Example photo by Franco Debartolo on Unsplash, not our project
Brent · London
TV and media units in Queen's Park, Brent
Built-in TV walls and media cabinets, for homes in Queen's Park. Every piece is made at our workshop and fitted in your home, with a spray or hand-painted finish.
- Games, controllers and remotes everywhere
- A cabinet that traps heat
- Empty alcoves beside the TV
Need TV and media units in Queen's Park?
How we make TV and media units for Queen's Park
Speakers need space to be heard properly. A soundbar can sit on a shelf below the screen, and larger speakers can go on open shelves either side. Closing speakers in a cupboard muffles them. If you’re living with a TV stand that doesn’t fit the wall and somewhere to keep games tidy, TV and media units made from moisture-resistant MDF and birch plywood, finished by spray or by hand can solve it.
Around Queen's Park, a large share of homes date from before 1919, which in London mostly means Victorian and Edwardian houses. Main rooms in houses like these normally have a chimney breast with an alcove on each side, and those alcoves are the natural home for TV and media units. Because old walls bow and floors slope, the units are scribed to follow the wall and levelled at the base.
The furniture is made in our workshop after you’ve had the quote and decided to go ahead. It describes the design, the materials and the finish agreed at the visit, so you can check every detail beforehand.
- Location
- Queen's Park (NW6, W9, W10)
- Borough
- Brent
- Price
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Made
- In our workshop, then fitted in your home
- Made from
- Painted MDF and birch ply
- When we fit
- Weekdays (Saturdays if arranged)
- Get in touch
- Send us a message
- Last updated
- 27 October 2026
Where other trades come in
We are carpenters, so some jobs belong to other trades. These are worth knowing before you plan:
- Taking out a fireplace or chimney breast
- Plastering or decorating around the unit
- Setting up and tuning the TV, boxes and speakers
If you are not sure what’s possible in your room, you can get in touch through our contact form and we will give you a straight answer before you arrange a visit. How a job runs, step by step.
Materials and parts
- Cable routes
- Moisture-resistant MDF
- Birch plywood
- Spray-painted finish
- Hand-painted finish
- Ventilated cabinets
Before and after fitting day
The finish lasts best with a little care, whether it was spray painted or hand painted. Here are our suggestions:
- Choose how the TV will sit before the design is finished
- Count your equipment, including routers and consoles
- Let us know about access early
- Plan any new sockets with your electrician before fitting
When you change equipment, use the cable routes we planned instead of making new ones. It keeps the unit tidy.
Ask your electrician about new sockets rather than running extension leads through the unit.
Flats, conversions and leaseholders
Blocks of flats often have their own rules on lift bookings, entry systems and times for trades. Let us know about them at the design visit, and we’ll plan the fitting around them.
In a managed block, the building manager or concierge may need notice before we arrive. If there’s a lift, it may need booking, and its size matters when we plan the sections. Let us know about it when you get in touch.
Questions from Queen's Park
My home in Queen's Park is a period house with walls that are not straight. Is that a problem?
Yes, that is normal in older houses: each piece is scribed to the wall and levelled at the base. Skirting, picture rails and cornices are met neatly or cut around. Fixings are chosen for the wall, whether solid brick or lath and plaster.
I live in a flat in Queen's Park. How will the furniture get up the stairs?
At the design visit, we measure the way in along with the room itself. TV and media units are made in our workshop in sections sized to fit that route, then assembled in your flat. It is useful to check any building rules and your lease before fitting day.
Will the cables be hidden?
That is the aim, and it’s planned from the start. Routes, openings and removable panels let you add or change leads later without taking the unit apart. If the TV is wall-mounted, we plan a route behind the screen.
Who chooses the colour?
You choose it. We agree the colour with you, and it is set out in the quote.
What do you do at the measuring visit?
We take full measurements, look at the walls and floors and work through the design together. Access and parking are worth talking about too, and afterwards we send a written quote.
Can you come on a Saturday?
Yes, by arrangement. Tell us when you contact us if a Saturday suits you best.
Materials and finishes
Birch plywood
Birch plywood is strong and holds screws well, which suits shelves for heavy speakers and amplifiers.
Hand-painted finish
A hand-painted finish can be done on site once the unit is fitted. Small marks are simple to touch up.
Living-room carpentry in Queen's Park: local notes
In the neighbourhood around Queen's Park, the largest groups of homes date from before 1919 (about 63%) and between 1973 and 1999 (about 13%), in the VOA’s 2025 council tax stock figures. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Queen's Park is partly covered by a conservation area, going by Historic England’s data. Conservation area rules mainly cover the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. If in doubt, the council’s planning team can confirm. Purpose-built flats are home to about 52% of households in the streets around Queen's Park, in the ONS Census 2021 figures. For a flat, TV and media units are made in sections sized for the stairs, the lift and the doors. Building management rules on lifts, deliveries and working hours are worth checking early.
Near listed buildings like Church of St Augustine, about 0.5 miles east of the centre of Queen's Park, older homes may keep original joinery that TV and media units can be designed around. For a listed home, fixing into original features can need listed building consent. If you live in a flat close to Queens Park (London) station, the lift, the stair turns and the front door all set the largest piece that can come in. Winfield House, about 1.7 miles east, is one of the historic houses in the wider area. For a period home anywhere nearby, walls that bow and floors that slope are why TV and media units are scribed to fit rather than pushed into place.
Queen's Park is within the London Borough of Brent, about 1 mile north of Kilburn. Homes in Queen's Park are part of the area we cover for TV and media units. In Brent, Queen's Park is one of the places we cover.
Design visits and fitting in NW6, W9 and W10 work the same way as everywhere else we cover. If your home is on a street such as Kempe Road, Peach Road and Parry Road, or close by, we can arrange a design visit for TV and media units. Other places close to Queen's Park include Kilburn (1 mile north), Kensal Rise (1 mile west), Kensal Town (1 mile south-west), Brondesbury (1 mile north) and Kensal Green (1 mile west). Elsewhere in Brent, we also cover Neasden (2 miles north-west), Harlesden (2 miles west), Wembley (4 miles north-west), Kenton (6 miles north-west), Church End (2 miles west) and Willesden (2 miles north-west). Queen's Park is among the bigger places we cover in Brent.
Local landmarks in Queen's Park
The streets we cover here include those near The Brondesbury Arms, St Augustine's Church of England High School and Maida Vale School. There is a railway station in Queen's Park itself: Queens Park (London) station. Nearby you’ll also find Paddington General Hospital (0.8 miles south) and O2 Centre (1.3 miles north-east). Open spaces near Queen's Park include Greville Place nature reserve.
Also near Queen's Park
Other services in Queen's Park
From workshop to your room
When we arrive on fitting day, we start by protecting your floors and the route from the front door to the room. Next, we carry in the sections made at our workshop, a piece at a time. How long the fitting takes depends on the size of the unit and how many cupboards and shelves it has, and we confirm the fitting days in your quote. In a period home, the furniture is fitted to walls that aren’t straight, so each piece is trimmed and adjusted on site. We protect the floors and keep dust to a minimum. It is useful to let us know about parking at the measuring visit, as terraced streets are often busy.
- You get in touch with details of the room and where it is in your home.
- At the design visit we measure the wall and also the hall, stairs and doorways the unit has to pass through.
- A quote in writing follows, setting out the design, materials and finish.
- The unit is built in our workshop from moisture-resistant MDF and birch plywood, in sections that fit the route in.
- We bring the sections in, join them on the wall and scribe them to fit. The finish is sprayed beforehand or painted by hand on site.
Getting ready for fitting day
- Clear the walls of pictures and shelves
- Empty the space we will be working in
- Let us know about parking near your home
Ask for a quote
It’s useful to see the room before we come. Pictures of the whole wall, the corners and the ceiling line tell us a lot about the space. To send them over, tell us about the room on our contact form, and we’ll suggest a time for a design visit.