and the room.
- We visit to measure the window and discuss the design.
- You receive a written quote for the seat we’ve discussed.
- Your window seat is made at our workshop, shaped to the window. We use moisture-resistant MDF and birch plywood.
- The seat is fitted in your home and checked so the lids and drawers run well.
Before we arrive
- Take anything hanging off the wall we are fitting to
- Clear the area where the furniture is going
- Mention any parking restrictions on your street
How to get a quote
You don’t need exact measurements to get started. Everything is measured properly when we visit. To get started, send us a few details through our contact form. You receive a quote in writing after the visit.
Advice
Your questions about window seats in The Hale
Can you make window seats for a home in The Hale?
Yes, we work across Barnet, The Hale included, and across the rest of London. You can fill in our short enquiry form to arrange a design visit.
Do you cover homes near Mill Hill Broadway station?
Yes, homes across Barnet and the rest of London are within the area we cover. You can fill in our short enquiry form to arrange a design visit, and let us know about parking and access at the same time.
Do you work on Saturdays?
Yes, by prior arrangement. Tell us when you contact us if a Saturday suits you best.
Can you fit furniture to uneven walls?
Walls and floors that are not true are part of the job in older homes. We trim the edges to follow the wall and level the base.
What happens at the design visit?
It is a chance to measure properly and talk through what you’d like. We also check the walls and floors and note radiators, sockets and other things in the way, then send a written quote.
Do I choose the paint colour?
You choose it. The paint colour is agreed with you before anything is painted.
Where other trades come in
Our work is the furniture itself: designing it, making it in our workshop and fitting it. That means:
- Repairs to sash windows, cills or shutters
- Plastering and decorating around the seat
- Seat cushions, which you source separately
If in doubt, you can use our contact form and describe the room. Our process from visit to fitting.
Boards, parts and finishes
- Hand-painted finish
- Birch plywood
- Moisture-resistant MDF
- Lift-up lids or drawers
- Radiator grilles
- Spray-painted finish