Barnet · London
Fitted cupboards in Edgware, Barnet
We make fitted cupboards for homes in Edgware, designed around the room you have. We design your fitted cupboard at a visit to your home, make it in our workshop and fit it.
- Using the full height of a room
- Hiding meters and a fuse board neatly
- A linen cupboard on the landing
Fitted cupboards designed for your room
Is bespoke worth it?
Many off-the-shelf units use chipboard with a printed surface. We use moisture-resistant MDF and birch plywood, painted in a colour you choose, finished to suit the room. Bays, box rooms and stair bulkheads are where off-the-shelf furniture struggles most, and interwar homes often have all three. Fitted furniture is made around them.
Your quote is written for your room once we’ve visited and measured. A larger piece means more material and more time, so size comes first. Doors, drawers, internal fittings and the finish make up most of the rest.
Why choose us
- Spray painted or hand painted, in the colour you choose
- Built from moisture-resistant MDF and birch plywood
- Built around your room
- Scribed to uneven walls
See our comparison of bespoke and off-the-shelf or what to look for in a quote.
Fitted cupboards in Edgware
Our fitted cupboards are made for homes in Edgware and all over London. It starts with a design visit, where we measure and talk through what you need, and then send you a quote. The cupboards are made at our workshop and fitted in your home. How long fitting takes depends on the number of cupboards and the space they fit into, and your quote sets out the fitting days, so you’ll know before we start. We make fitted cupboards from birch ply and moisture-resistant MDF, painted by hand or sprayed, and the usual reasons to get in touch are cupboards that suit a period house and storage in a corner nothing else fits.
In a family house, the hall and stairs usually carry the most clutter. With interwar houses, semis and detached homes a large part of the housing around Edgware, well-planned storage by the door or under the stairs can take a lot of it. Anything that needs to stay reachable, like meters or a fuse board, is designed around.
The quote names the materials: moisture-resistant MDF, birch plywood or both, depending on the design. It also says how the furniture will be finished: spray painted or hand painted.
- Where
- Edgware (HA8, NW7, HA7)
- Borough
- Barnet
- Price
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Made
- In our workshop, then fitted in your home
- Materials and finish
- Painted MDF and birch ply
- When we fit
- Weekdays; Saturdays on request
- Contact
- Send us a message
- Last updated
- 27 October 2026
Making use of awkward spaces in Edgware
The biggest shares of homes in the neighbourhood around Edgware were built between 1919 and 1939 (about 58%) and since 2000 (about 17%), based on the Valuation Office Agency’s 2025 council tax data. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. Near the centre of Edgware, Historic England’s list includes John Keble Church (Grade II), about 0.5 miles south-east. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, can require listed building consent. Ask the council’s conservation officer before anything is fixed. About 57% of households in the streets around Edgware live in detached or semi-detached houses, going by Census 2021 figures from the ONS. In a semi or detached house, a driveway, where there is one, can make unloading easier.
If you live in a period home close to St Andrew, an old boiler or airing cupboard can be rebuilt with proper shelves. If your children go to Beit Shvidler Primary School or a school nearby, deep drawers suit the bulky things families collect, from scooters to swimming kit. For a flat near Mill Hill Broadway station, the lift, the stair turns and the front door all set the largest piece that can come in.
Edgware is about 4 miles east of Finchley, within the London Borough of Barnet. Wherever you are in Edgware, it works the same way: a design visit, a quote in writing, furniture made at our workshop and fitting in your home. Across Barnet, we cover Edgware and the places around it.
Here we cover the HA8, NW7 and HA7 postcode area for fitted cupboards. Our area takes in homes on streets such as Station Road, Edgware Road High Street and Hillcrest Avenue, for fitted cupboards and any of our other fitted furniture. Main roads around Edgware include the A5100, and we plan where the van can stop before fitting day. We also cover the places around Edgware: The Hale (1 mile east), Broadfields Estate (1 mile north), Burnt Oak (1 mile south-east), Canons Park (1 mile south-west) and Little Stanmore (1 mile south-west). Across the rest of Barnet, our area takes in Finchley (4 miles east), Barnet (4 miles north-east), East Finchley (5 miles south-east), Hendon (3 miles south-east), Whetstone (4 miles east) and Friern Barnet (5 miles east).
What’s near Edgware
We fit furniture in homes around The Northgate School, London Academy and Railway Hotel. For rail, the closest station is Mill Hill Broadway station, roughly 1.1 miles south-east. Other landmarks nearby include Edgware Community Hospital (0.9 miles south) and Broadwalk Centre (0.5 miles south-west). Open spaces near Edgware include Mill Hill Old Railway Nature Reserve.
FAQs: fitted cupboards in Edgware
Is Edgware in the area you cover for fitted cupboards?
Yes, we work across Barnet, Edgware included, and across the rest of London. You can tell us about the room on our contact form to arrange a design visit.
Will parking be an issue for fitting furniture in Edgware?
It depends on the street, as many London boroughs run controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It helps to tell us about parking during the design visit.
Is it possible to build a cupboard around a boiler?
Yes. We design the cupboard to keep the clearances and ventilation set out in the boiler maker’s instructions, with doors that open wide for servicing. Any work on the boiler itself is for a Gas Safe engineer.
Is an outside wall a problem for fitted furniture?
It needs a little planning: leaving ventilation behind and inside helps stop condensation. Damp treatment is not something we do, so any damp needs sorting first.
How long will the cupboards take to fit?
The time the fitting takes depends on the number of cupboards and the space they fit into, and your quote sets out the fitting days. We’ll talk it through at the measuring visit.
Do I need planning permission for fitted furniture?
Not normally. Fitted furniture inside a house does not normally need planning permission, even in a conservation area. Listed buildings can need listed building consent for works that affect their character.
How fitting day works
With the carcasses fixed and level, any doors go on and any drawers or lids are fitted. Each one is adjusted until the gaps are even and it closes cleanly, then checked again. How long the fitting takes depends on the size of the cupboards and the room, and the fitting days are agreed in your quote. Fitting day means carrying in the sections, joining them and fitting them to the walls. Hand-painted furniture can be finished on site; spray-painted pieces arrive finished from the workshop. Saturdays can be arranged.
- You tell us where the cupboards should go and what they need to hold, including anything awkward like a boiler or meter.
- At the design visit we measure up and look at the walls, floor and ceiling. Doors, shelves and rails are agreed then too.
- A quote follows, setting out the design and finish, ready for you to check.
- The cupboards are made and finished in our workshop.
- Fitting day: the cupboards are fitted and trimmed to the room.
Getting ready for fitting day
- Book any lift and let the concierge or building manager know
- Leave a clear route from the front door to the room
- Have your electrician move any sockets or switches beforehand
Arranging a design visit
If you already have something in mind, tell us; if not, we can work it out together at the visit. The design is talked through at the visit, once we have measured, and the written quote that follows sets it out. To start, fill in our short enquiry form.
Advice
Tips worth knowing
None of this takes much effort. Here’s what we suggest:
- Leave room in front of the meters
- Let us know how parking works on your street
- List what you want to store before the design visit
- Make sure walls are dry before we fit
If a hand-painted door gets a knock, it can normally be touched in. A spray finish gives a smooth, even surface that cleans easily with a soft cloth. Keep a note of the paint colour for later.
It helps to list what you want to store before we measure. A coat cupboard and a linen cupboard need quite different insides, and knowing this early saves changes later.
Nearby places to Edgware
Other services in Edgware
When you need someone else
Before you plan the job, it helps to know what we don’t do:
- Wiring for lights or sockets
- Any plumbing in a utility room
- Work on a boiler, which is for an engineer on the Gas Safe Register
If you’re not sure what’s possible in your room, you can use our contact form and we’ll give you a straight answer. Our process from visit to fitting.
Materials and parts
- Birch plywood
- Spray-painted finish
- Hand-painted finish
- Ventilated doors
- Adjustable shelves
- Moisture-resistant MDF
Flats, conversions and leaseholders
In a flat, the route in matters as much as the room. We measure the stairs, landings, lift and doorways not just the room, so each section is sized to get through.
We also make and fit furniture for landlords furnishing a let, often to make the most of a small or tricky room. It is made from the same moisture-resistant MDF and birch plywood as any of our work, finished by spray or by hand.