Bexley · London
Under-stairs storage in West Heath, Bexley
Under-stairs storage for your home in West Heath: pull-out drawers, cupboards and coat storage under the stairs. Each piece is designed at a visit to your home, made at our workshop and fitted by us.
- A meter or fuse board buried behind clutter
- Nowhere to put coats, shoes and bags
- A staircase with untidy space beneath it
Under-stairs storage designed for your room
Making use of tricky spaces in West Heath
The biggest shares of homes in the area around West Heath were built between 1919 and 1939 (about 73%) and between 1945 and 1972 (about 17%), based on the Valuation Office Agency’s 2025 council tax data. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. There’s a conservation area within about a quarter of a mile of the centre of West Heath, according to Historic England’s records. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house does not normally need permission. Your council can advise if you are unsure. Detached and semi-detached houses are home to about 79% of households in the streets around West Heath, according to Census 2021. A house like that normally has more rooms to plan around than a flat, and sometimes a driveway that makes unloading easier.
The wider area includes historic houses like Danson House, about 1.5 miles south. For a period home anywhere nearby, the cupboard door under a period staircase can be kept or replaced to match the new storage. Close to Lesnes Abbey Woods? Under-stairs cupboards can be designed to hold outdoor kit, from walking boots to picnic things. If you live in a flat close to Abbey Wood station, check any building rules on lifts and working hours early, and the sections will be sized for the way in.
West Heath is about 3 miles south of Sidcup, within the London Borough of Bexley. Anywhere in West Heath, the process is the same: we visit and measure, send a quote in writing, make the furniture in our workshop and fit it. In Bexley, West Heath is one of the places we cover, and the borough has 27 places on our list.
In DA7, DA16 and SE2, the process is the same as anywhere else in London. We cover homes on streets such as Hurst Lane, Hadlow Road and Denton Road, for under-stairs storage and any of our other fitted furniture. The A206 runs close to West Heath; on busy main roads, unloading under-stairs cupboards takes a little planning. We also cover Abbey Wood (1 mile north-west), Crook Log (1 mile south), Lessness Heath (1 mile north-east), Upton (1 mile south) and Bexleyheath (1 mile south-east). Other parts of Bexley we cover include Sidcup (3 miles south), Erith (2 miles east), Bexley (2 miles south), Northumberland Heath (2 miles east), Albany Park (4 miles south) and Bexley Riverside (2 miles east).
Around West Heath
Our area takes in the homes around Co-op pub and Welling School and the streets around them. West Heath’s nearest station is Abbey Wood station, about 1 mile north of the centre. Nearby you’ll also find Bexley Hospital (1.4 miles south) and Broadway Shopping Centre (1.7 miles south-east).
How we make under-stairs storage for West Heath
Under-stairs storage is not only for houses. Maisonettes, split-level flats and homes with stairs down to a lower floor often have usable space beneath the steps. The parts we make in our workshop are sized to get through the doors and hallways on the way in. Wherever your home is in West Heath, the process is the same. People usually come to us about the low end of the space going to waste and an under-stairs cupboard full of clutter, and the answer is built in our workshop from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish.
Around West Heath, interwar houses or semi-detached and detached homes make up a good part of the housing. If yours is a 1920s or 1930s house, the bay window at the front, the space under the stairs and the box room are the usual places to gain storage. Any meters or fuse boards that need to stay reachable are designed around.
Once you’ve read the quote and decided to go ahead, the furniture is made at our workshop. The quote sets out the agreed design, materials and finish, so every detail can be checked first.
- Place
- West Heath (DA7, DA16, SE2)
- Area
- Bexley
- Prices
- Quoted for your room
- How it starts
- We visit, measure, then quote
- Making
- Workshop-made, then fitted
- Materials and finish
- MDF and birch plywood, painted
- Working days
- Weekdays, and Saturdays by prior arrangement
- Get in touch
- Our contact form
- Page updated
- 27 October 2026
Neighbourhoods near West Heath
More for homes in West Heath
Fitting day, step by step
The last stage of the day is the finish. With a spray finish from the workshop, there’s usually only filling and touching up to do in the room; if you chose hand painting, that can be done in the room once the furniture is fitted. The finish is always the one agreed in your quote. It helps to clear the room and the route before we arrive. On the day, we cover the floors first, then bring the sections in. Each piece is levelled, scribed where the wall wanders and fixed to suit the wall.
- You get in touch and tell us what’s under the stairs now, including any gas meter, electricity meter or fuse board.
- At the design visit we measure the space and plan the storage around the meters, so readers and engineers can still reach them.
- A quote in writing follows, setting out the design, materials and finish.
- The storage is built in our workshop from moisture-resistant MDF and birch plywood, with access to the meters planned in.
- The storage is fitted and set level, and the meter access is checked with you.
Before fitting day
- Empty the space we will be working in
- Let us know about any meters, fuse boards or boilers in the area
- Move anything in the hall or on the stairs out of the way
Getting a quote
To get a quote, use our contact form and tell us a little about the room and roughly what you’d like. We then arrange a design visit to measure and go through the design, and a written quote follows.
Advice
Flats, blocks and rented homes
In conversions and newer blocks, many internal walls are timber or metal stud with plasterboard. Fixings are chosen to suit whatever the wall is made of, which we check at the measuring visit.
Landlords furnishing a let use fitted furniture too, often to make the most of a small or awkward room. The materials are the same as for any home: moisture-resistant MDF and birch plywood.
When is bespoke worth it?
What you pay for with bespoke is mainly the fit: edges scribed to the wall, a level base on a sloping floor and a neat line where the furniture meets the ceiling. In an older room, standard units rarely manage that.
Standard units come in set widths and heights, so there’s often a strip of wasted space at the side or above. Fitted furniture is made to the room’s measurements, so it can use the full height and width.
Bespoke or off-the-shelf?
Period walls are rarely flat, and floors are often out of level. Ready-made units leave gaps that need filler pieces. We scribe each under-stairs cupboard to follow the walls and the stairs, and set it level on a plinth or adjustable feet. Bays, box rooms and stair bulkheads are where off-the-shelf furniture struggles most, and those are common in interwar houses. Fitted furniture is made around them.
There’s no price list, because every piece is designed for one room. Instead, we measure, talk through the design and then quote in writing, naming the materials and finish. To start, tell us about the room on our contact form.
Why choose us
- We work across all London boroughs
- Fitted tight to walls that aren’t straight
- Made for your room, not a standard size
- Made in moisture-resistant MDF and birch plywood
See how bespoke compares with ready-made and what to look for in a quote.
Boards, parts and paint
Birch plywood
Drawers under the stairs often carry heavy things, from shoes to the vacuum cleaner. Birch plywood suits them, as it is strong and holds screws well. Long shelves benefit from it too.
Doors and drawer fronts
We make the fronts from moisture-resistant MDF and finish them in the colour you choose. The angled fronts are cut to match the stairs, so the gaps stay even all the way along.
Questions from West Heath
Can parking be tricky on fitting day in West Heath?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. It helps to let us know about parking during the design visit.
Do I need permission for fitted furniture in a conservation area?
Usually not: conservation area rules mainly cover the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. If your home is listed, internal works that affect its character can need listed building consent, so check with the council first. If you’re unsure, the council can confirm.
Can you make under-stairs storage for a home in West Heath?
Yes. Our area is the whole of London: every borough and the City of London, and that includes West Heath.
Can the under-stairs storage be painted to match the hall?
Yes. You choose the colour, and we agree it before the work starts. We can spray it in the workshop or hand-paint it in your home. Both can be matched to a colour you already have.
Is an outside wall a problem for fitted furniture?
An outside wall can be colder and damper than an inside one, so we allow for ventilation behind and inside the furniture. Any damp needs sorting by the right specialist before fitting.
Could the space under my stairs take a desk?
That depends on the shape of your stairs and the room beside them. We look at it at the measuring visit and tell you honestly whether it will work. Where it works, it makes a neat spot for a laptop and paperwork.