Example photo by Kirsten Miles on Unsplash, not our project
City of London · London
Loft Storage in Bishopsgate
Few London rooms are perfectly square, and we scribe the furniture to follow the walls. Our work on loft storage in Bishopsgate starts with a design visit, and everything is made in our workshop.
- Wasted space behind the knee walls
- An empty dormer that could hold shelves
- A sloping ceiling with no room for a wardrobe
Loft storage designed for your room
FAQs: loft storage in Bishopsgate
Can you fit furniture in a home close to London Liverpool Street station?
Yes, homes across the City of London and the rest of London are within the area we cover. You can drop us a line using the contact form to arrange a design visit.
Is parking a problem for fitting in Bishopsgate?
It can be: much of inner London is covered by controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It’s useful to tell us about parking during the design visit. The whole City of London is also inside the Congestion Charge zone, and the ULEZ covers every London borough.
What happens when you come to measure?
We measure the room, check how level the walls and floors are and go through the design with you. Access and parking are worth talking about too.
Does fitted furniture need planning permission?
Not usually. Conservation area controls are largely about how buildings look from outside, and furniture inside a house doesn’t normally need it. In a listed building, check with the council’s conservation officer before any work.
How is the furniture painted?
You can choose between two finishes: spray painted or hand painted. A spray finish is smooth and even, while a hand-painted one is easy to touch up later.
Is an outside wall a problem for fitted furniture?
An outside wall can be colder and damper than an inside one, so ventilation behind and inside the furniture helps, which helps avoid condensation and mould. Any damp needs sorting by the right specialist before fitting.
Loft storage for homes in Bishopsgate
We make each eaves cupboard in our workshop from moisture-resistant MDF and birch plywood. Birch plywood gives the carcasses and drawers their strength, and MDF gives the doors and panels a smooth surface for paint. Once painted, by spray or by hand, it’s carried up and fitted in your home in Bishopsgate. If you’re living with standard furniture that won’t go up the loft stairs and boxes and suitcases with no home, eaves cupboards made from birch ply and moisture-resistant MDF, painted by hand or sprayed can solve it.
Floors in newer homes are often finished and easy to mark, so they’re protected while storage is fitted. Around Bishopsgate, many homes date from 2000 onwards, and their plasterboard walls need fixings into the studs or made for the board. Skirting can be scribed around, or the storage can sit on its own plinth.
Once you have read the quote and decided to go ahead, the furniture is made in our workshop. It describes the design, the materials and the finish agreed at the visit, so you can check every detail beforehand.
- Where
- Bishopsgate (E1, EC2A, EC1Y)
- Area
- City of London
- Prices
- Quoted for your room
- First step
- A design visit: we measure and talk it through
- Made
- Workshop-made, then fitted
- Materials and finish
- MDF and birch plywood, painted
- Working days
- Monday to Friday; Saturdays by prior arrangement
- Enquiries
- Send us a message
- Updated
- 27 October 2026
What prompts loft storage in Bishopsgate
Most people get in touch because the eaves are going to waste. Behind the knee walls, there is space nobody can reach. Built-in storage makes that space useful.
Here’s what loft storage can help with:
- Low eaves that nobody can use
- Needing storage in a loft office
- Furniture that cannot get up to the loft
- A new loft conversion that needs storage
If you live near Finsbury Circus, eaves cupboards can be designed to hold outdoor kit, from walking boots to picnic things.
What to check before you book
- How they’ll get the furniture into the room
- How they deal with uneven walls and floors
- Which parts of the job need an electrician or a plumber
- Are the boards named, like MDF or plywood?
Loft storage in Bishopsgate: local notes
Homes built since 2000 make up about 41% of the housing in the neighbourhood around Bishopsgate, with about 22% built before 1919, according to Valuation Office Agency council tax figures (2025). Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. The centre of Bishopsgate is within about a quarter of a mile of the Bishopsgate Conservation Area. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house doesn’t normally need permission. If you are unsure, check with the council before work starts. More than a third of the homes in the streets around Bishopsgate (about 41%) were built since 2000, according to Valuation Office Agency council tax figures (2025). Where a newer house has had its loft converted, the eaves and slopes can take fitted storage; we build once the loft is converted or boarded.
For a flat near London Liverpool Street station, it helps to book the lift and tell the concierge before fitting day. Mansion House, about 0.4 miles south-west, is one of the historic houses in the wider area. For a period home anywhere nearby, the low eaves and slopes of a converted loft are worth using.
Bishopsgate is about 1 mile west of City of London, in the City of London. We design and make loft storage for homes in Bishopsgate and across the City of London. Bishopsgate is one of the places in the City of London where we make loft storage, and the borough has 8 places on our list.
Postcode districts we cover here for loft storage: E1, EC2A and EC1Y. Whether you live on a street like Bush Lane, Swan Lane and Love Lane or on one nearby, we can visit to measure up for loft storage. Main roads around Bishopsgate include the A3 and A10. If your home is on one of them, tell us during the design visit, as some main roads have strict stopping rules. If you are just outside Bishopsgate, we also cover Aldgate (1 mile south-east), Spitalfields (1 mile east), City of London (1 mile west), Tower Hill (1 mile south) and Whitechapel (1 mile east).
Around Bishopsgate
We fit furniture in homes around The Aldgate School, St Mary-at-Hill and Bishopsgate Institute Special Collections and Archives, among other places. There is a railway station in Bishopsgate itself: London Liverpool Street station. A little further out are Gabriel's Wharf (1.2 miles south-west) and London Bridge Hospital (0.7 miles south). Green spaces nearby include Tower Hill.
Also near Bishopsgate
What else we make in Bishopsgate
What affects the price in Bishopsgate
To work out the quote, we look at:
- Tricky walls, sloping ceilings and uneven floors
- How easy it is to get the furniture into the room
- Hanging rails, shelves, drawers and other fittings inside
- Parking and unloading on your street
Parking is part of the price picture in London. The boroughs run controlled parking zones across much of the city, so we may need a visitor permit, a paid bay or a suspended bay. Tell us about parking during the design visit, so we can plan for it.
What we need to know
When you contact us, these help most:
- What you’d like to store or use the space for
- Whether it’s a house or a flat, and if there are stairs or a lift
- Pictures of styles you like, if you have any
- Pictures showing the full wall, from floor to ceiling
A quote begins with a few details from you: the room, rough measurements and some photos if you have them. To send them, get in touch through our contact form. After that, we arrange a visit to measure and discuss the design, then send a quote in writing.
DIY, flat-pack or bespoke
Where bespoke earns its keep is in rooms that aren’t square. Older London rooms tend to have leaning walls, sloping floors and alcoves of different widths, which leaves standard units with gaps at the sides and top.
It’s worth being honest about cost: off-the-shelf furniture typically costs less up front. Bespoke earns its place where the room is awkward, space is tight or you want the furniture to look part of the house.
Looking after your furniture
A little care keeps the finish looking good, whether it was spray painted or hand painted. These practical tips help:
- Look at the insulation and any vents behind the knee wall
- Let us know about parking near your home
- Clear the knee-wall spaces before the design visit if you can
- Plan where the tall end of a wardrobe can go
A hand-painted finish is easy to touch up if it gets marked. It is worth keeping a record of the paint colour. Should you have a question about the storage, fill in our short enquiry form and we will help.
Temperatures in a loft room can swing more than elsewhere. A little ventilation helps. That keeps the storage and the paint in good order.
How fitting day works
There isn’t much for you to do on fitting day. Someone needs to let us in, and the room should already be cleared, as agreed at the design visit. After that, it is over to us: the floors are covered, the sections come in and the fitting begins. How long fitting takes depends on how much storage you want in the loft, and we confirm the fitting days in your quote. Walls in newer homes are often plasterboard on studs, so fixings go into the studs or use fixings made for the board. Floors are covered while we work, and dust is kept to a minimum.
- It starts when you get in touch about storage in your loft, whether it’s a converted room or a boarded space.
- We visit to measure and look at what’s behind the knee walls.
- Your quote sets out the design, the materials and the finish.
- We make the cupboards and drawers in our workshop, cut to the slope, from moisture-resistant MDF and birch plywood.
- The storage is fitted and set level, ready to fill, with the doors and drawers checked with you.
Before fitting day
- Check the building’s rules for trades and lift bookings
- Take anything hanging off the wall we’re fitting to
- Make sure pets are kept safely away
Arranging a design visit
To make a start, use our contact form and tell us which room you have in mind and roughly what you’d like. We then arrange a design visit to measure and discuss the design, and a written quote follows.