Example photo by Pete Alexopoulos on Unsplash, not our project
Hounslow · London
Alcove Units in Lampton
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. Our work on alcove units in Lampton starts with a design visit, and everything is built in our workshop.
- Standard units leaving gaps at the sides
- Tired cupboards in the alcoves
- Toys and paperwork with no proper home
Alcove units for your home in Lampton
How we make alcove units for Lampton
We make alcove units from moisture-resistant MDF and birch plywood, each used where it works best. MDF gives smooth doors and panels that take paint well, while birch plywood is strong and holds screws well. The finish is spray painted in the workshop or hand painted on site, in the colour you choose. If you’re living with a desk that tucks into an alcove and clutter with nowhere to go, that is what alcove units are for, made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
A typical 1930s semi has a bay window at the front and a chimney breast with a recess either side. Around Lampton, interwar houses, semis and detached homes make up a big part of the housing, so that layout is worth knowing well. We tend to plan alcove units along the chimney breast wall so the bay keeps its light, though every room is measured first.
The quote names the materials: moisture-resistant MDF and birch plywood, each used where it suits the job. The finish is stated too, whether that’s spray painting or hand painting.
- Place
- Lampton (TW3, TW7, TW5)
- Borough
- Hounslow
- Price
- Quoted for your room
- First step
- Design visit, then a written quote
- Made
- Workshop-made, then fitted
- Made from
- Painted MDF and birch ply
- When we fit
- Weekdays; Saturdays on request
- Enquiries
- The contact form
- Updated
- 27 October 2026
Caring for painted furniture
New paint needs time to cure fully, so treat it gently at first. Beyond that, these tips help:
- Note any vent or air brick on the chimney breast
- Plan any new sockets with your electrician before fitting
- Have any damp looked at before the units are made
- Let us know about stairs, parking and access early
Doors can settle a little once the units are in use. Hinges can usually be adjusted to bring a door back in line, which deals with a door that starts to catch.
Now and then, check handles and hinges are still tight.
Pricing alcove units in Lampton
What it costs comes down to the materials and the time involved. That depends on:
- The overall size of the piece
- Parking near your home
- How many doors and drawers there are
- How square the room is
No two rooms cost the same to furnish, because size, layout and finish change from job to job. A spray finish and a hand-painted finish involve different work, and that shows in the price. The figure comes in your written quote after the design visit.
Helping us understand the room
The more you can tell us at the start, the better the design visit goes. It’s useful to include:
- Your postcode and the borough
- Any ideas or images you have saved
- Rough sizes: width, height and depth
- Pictures showing the full wall, from floor to ceiling
A quote begins with a few details from you: which room it is, rough measurements and a couple of photos if you can take them. When you are ready, message us from the contact page. After that, we arrange a visit to measure and discuss the design, then send a written quote.
Alcove units in Lampton: local notes
The biggest shares of homes in the streets around Lampton were built between 1919 and 1939 (about 31%) and since 2000 (about 27%), on the Valuation Office Agency’s council tax figures for 2025. The age of a home tells us a lot about its walls, floors and ceilings, and so about how alcove units are fixed and fitted. Entries on the National Heritage List near the centre of Lampton include Hounslow Congregational Church (Grade II), about 0.5 miles south, and Osterley Mansions (Grade II), about 0.6 miles east. Works inside a listed home that affect its character, for instance removing original joinery or fixing into it, can need listed building consent from the council. Check with the council’s conservation officer first. Controlled parking zones are common across London, and Hounslow sets its own rules. If parking near you is controlled, a visitor permit or a bay suspension may be needed, and the council arranges suspensions, often with notice. Let us know about parking during the design visit.
If you live in a flat close to Hounslow station, check any building rules on lifts and working hours early, and the sections will be sized for the way in. The wider area includes historic houses such as Osterley House, about 1.1 miles north. If your own home is a period one, the alcoves beside a chimney breast are the natural place for alcove units.
Lampton is within the London Borough of Hounslow, about 1 mile south-east of Hounslow. We design and make alcove units for homes in Lampton. In Hounslow, Lampton is one of the places we cover.
Every home in TW3, TW7 and TW5 is covered for alcove units. If your home is on a street such as York Road, Star Road and Pears Road, or close by, we can arrange a design visit for alcove units. Other places close to Lampton include Hounslow (1 mile south-east), Spring Grove (1 mile north-east), Osterley (1 mile north-east), Woodlands (1 mile south-east) and Heston (1 mile north-west). Elsewhere in Hounslow, we also cover Feltham (3 miles south-west), Brentford (3 miles east), Chiswick (5 miles east), Strand-on-the-Green (4 miles east), Gunnersbury (4 miles east) and Brentford End (2 miles east).
Around Lampton
The streets we cover here include those near Kingsley Academy, Royal Military School of Music and Moon Under Water pub, among other places. For rail, the closest station is Hounslow station, roughly 0.9 miles south. A little further out are Museum of Army Music (1.4 miles south) and Hounslow Hospital (0.8 miles south-west). For a walk, there’s Garden Lake.
More for homes in Lampton
Fitting day, step by step
Before anything is fixed, we set the furniture level. Where the floor slopes, we bring the furniture up to level on adjustable feet or a plinth, which keeps the lines straight. After that, it’s fixed to the wall using fixings that suit the wall, whether that is solid brick, lath and plaster or plasterboard. Clearing the room and the way in beforehand helps the day run well. On the day, we cover the floors first, then bring the sections in. The pieces are levelled, fitted to the walls and fixed back.
- You contact us with a short note about the room and the units you have in mind, and we arrange a design visit at a time that suits you.
- At the design visit, we measure each alcove and go through the layout with you, checking how far the walls are out of square.
- We send a quote in writing for the units, for you to read through at your own pace.
- We make the cupboards and shelves in our workshop, using moisture-resistant MDF and birch plywood.
- We install the units, set them level and scribe them to the alcoves.
Before fitting day
- Get any new sockets or wiring done by your electrician before fitting day
- Take down pictures, mirrors and shelves from the wall
- Mention any parking restrictions on your street
How to get a quote
To get a quote for alcove units in Lampton, message us from the contact page. Let us know the room and the rough idea. We’ll arrange a design visit, then send a written quote.
Related advice
Your questions about alcove units in Lampton
Do you make alcove units for homes in Lampton?
Yes, we work across Hounslow, Lampton included, and across the rest of London. You can send us a few details through our contact form to arrange a design visit.
Can you fit furniture in a home close to Hounslow station?
Yes, homes across Hounslow and the rest of London are within the area we cover. To get started, you can get in touch through our contact form with a few details about the room, and tell us about parking and access at the same time.
Can you build alcove units for alcoves that are not square?
Yes. Few alcoves in older houses are truly square, so each unit is scribed to the wall on site. Adjustable feet or a plinth take care of a floor that slopes.
Is it possible to have a desk built into one alcove?
Yes. One alcove can take a desk with shelves above and a drawer or cupboard beneath. Height and depth are agreed with you, with a route left for cables.
What do you do at the measuring visit?
We measure the room, check how level the walls and floors are and talk through the design with you. We’ll also ask about access and parking, and afterwards we send a quote in writing.
How do I get a quote for alcove units in Lampton?
It is easiest to send us a few details through our contact form and let us know about the room. We then arrange a design visit, measure up and send a quote in writing.
Do you need alcove units in Lampton?
Sometimes there are old units already, worn, badly fitted or the wrong size for how you live. Starting again lets you rethink the layout, from the shelf heights to the doors.
Alcove units can help with:
- Alcoves that aren’t square
- Clutter with nowhere to go
- Furniture that doesn’t fit the alcove
- A desk that tucks into an alcove
If your home is one of the older houses near St Luke, the alcoves beside a chimney breast are the natural place for alcove units.
What to check before you book
- A written quote that sets out the job
- How the furniture will be finished, and where
- Whether the quote follows a visit to your home
- How parking will work on your street
Materials and finishes
Shelves
Shelves can be fixed in place or set on adjustable supports. Fixed shelves help brace the unit, while adjustable ones give you room to change things.
Plinths and scribe strips
In older houses, we usually scribe the sides and often the top too. It is the difference between a unit that sits in the alcove and one that belongs there.