Bespoke fitted furniture across all 32 London boroughs and the City

Example photo by Kirsten Miles on Unsplash, not our project

Harrow · London

Loft storage in Rayners Lane, Harrow

Planning loft storage for a home in Rayners Lane? It starts with a design visit to measure and talk through ideas, then a quote in writing.

  • No wardrobe that fits under the slope
  • A boarded loft with no proper shelving
  • Low eaves that nobody can use

Need loft storage in Rayners Lane?

What prompts loft storage in Rayners Lane

A dormer can feel like wasted space. Shelves, a desk or a seat in the dormer make it useful. It adds storage without crowding the room.

Loft storage can help with:

  • An empty dormer that could hold shelves
  • No wardrobe that fits under the slope
  • A converted loft with no fitted furniture
  • Low eaves that nobody can use

If your home is as old as some of the listed buildings nearby, like Ace Cinema, original features like shutters, panelling and fireplaces are worth designing around. If your own home is listed, check with the council before fixing into original features.

What to check before you book

  • Have they measured the stairs, lift and doorways?
  • Are the boards named, like MDF or plywood?
  • Real projects you can actually look at
  • Whether you will get a written quote, not just a figure

Choosing a carpenter in London: a checklist

Loft storage in Rayners Lane

A converted loft often has more storage space than it first seems. We design and make eaves cupboards, drawers in the knee walls, wardrobes under the slopes and shelves in dormers, each shaped to the room. In Rayners Lane, as everywhere we work, it begins with a visit to measure and plan. People typically come to us about seasonal things cluttering the loft room and an empty dormer that could hold shelves, and the answer is made in our workshop from moisture-resistant MDF and strong birch plywood, with a painted finish.

An interwar house tends to have truer walls than a Victorian one, though rarely square corners. Much of the housing around Rayners Lane is interwar, semi-detached or detached, and every piece is still scribed where it meets the wall. Lids, doors and drawers are set level on site so they run true.

Materials are named in the quote: moisture-resistant MDF and birch plywood, each used where it suits the job. The finish is stated too, whether that’s spray painting or hand painting.

Illustration of a fitted wardrobe following a sloping loft ceiling
Where
Rayners Lane (HA2, HA5, HA4)
Area
Harrow
Cost
Quoted for your room
To begin
Design visit, then a quote in writing
Where it’s made
Workshop-made, then fitted
Made from
Painted MDF and birch ply
Working days
Monday to Friday; Saturdays by arrangement
Get in touch
Send us a message
Last updated
27 October 2026

Could you do it yourself?

What you pay for with bespoke is mainly the fit: edges scribed to the wall, a level base on a sloping floor and a neat line where the furniture meets the ceiling. In an older room, standard units rarely manage that.

It is worth being honest about cost: off-the-shelf furniture normally costs less up front. Bespoke makes more sense where the room is tricky, the space is valuable or you want the furniture to look built in.

Common questions about loft storage

Can you make loft storage for a home in Rayners Lane?

Yes. Rayners Lane is one of the places we work, along with the rest of Harrow and London. You can tell us about the room on our contact form to arrange a design visit.

Do I need permission for fitted furniture in a conservation area?

Not normally. Conservation area controls are largely about how buildings look from outside, so fitted furniture inside a house does not normally need planning permission. If your home is listed, internal works that affect its character can require listed building consent, so check with the council first. If you’re unsure, the council can confirm.

Do I need to be in when you fit?

We need someone to let us in at the start of the day. It is good to have someone there at the end to look over the work with us.

How long is the fitting for eaves storage?

How long the fitting takes depends on the length of the eaves and the design, and the fitting days are agreed in your quote. The storage is made at our workshop first, so the time in your home is spent fitting. We keep the route up to the loft as clear as possible.

Can you fit furniture to uneven walls?

That is normal in older homes, and it’s what scribing is for. We scribe the edges to follow the wall and set the furniture level on adjustable feet or a plinth.

Will eaves storage block the ventilation?

It shouldn’t, if it is designed properly. We design eaves storage so it doesn’t block ventilation or squash insulation. For worries about existing insulation or vents, ask the people who did the conversion.

Loft storage in Rayners Lane: local notes

About 71% of the homes in the area around Rayners Lane went up between 1919 and 1939, and about 16% since 2000, in the VOA’s 2025 council tax stock figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Rayners Lane is partly covered by a conservation area, going by Historic England’s data. Fitted furniture inside a house doesn’t normally need planning permission in a conservation area, as the controls are mainly about the outside of buildings. If you want to be certain, ask the council’s planning team. More than half of the homes in the neighbourhood around Rayners Lane (about 71%) date from between 1919 and 1939, in the VOA’s 2025 council tax stock figures. Many interwar houses have had their lofts converted, leaving sloping ceilings and eaves to use.

Close to Eastcote House Gardens? Eaves cupboards can be designed to hold outdoor kit, from walking boots to picnic things. For an older house near St. Andrew’s Church, eaves cupboards in a converted loft are scribed to slopes that are rarely even.

Rayners Lane is part of the London Borough of Harrow, about 1 mile east of Harrow. We design and make loft storage for homes in Rayners Lane and the rest of Harrow. Across Harrow, we cover Rayners Lane.

We work across the HA2, HA5 and HA4 postcode area for loft storage. Whether you live on a street such as Kings Road, The Avenue and Torbay Road or on one nearby, we can visit to measure up for loft storage. We also cover the places around Rayners Lane: Roxbourne (1 mile west), North Harrow (1 mile north-east), Harrow (1 mile east), Eastcote (1 mile north-west) and South Harrow (1 mile south-east). Across the rest of Harrow, our area takes in Stanmore (4 miles north-east), Hatch End (2 miles north), Harrow Weald (3 miles north-east), Wealdstone (2 miles north-east), Little Stanmore (4 miles north-east) and Greenhill (2 miles north-east).

Around Rayners Lane

The streets we cover here include those near Rayners pub, Pinner High School and Heathfield School, among other places. For rail, the closest station is Northolt Park station, roughly 1.2 miles south-east. Nearby you will also find Clementine Churchill Hospital (1.9 miles east) and Heath Robinson Museum (1.4 miles north-west).

Map of Rayners Lane © OpenStreetMap contributors

Bespoke loft storage or ready-made?

Ready-made furniture has to come up the loft stairs in one piece or flat-packed. Our storage is made in sections sized for the route. That makes it possible to fit large pieces in a small loft. Ready-made units come in standard depths that rarely suit every space, so they can stick out too far or waste space behind. Fitted furniture is made to the depth the space can take.

No two rooms cost the same to furnish, because the size, the layout and the finish all vary. Spray painting and hand painting are different processes, which affects the cost. You will see the figure in your written quote, after the design visit.

What you get with us

  • A design visit, then a quote in writing
  • Designed for the room you have
  • Built in our workshop and fitted in your home
  • Fitted tight to walls that are not straight

Read how bespoke compares with ready-made or how to compare quotes.

Looking after your furniture

These points come up often when people plan loft storage. They help before and after fitting:

  • Note the things that need a home in the loft
  • Think about how you will reach into the eaves
  • Think about matching the woodwork or the walls
  • Note how narrow the loft stairs are

Wiping the fronts with a soft, damp cloth is normally all they need. Dry them afterwards, and avoid abrasive pads and strong solvents. Handles and drawer edges pick up marks first.

Keep the eaves ventilated and avoid pressing things against the back of the space. Insulation pressed flat does not do its job. If you notice damp or condensation behind the eaves, ask whoever converted the loft.

From workshop to your room

Before anything is fixed, we set the furniture level. Where the floor slopes, we bring the furniture up to level on adjustable feet or a plinth, and that keeps the doors and shelves true. After that, it’s fixed to the wall using fixings that suit the wall, whether that’s solid brick, lath and plaster or plasterboard. On fitting day, the sections are carried in, assembled, scribed to the wall and levelled. Spray-painted pieces come finished from the workshop, while hand painting can happen on site. Saturdays can be arranged.

  1. First we hear about the loft room and what you’d like to store.
  2. At the design visit, the room and the route up are measured.
  3. The design is agreed and a written quote follows, with the finish set out.
  4. The storage is made at our workshop, in sections sized for the stairs. It is made from moisture-resistant MDF and birch plywood.
  5. We carry it up, fit it and check every door and drawer with you. Any hand painting is done in the loft.

Preparing the room

  • Empty the space we’ll be working in
  • Clear the hallway and stairs so the sections can come through
  • Clear the walls of pictures and shelves

Arranging a design visit

Pictures help us understand the room before we visit. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space, especially with rough sizes. To send them over, send us a few details through our contact form, and we’ll suggest a time for a design visit.

Arrange a design visit

Related advice

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City