Example photo by Kirsten Miles on Unsplash, not our project
Harrow · London
Stanmore Loft Storage
In Stanmore, we design loft storage around the room you actually have. We design your eaves cupboard at a visit to your home, make it in our workshop and fit it.
- Nowhere to store bags and boxes
- Unused space in a dormer
- Ready-made wardrobes too big for the stairs
Loft storage designed for your room
The problems loft storage solve
The most common reason is wasted space. The low spaces at the edge of a loft room are hard to use. Cupboards and drawers built into the knee wall put it to work.
Here are some of the needs we are asked about most:
- A dormer that is not being used
- Needing storage in a loft office
- Furniture that cannot get up to the loft
- A boarded loft with no proper shelving
Living in a block of flats near Harrow & Wealdstone station? Then the lift, the stair turns and the front door all set the largest piece that can come in.
Before you hire any carpenter
- How they’ll get the furniture into the room
- Will the quote be in writing?
- How parking will work on your street
- Whether they can show you real projects they’ve done
How we make loft storage for Stanmore
Our work is in loft rooms that are already converted, or lofts that are boarded. The conversion itself isn’t our work, and conversions come under Building Regulations. Once the room is finished, we can design storage to suit it. In Stanmore, it all begins with a design visit. If your home has no wardrobe that fits under the slope and boxes piled on loft boards, that’s what eaves cupboards are for, made from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish.
In a family house, the hall and stairs usually carry the most clutter. Around Stanmore, where interwar homes, semis and detached houses make up a big part of the housing, fitted storage near the front door can take much of it. Anything that needs to stay reachable, like meters or a fuse board, is designed around.
After the design visit, we send you a quote in writing. It describes the design we discussed, the materials and the finish, so you know exactly what you’re getting.
- Place
- Stanmore (HA7, HA8, HA3)
- Borough
- Harrow
- Cost
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Where it’s made
- Workshop-made, then fitted
- Materials and finish
- MDF and birch plywood, painted
- Fitting days
- Monday to Friday; Saturdays by prior arrangement
- Contact
- Our contact form
- Last updated
- 27 October 2026
Honest limits
It helps to know what’s outside our work before you plan:
- New sockets, lights or wiring, which are for your electrician
- Any work on the structure of the house
- Anything that needs Building Regulations sign-off
If in doubt, you can send us a few details through our contact form and describe the room. How a job runs, step by step.
What goes into it
- Moisture-resistant MDF
- Birch plywood
- Sloped wardrobe tops
- Hand-painted finish
- Spray-painted finish
- Eaves doors and drawers
Your questions about loft storage in Stanmore
Is Stanmore in the area you cover for loft storage?
Yes, Stanmore is within the area we cover, which takes in all of Harrow and the rest of London. We start with a design visit to measure the room and talk through what you need, and then we send a quote.
Is parking a problem for fitting in Stanmore?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you at the measuring visit.
What do eaves cupboards cost?
Because every job is different, the cost is set out in a written quote after the visit. Drawers in the knee wall typically involve more work than simple cupboards, and the finish matters too. Everything is set out in a written quote after the visit.
What if the wall is cold or damp?
It can be done with some care: ventilation behind and inside the furniture helps avoid condensation and mould. We do not treat damp, so any damp should be sorted before fitting day.
Do I get to choose the colour?
You do. The paint colour is agreed with you, and it’s set out in the quote.
Can you add sockets inside the units?
No. Sockets, switches and lighting are for your electrician. We plan the furniture around where they’ll go.
Flats, blocks and rented homes
Leaseholders should check the lease before anything is fixed to the walls. A lease can require consent from the building owner for alterations, which is worth sorting early. We cannot give advice on leases, so check it yourself or ask your managing agent.
For a rented home, access for the design visit and fitting day has to be agreed with the tenants. A letting agent can arrange this on a landlord’s behalf.
Making use of tricky spaces in Stanmore
About 43% of the homes in the area around Stanmore went up between 1919 and 1939, and about 25% between 1945 and 1972, going by the Valuation Office Agency’s 2025 council tax figures. That matters for eaves cupboards, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. Near the centre of Stanmore, Historic England’s list includes Church of St John (Grade II*), about 0.6 miles north-west, and Church of St William of York (Grade II), less than half a mile north. If you live in a listed building, fixing into or taking out original features like panelling may need listed building consent. It’s worth speaking to the council’s conservation officer before the design is final. More than a third of the homes in the neighbourhood around Stanmore (about 43%) date from between 1919 and 1939, going by the Valuation Office Agency’s 2025 council tax figures. Many interwar houses have had their lofts converted, leaving sloping ceilings and eaves to use.
Headstone Manor, about 2.5 miles south-west, is one of the historic houses in the wider area. If your own home is a period one, the low eaves and slopes of a converted loft are worth using. For families living near Whitchurch Primary School & Nursery, a place for each person’s coat and shoes stops the hallway filling up.
Stanmore is about 3 miles south-west of Harrow, within the London Borough of Harrow. Anywhere in Stanmore, it works the same way: a design visit, a written quote, furniture made in our workshop and fitting in your home. In Harrow, Stanmore is one of the places we cover, and the borough has 20 places on our list.
Postcode districts we cover here for loft storage: HA7, HA8 and HA3. We cover homes on streets like Church Road, London Road and Edgware Road High Street, whether you want loft storage or another piece made for the room. Stanmore is near the A410 and B461; on busy main roads, unloading eaves cupboards takes a little planning. Close by, we also work in Belmont (1 mile south-west), Brockley Hill (1 mile north), Harrow Weald (2 miles west), Headstone (3 miles west) and Hatch End (3 miles west). We also make loft storage in nearby places like Harrow (3 miles south-west), Wealdstone (2 miles south-west), Greenhill (2 miles south-west), South Harrow (4 miles south-west), Roxeth (4 miles south-west) and Pinner Green (4 miles west). Stanmore is one of the larger places we cover in Harrow.
Around Stanmore
We fit furniture in homes around Avanti House School, Sahara Lounge pub and Whitchurch Junior School and the streets around them. For rail, the closest station is Harrow & Wealdstone station, about 1.9 miles south-west. Well-known places in the area include Royal National Orthopaedic Hospital (1.4 miles north) and Cat Museum (1.7 miles south-west). Green spaces nearby include Stanmore Country Park.
How it’s made
Hand-painted finish
A hand-painted finish can be done in your home after fitting. It’s easy to touch up if it gets marked. That helps in a well-used bedroom.
Pull-out drawers
A run of drawers along the knee wall can work like a long chest. The top can act as a shelf. We agree the layout at the measuring visit.
How fitting works for loft storage
When we arrive on fitting day, we start by protecting your floors and the route from the front door to the room. Next, we carry in the sections made in our workshop. How long fitting takes depends on the length of the eaves and the design, and we confirm the fitting days in your quote. Some interwar and suburban streets have driveways, which can make unloading easier, so it’s worth mentioning at the design visit. Otherwise, details of permits or nearby bays help. Doorways, stairs and floors are covered on the way in.
- You get in touch with a few details about the loft room.
- At the design visit, we look at the slopes, the eaves and the way up, and discuss the design with you.
- A quote in writing follows, with the fitting days agreed.
- We make the cupboards and drawers in our workshop, cut to the slope, from moisture-resistant MDF and birch plywood.
- The storage is fitted and set level, ready to fill.
Getting ready for fitting day
- Tell us about parking near your home
- Book any lift and let the concierge or building manager know
- Let us know where the boiler and meters are
Getting a quote
Rough sizes are fine at the start. We measure everything properly at the measuring visit, including how level the floor and ceiling are. To get started, send us a few details through our contact form with some details about the room. You receive a written quote after the visit.