Tower Hamlets · London
Wall beds in Coldharbour, Tower Hamlets
In Coldharbour, we design wall beds around the room you actually have. Your wall bed is designed at a visit to your home and built in our workshop.
- A guest bed that disappears in the day
- A flexible room for a growing family
- A guest room that sits empty most of the time
Need wall beds in Coldharbour?
Wall beds for homes in Coldharbour
Safety starts with the fixing: the mechanism is fixed as its maker specifies, into a wall or floor that’s sound enough to hold it. At the design visit we look at the wall it will go on, because the fixing has to suit what the wall is made of. If your home has a guest room that sits empty most of the time and a guest bed that disappears in the day, that is what wall beds are for, made from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish.
Many homes around Coldharbour have been built since 2000, and newer bedrooms are often compact, with plasterboard walls. Heavy pieces are fixed into the studs or stand on the floor, rather than relying on the board alone. Any built-in cupboard that came with the home can be replaced or extended to match.
Materials are named in the quote: moisture-resistant MDF and birch plywood, each used where it suits the job. It also says how the furniture will be finished: spray painted or hand painted.
- Place
- Coldharbour (E14, SE10, E22)
- Borough
- Tower Hamlets
- Prices
- Quoted for your room
- How it starts
- Design visit, then a quote in writing
- Made
- Made in our workshop and fitted on site
- Boards and paint
- Painted MDF and birch ply
- Working days
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Last updated
- 27 October 2026
Tips worth knowing
These points come up often when people plan wall beds. They’re worth knowing before and after fitting:
- Tell us what the wall is made of if you know
- Keep the floor in front clear before lowering the bed
- Check mattress size and weight limits
- Decide who the bed is mainly for
If the bed ever feels different when you lower or lift it, stop using it and get in touch. Do not try to adjust the mechanism yourself unless its maker says you can.
Think about who will sleep in the bed and how often. It shapes the bed size and the type of mechanism as well as the storage around it.
FAQs: wall beds in Coldharbour
How do you fit wall beds in a flat in Coldharbour?
We measure the route in as well as the room: the stairs, landings, lift and doors. The furniture is made in sections that fit the stairs and lift, and put together in the room. It is useful to check any building rules and your lease before fitting day.
Can you make wall beds for a home in Coldharbour?
Yes, we work across Tower Hamlets, Coldharbour included, and across the rest of London. To get started, you can drop us a line using the contact form with some details.
Do you work on Saturdays?
Yes, by arrangement. If a Saturday works better for you, say so when you contact us.
Can you fit a wall bed to a stud wall?
It depends on the wall and floor. The mechanism has to be fixed securely as its maker specifies, to a wall or floor that can take the load, and we look at this when we measure.
Can you add sockets inside the units?
No. We’re carpenters, so electrical work is for your electrician. We can plan cable routes into the design, and new sockets should be in place before fitting day.
Is a mattress included with the wall bed?
What matters most is that the mattress suits the mechanism. We’ll explain its limits during the design visit, so you can pick the right one.
What it’s made from
Spray-painted finish
The colour is agreed with you before we spray.
Hand-painted finish
Hand painting suits a cabinet that should match the room’s woodwork.
Bedrooms in Coldharbour: local notes
In the streets around Coldharbour, the largest groups of homes date from the years since 2000 (about 82%) and between 1973 and 1999 (about 10%), on the Valuation Office Agency’s council tax figures for 2025. Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. The National Heritage List has 20 entries within half a mile of the centre of Coldharbour. Older homes nearby may have original joinery, shutters or panelling worth keeping, and the furniture can be designed around them rather than over them. About 82% of homes around Coldharbour were built since 2000, well above the figure for Tower Hamlets as a whole, about 45%, on the Valuation Office Agency’s council tax figures for 2025. That makes plasterboard stud walls and compact rooms more likely, which shapes the fixings and sizes.
Near listed buildings like Church of St Matthias, about 0.6 miles north-west of the centre of Coldharbour, older homes may keep original joinery that wall beds can be designed around. For a listed home, fixing into original features can need listed building consent. If your children go to Woolmore Primary School or a school nearby, hanging rails set low at first can be raised later, as children get taller.
Coldharbour is about 3 miles west of Whitechapel, part of the London Borough of Tower Hamlets. Design visits and fitting in Coldharbour can be on a Saturday, by arrangement. We list Coldharbour among 31 places we cover in Tower Hamlets.
We make wall beds across E14, SE10 and E22. You’ll find streets here like Canada Square, Simpson's Road and Amsterdam Road, and homes on each of them are within our area for wall beds. The A1206 and A1261 runs close to Coldharbour; on busy main roads, unloading wall beds takes a little planning. Other places close to Coldharbour include Blackwall (1 mile north-east), London Docklands (1 mile west), Poplar (1 mile north-west), Canary Wharf (1 mile west) and Heron Quays (1 mile west). Other parts of Tower Hamlets we cover include Whitechapel (3 miles west), Spitalfields (3 miles west), Tower Hill (3 miles west), Bethnal Green (3 miles north-west), Cambridge Heath (3 miles north-west) and Mile End (2 miles north-west).
Near you in Coldharbour
We fit furniture in homes around Tower Hamlets College, The Gun pub and Canary Wharf College 3. The nearest railway station is Canary Wharf station, about 0.5 miles north-west. Nearby you’ll also find Greenwich Castle (1.7 miles south) and Poplar Hospital (0.6 miles north). Green spaces nearby include Lavender Pond.
What we don’t do
Not everything around wall beds is carpentry, from an electrician to a plumber or a Gas Safe engineer. Here’s what to know:
- Mattresses, which you choose to suit the mechanism
- Strengthening or rebuilding a wall
- Plastering or decorating the room
If in doubt, you can message us from the contact page and describe the room. How it works.
Materials and parts
- Spray-painted finish
- Hand-painted finish
- Shelves or a desk alongside
- Birch plywood
- Moisture-resistant MDF
- Fold-down bed mechanism
Why people ask for wall beds in Coldharbour
Others want the bed to be part of a wider storage wall. Shelves, cupboards or a desk built around it make the whole wall useful.
If you recognise any of these, it is worth talking to us:
- A flexible room for a growing family
- A guest room that sits empty most of the time
- A real mattress for visitors
- More floor space in a studio flat
Queen's House, about 1.5 miles south, is one of the historic houses in the wider area. For a period home anywhere nearby, tall ceilings give wall beds room to reach the cornice.
Before you hire any carpenter
- Whether they can show you real projects they’ve done
- Are the boards named, such as MDF or plywood?
- Whether the route into your home has been checked
- Do they scribe the furniture to the walls?
How fitting works for wall beds
Period rooms often have skirting boards, picture rails, cornices or coving for the furniture to meet. We cut and scribe the furniture around them on site, so it sits neatly against the room. How long the fitting takes depends on the size of the bed and the cabinets around it, and we confirm the fitting days in your quote. Newer homes often have finished floors, painted walls and new doors that mark easily, so we protect the route before carrying anything in. Door frames and corners get covers too. Once inside, the pieces are joined in place.
- You get in touch and tell us about the room and how often the bed is used. A desk or shelving around the bed can be part of it.
- We visit, measure up and check the wall the bed will fix to. We also check there’s clear space in front to lower the bed.
- A quote in writing follows, covering the cabinet, the storage and the finish, for you to look over.
- We build and finish the bed housing and storage in our workshop.
- We fit it in your home, with the mechanism fixed as its maker specifies.
Before fitting day
- Let us know about any meters, fuse boards or boilers in the area
- Move anything in the hall or on the stairs out of the way
- Take down pictures, mirrors and shelves from the wall
Ask for a quote
To get a quote for wall beds in Coldharbour, send us a few details through our contact form. Let us know the room and the rough idea. We will arrange a design visit, then send a quote in writing.