Example photo by POOJAN THANEKAR on Unsplash, not our project
Ealing · London
Fitted home offices in Pitshanger, Ealing
Planning fitted home offices for a home in Pitshanger? We start with a design visit and a written quote, before anything is made.
- A guest room that is needed for work
- Wires with no tidy route
- A screen that’s hard to read by the window
Fitted home offices designed for your room
How we make fitted home offices for Pitshanger
A fitted home office gives your work a proper place in the house. We design and make built-in desks, shelving and storage for spare rooms, alcoves, landings and the space under the eaves, shaped by the way you work. In Pitshanger, as everywhere we work, it begins with a visit to measure and plan. If your home has an awkward space with no furniture that fits and no way to put work away, home offices made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted can solve it.
Where housing is mixed, as in much of London, home offices end up in all sorts of rooms: a box room, a bedroom wall, a recess or even a landing. The design is made for the space you have, painted in a colour agreed with you.
The written quote is your record of the job. It describes the home office we have designed for the room, what it is made from and how it is finished, and it is what the workshop builds to.
- Place
- Pitshanger (W5, W13, UB6)
- Area
- Ealing
- Price
- Quoted for your room
- To begin
- A design visit: we measure and talk it through
- Where it is made
- Made in our workshop and fitted on site
- Made from
- MDF and plywood, painted to order
- When we fit
- Weekdays (Saturdays if arranged)
- Enquiries
- Send us a message
- Page updated
- 27 October 2026
Questions from Pitshanger
My home in Pitshanger is a flat. How do you get the furniture in?
We measure the route in as well as the room: the stairs, landings, lift and doors. The furniture is made in sections that fit the stairs and lift, and put together in the room. If your building has rules on lift booking or working hours, or your lease needs consent for alterations, it’s worth checking those early.
Do I need permission for fitted furniture in a conservation area?
Not normally. Conservation area controls are mostly concerned with the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, internal works that affect its character can require listed building consent, so check with the council first. If you are unsure, the council can confirm.
Which materials go into your home offices?
We use moisture-resistant MDF and birch plywood. Birch plywood gives strength to the desk, shelves and drawers, while the doors and panels are MDF, which paints well. The finish is spray-painted or hand-painted.
Can a home office double as a guest room?
It varies with the size of the room. An office on one wall often leaves room for a bed. We’ll look at the options during the design visit.
Can you fit furniture on an external wall?
An outside wall can be colder and damper than an inside one, so we allow for ventilation behind and inside the furniture, which helps avoid condensation and mould. If there’s damp, it should be sorted before anything is fitted.
Should I send pictures?
Yes, they help. Pictures of the whole wall or room, including the floor and ceiling, give us a good idea of the space. You can send them when you fill in our short enquiry form.
What fitted home offices cannot fix
Some parts of a job need another trade, such as an electrician, a plumber or an engineer on the Gas Safe Register. Here’s what to know:
- Electrical work for the office, which your electrician carries out
- Converting a loft to make room for an office
- Setting up computers, screens or networks
If in doubt, you can use our contact form and describe the room. How it works.
What it is made from
- Filing drawers
- Spray-painted finish
- Hand-painted finish
- Built-in desks
- Cable routes
- Moisture-resistant MDF
- Birch plywood
Places near Pitshanger
More for homes in Pitshanger
Fitted home offices for homes in Pitshanger
About 43% of the homes in the streets around Pitshanger went up before 1919, and about 18% between 1919 and 1939, according to Valuation Office Agency council tax figures (2025). It’s a good starting point, though every room is still measured, as two homes of the same age rarely match. Near the centre of Pitshanger, Historic England’s list includes Church of St Mary the Virgin (Grade I), about 0.6 miles north-west, and Church of St Peter (Grade II*), about 0.5 miles south-east. Where a home is listed, listed building consent can be needed for inside works that affect its character, such as fixing into original panelling. The council’s conservation officer is the person to ask before work starts. Around Pitshanger, about 43% of homes date from before 1919, well above the figure for Ealing as a whole, about 28%, according to Valuation Office Agency council tax figures (2025). So older-house details are more likely to come into the design of home offices.
If you live near Castle Bar Park, a desk facing a window makes the most of the daylight. For a family home near North Ealing Primary School, a desk long enough for two can serve a laptop and a homework book side by side.
Pitshanger is about 1 mile south of Ealing, in the London Borough of Ealing. Anywhere in Pitshanger, the process is the same: we visit and measure, send a quote in writing, make the furniture in our workshop and fit it. In Ealing, Pitshanger is one of the places we cover.
In W5, W13 and UB6, the process is the same as anywhere else in London. You’ll find streets here such as Selby Road, Argyle Road and Kent Avenue, and we cover homes on all of them for fitted home offices. If you are just outside Pitshanger, we also cover Brentham Garden Suburb (1 mile east), Perivale (1 mile north), Ealing (1 mile south), Hanwell (2 miles south-west) and West Ealing (2 miles south-west). Elsewhere in Ealing, we also cover Acton (2 miles south-east), Southall (3 miles south-west), Northolt (3 miles north-west), Acton Green (3 miles south-east), Bedford Park (3 miles south-east) and Northfields (2 miles south).
What’s near Pitshanger
Around Pitshanger, we cover homes near St Benedict's School, Brentham Clubhouse pub and Ealing Independent College, among other places. For rail, the closest station is Castle Bar Park station, about 0.8 miles west of the centre. Well-known places in the area include London Transport Museum Depot (2 miles south-east) and Ealing Hospital (1.9 miles south-west). Green spaces nearby include Fox Wood and Castlebar Hill.
Caring for painted furniture
Fitted furniture is part of the room, so it is worth looking after. Here are a few tips worth knowing:
- Think about where the sockets are now
- Mention any parking rules on your street
- Measure your chair and how much room you need behind it
- Think about what will sit on the shelves
Small marks on a hand-painted finish can be touched in. It’s worth keeping a record of the paint colour. Should you have a question about the office, fill in our short enquiry form and we’ll help.
Keep heavy loads on the shelves meant for them. Shelves are made for the load you planned. Keep the weight spread along the shelf.
Is it time for fitted home offices?
Cables and chargers are a common frustration. A desk designed with cable routes keeps them tidy. Any new sockets are for your electrician, and we design around them.
We are often asked to help with:
- Glare from a window on the screen
- No way to put work away
- Files and folders piling up
- An alcove or landing that could take a desk
The wider area includes historic houses like Pitzhanger Manor, about 1.1 miles south. If your own home is a period one, a small back bedroom can become a home office with a desk under the window.
Before you hire any carpenter
- Real projects you can actually look at
- Whether the quote follows a visit to your home
- Which parts of the job need an electrician or a plumber
- How they deal with uneven walls and floors
Flats, conversions and leaseholders
If you live in a flat, getting the furniture in is planned from the start. At the design visit, we measure the stairs, the landings, any lift and the doors, so each section is sized to get through without a struggle.
Blocks of flats often have their own rules on lift bookings, entry systems and times for trades. Let us know about them at the measuring visit, so fitting day is planned around them.
From workshop to your room
The last stage of the day is the finish. With a spray finish from the workshop, there’s typically only filling and touching up to do in the room; if you chose hand painting, that can be done in the room once the furniture is fitted. Either way, the finish is the one set out in your quote. Fitting day means joining the sections, fitting them to the walls and setting them level. The fixings suit whatever the walls are made of. Saturdays can be arranged.
- You tell us how you work and where you’d like the office.
- We measure the room, look at the light and note the sockets. Cable routes are planned at this point.
- The design is agreed and a written quote follows, with the finish set out.
- The office is made at our workshop and painted in your colour. The materials are moisture-resistant MDF and birch plywood.
- The office is fitted, scribed to the walls and checked with you.
Preparing the room
- Let us know if your street is in a controlled parking zone
- Have your electrician move any sockets or switches beforehand
- Empty the space we will be working in
Arranging a design visit
The design visit is where every quote starts. We take full measurements, see how true the walls and floors are and work through the design together. Afterwards, we send a quote in writing for you to look over. To book one, get in touch through our contact form.