Example photo by Franco Debartolo on Unsplash, not our project
Camden · London
Window Seats in Haverstock
We make window seats for homes in Haverstock, designed around the room you have. We design your window seat at a visit to your home, make it in our workshop and fit it.
- A ready-made bench that does not fit the bay
- Unused space below a sash window
- Needing more storage in the room
Window seats in Haverstock
How we make window seats for Haverstock
In many period houses, a bay window is the obvious place for a seat. Bays have angled sides, and their walls are seldom square or flat. We measure every face and scribe the seat to follow them, so it sits neatly in the bay without gaps. It’s the kind of space where a ready-made bench never quite fits. Most enquiries start with toys spread across a bedroom floor and a period room that needs furniture to suit it; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
Around Haverstock, a large share of homes date from before 1919, and houses of that age are full of awkward spaces: under the stairs, in the bay, along the hall and under the eaves of a converted loft. Fitted storage is designed to make those spaces useful, made to follow walls that are seldom true.
A written quote is the clearest record of what we’ve agreed. It describes the window seat we have designed for the room, its materials and its finish, and it is what the workshop builds to.
- Where
- Haverstock (NW3, NW5, NW1)
- Borough
- Camden
- Price
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Making
- Workshop-made, then fitted
- Materials and finish
- Painted MDF and birch ply
- When we fit
- Weekdays; Saturdays on request
- Enquiries
- The contact form
- Updated
- 27 October 2026
Storage in Haverstock homes: local notes
Homes built before 1919 make up about 46% of the housing in the neighbourhood around Haverstock, with about 23% built between 1945 and 1972, according to Valuation Office Agency council tax figures (2025). It’s a good starting point, though every room is still measured, as two homes of the same age rarely match. Within a mile of the centre of Haverstock, 15 conservation areas are recorded by Historic England. England has around 10,000 in all, and their controls are mostly concerned with the outside of buildings. About 46% of homes in the area around Haverstock were built before 1919, on the Valuation Office Agency’s council tax figures for 2025. Bays and sash windows in period houses suit a seat with drawers or a lift-up lid.
If you live near Primrose Hill, window seats can be designed to hold outdoor kit, from walking boots to picnic things. If your home is one of the older houses near Church of St Mary the Virgin, the deep reveals of an older window can frame a seat neatly.
Haverstock is within the London Borough of Camden, about 2 miles south-east of St Pancras. Homes in Haverstock are part of the area we cover for window seats, as part of our work in every London borough. We list Haverstock among 28 places we cover in Camden.
Every home in NW3, NW5 and NW1 is within our area for window seats. You’ll find streets here like Eton Road, Lawn Road and Ornan Road, and homes on each of them are within our area for window seats. We also cover Belsize Park (1 mile north), Primrose Hill (1 mile south), South Hampstead (1 mile west), Swiss Cottage (1 mile west) and Chalk Farm (1 mile east). We also make window seats in nearby places such as St Pancras (2 miles south-east), West End (3 miles south-east), St Giles (3 miles south-east), Seven Dials (3 miles south-east), Holborn (3 miles south-east) and Bloomsbury (2 miles south-east).
Landmarks near Haverstock
We fit furniture in homes around St Paul's Church of England Primary School, St. Mary's Town and Country School and The Washington pub and the streets around them. Haverstock’s nearest station is South Hampstead station, about 0.7 miles west of the centre. Other landmarks nearby include Isokon Gallery (0.5 miles north) and O2 Centre (0.8 miles west). For a walk, there is Adelaide Nature Reserve.
What happens on fitting day
Finishing comes last. If the furniture was spray painted in the workshop, we fill the fixing holes and touch up on site; hand painting, if that’s what you chose, can be done in place once everything is fitted. Either way, the finish is the one set out in your quote. Scribing is done on site, which means some cutting in the room or close by, so a clear area to work in near the room helps. Dust is kept down and cleared up as we go. Where the finish is hand-painted, it can be done after the pieces are in.
- You send us a note about the window and the seat you’d like.
- We visit to measure and discuss the design, the storage and the finish.
- A quote in writing follows, with the finish written in.
- We build the seat in our workshop from moisture-resistant MDF and birch plywood, ready for the finish you chose.
- We fit it in your home, and a hand-painted finish is applied in the room.
- Give new paintwork gentle use while it cures; a hand-painted finish is easy to touch up later.
Before fitting day
- Mention any parking restrictions on your street
- Tell us about any meters, fuse boards or boilers in the area
- If you live in a block, book the lift and tell the building manager
How to get a quote
If you already have something in mind, tell us; if you do not, that is fine, and we can work it out together. At the design visit, we measure up and talk the design through with you, and the written quote that follows sets it out. To start, send us a few details through our contact form.
Related advice
Questions from Haverstock
Will parking be an issue for fitting furniture in Haverstock?
It can be: much of inner London is covered by controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you at the measuring visit, so the day can be planned around it.
Can you fit window seats to the uneven walls of an older house in Haverstock?
Yes. Walls in older houses are rarely flat or square, and floors are often out of level, so each piece is scribed to follow the wall and set level on a plinth or adjustable feet. Skirting, picture rails and cornices are met neatly or cut around. Fixings are chosen for the wall, whether solid brick or lath and plaster.
Can the fitting be on a Saturday?
Yes, by prior arrangement. Let us know when you contact us if a Saturday suits you best.
Do I need to be in when you fit?
Someone needs to let us in at the start of the day. It also helps to have someone around at the end, so we can go over the finished furniture together.
Is the cushion included with the window seat?
We do not supply cushions; we make the seat and you can have a cushion made. You’ll have the measurements to pass to a cushion maker. It leaves you to choose the fabric.
Should I choose a lift-up lid or drawers?
It depends on what you’ll store and how often you’ll reach for it. A lid gives access to the whole space, good for blankets and occasional things, while drawers are easier with a cushion on top.
What window seats can’t fix
We’re carpenters, so some jobs belong to other trades. It helps to know these before you plan the job:
- Painting the walls of the bay
- Any wiring, which needs an electrician
- Repairs to sash windows, cills or shutters
If you’re not sure what’s possible in your room, you can fill in our short enquiry form and we will give you a straight answer before you arrange a visit. Our process from visit to fitting.
Boards, parts and finishes
- Spray-painted finish
- Birch plywood
- Lift-up lids or drawers
- Radiator grilles
- Hand-painted finish
- Moisture-resistant MDF
Nearby places to Haverstock
More for homes in Haverstock
Boards, parts and paint
Moisture-resistant MDF
Because it cuts cleanly, MDF is ideal for angled panels and radiator grilles. The grade we use is moisture-resistant and paints well. Most of what you see on the finished seat is MDF.
Hand-painted finish
A hand-painted finish can be done in your home after fitting. It is easy to touch up if it gets marked. It suits a seat that sees daily use.
Do you need window seats in Haverstock?
A window seat fits well with the sash windows and bays of many older houses. Painted to match the woodwork, it can look as though it has always been there. That appeals to people restoring or updating an older home.
People normally get in touch with us about things like these:
- An empty bay that does not get used
- Off-the-shelf pieces that never quite fit the window
- Wanting a seat without blocking the radiator
- A nursery or bedroom short of storage
If you live in a flat close to South Hampstead station, it helps to book the lift and tell the concierge before fitting day.
Questions to ask before you hire anyone
- Which parts of the job need an electrician or a plumber
- How the furniture will be finished, and where
- A quote in writing that sets out the job
- Where they’ll park and unload
Flats, conversions and lettings
In conversions and newer blocks, many internal walls are timber or metal stud with plasterboard. We choose fixings to suit the wall, after checking the walls at the design visit.
Leaseholders should check the lease before anything is fixed to the walls. Some leases need the building owner’s consent for alterations, and that’s best sorted before fitting day. We cannot give advice on leases, so check it yourself or ask your managing agent.