Example photo by Franco Debartolo on Unsplash, not our project
Camden · London
Window seats in Seven Dials, Camden
Window seats for bays and under sash windows, with storage inside, for homes in Seven Dials. After a design visit and a written quote, it is built in our workshop and fitted in your home.
- A bay window that’s hard to furnish
- A recess under the window doing nothing
- Wanting new furniture to sit well in an older room
Window seats designed for your room
About our window seats in Seven Dials
Bay windows are common in period homes, and they make a natural place for a seat. Bays have angled sides, and their walls are seldom square or flat. We measure every face and scribe the seat to follow them, so it sits neatly in the bay without gaps. It is a job that suits bespoke work, in Seven Dials or anywhere else. Typical reasons to get in touch are a radiator that makes the space hard to use and a period room that needs furniture to suit it, and the answer is built in our workshop from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.
A Victorian or Edwardian terrace usually has a long, narrow hall leading to the stairs. Around Seven Dials, a large share of homes date from before 1919, so every bit of depth is weighed up when storage is planned. Even shallow storage can hold a lot without narrowing the way through.
Everything we agree during the design visit goes into the written quote: the layout and internal fittings, the materials and the finish. If something is not quite right, tell us before anything is made.
- Place
- Seven Dials (W1F, W1D, W1T)
- Area
- Camden
- Prices
- Quoted for your room
- To begin
- Design visit, then a written quote
- Made
- In our workshop, then fitted in your home
- Boards and paint
- MDF and plywood, painted to order
- When we fit
- Monday to Friday; Saturdays by arrangement
- Enquiries
- Our contact form
- Updated
- 27 October 2026
How fitting works for window seats
Before anything is fixed, we set the furniture level. Where the floor slopes, we bring the furniture up to level on adjustable feet or a plinth, and that keeps the doors and shelves true. Only then is it fixed to the wall, with fixings chosen to suit brick, lath and plaster or plasterboard. In a period home, the furniture is fitted to walls that aren’t straight, so each piece is trimmed and adjusted on site. We protect the floors and keep dust to a minimum. Parking can be tight on terraced streets, so let us know about permits and bays during the design visit.
- First we hear about your bay or window and what you’d like, with a note of any radiator or shutters.
- We measure the window, the cill and any radiator or shutters. Then we go through the seat height and storage.
- The design is agreed and a written quote follows. Take your time with it.
- The seat is made at our workshop and painted in your colour. The materials are moisture-resistant MDF and birch plywood.
- The seat is fitted, scribed to the walls and checked with you.
How to prepare
- Get any new sockets or wiring done by your electrician before fitting day
- Check the building’s rules for trades and lift bookings
- Keep pets out of the room and the hallway
Starting with a design visit
It helps to see the room before we come. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space, along with rough sizes. To share them, tell us about the room on our contact form, and we will suggest a time for a design visit.
Read more
Bespoke or off-the-shelf?
Off-the-shelf furniture can be a sensible choice. If the walls are straight and the space suits standard sizes, it often does the job, and it is easy to buy.
It is worth being honest about cost: off-the-shelf furniture normally costs less up front. Bespoke makes more sense where the room is awkward, the space is valuable or you want the furniture to look built in.
Made for the room, or bought in a box?
One advantage of a standalone bench is that it can go with you. A fitted seat is designed to stay, and it uses the space in a way a standalone piece can’t. Which suits you depends on your plans. Alcoves and recesses in period houses are rarely a standard width or depth, so off-the-shelf pieces either don’t fit or leave a gap either side. Made for the space, the furniture uses the full width and height.
The finish affects the cost: spray painting is done in the workshop, while hand painting can be done on site. Your choice, along with the size and the fittings, is reflected in the written quote.
What you get with us
- Designed for the room you have
- Saturday visits and fitting by arrangement
- More than 300 projects completed
- A design visit, then a quote in writing
Take a look at how bespoke compares with ready-made or what a quote should include.
Common questions about window seats
Can you fit furniture in a home close to Tottenham Court Road station?
Yes, homes across Camden and the rest of London are within the area we cover. You can drop us a line using the contact form to arrange a design visit, and let us know about parking and access at the same time.
Can you make window seats for a home in Seven Dials?
Yes, Seven Dials is within the area we cover, which takes in all of Camden and the rest of London. We start with a design visit to measure the room and talk through what you need, and then we send a quote.
Is an outside wall a problem for fitted furniture?
It can be done with some care: ventilation behind and inside the furniture helps avoid condensation and mould. Damp treatment is not something we do, so any damp needs sorting first.
Does fitted furniture need planning permission?
Not typically. Conservation area controls are mostly concerned with the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different: check with the council’s conservation officer first.
Do you work on Saturdays?
Yes, by prior arrangement. If a Saturday works better for you, say so when you get in touch.
What happens when you come to measure?
We measure the room, check how level the walls and floors are and talk through the design with you. Access and parking are worth talking about too, and afterwards we send a quote in writing.
Window seats in Seven Dials: local notes
About 49% of the homes in the area around Seven Dials went up before 1919, and about 21% since 2000, based on the Valuation Office Agency’s 2025 council tax data. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. Part of Seven Dials is in the Seven Dials (Covent Garden) Conservation Area, one of the conservation areas recorded by Historic England. Fitted furniture inside a house doesn’t normally need planning permission in a conservation area, as the controls are mainly about the outside of buildings. If in doubt, the council’s planning team can confirm. In inner London, a large part of the street parking sits inside borough-run controlled parking zones. In Seven Dials, a van will typically need a visitor permit, a paid bay or a suspended bay, and the council arranges suspensions, often with notice. It is useful to tell us about parking at the measuring visit.
If your home is as old as some of the listed buildings nearby, such as Church of St Giles in the Fields, original features like shutters, panelling and fireplaces are worth designing around. If your own home is listed, check with the council before fixing into original features. Benjamin Franklin House, about 0.4 miles south, is one of the historic houses in the wider area. If your own home is a period one, a radiator under the window just needs a grille in the seat front. Close to St Anne's Churchyard? Living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place.
Seven Dials is about 1 mile north-east of St Pancras, part of the London Borough of Camden. Design visits and fitting in Seven Dials can be on a Saturday, by prior arrangement. Across Camden, we cover Seven Dials.
We cover every part of the W1F, W1D and W1T postcode area. You will find streets here like Duck Lane, Drury Lane and Bridle Lane, and homes on each of them are within our area for window seats. Seven Dials is near the A301 and A400, so if your home is on a main road, mention it when you contact us. Nearby, we also make window seats in St Giles (1 mile north), West End (1 mile west), Soho (1 mile west), Covent Garden (1 mile east) and Chinatown (1 mile south-west). We also make window seats in nearby places such as Hampstead (4 miles north-west), West Hampstead (4 miles north-west), Agar Town (2 miles north), Kentish Town (2 miles north), Greenhill (4 miles north-west) and Chalk Farm (2 miles north-west). Seven Dials is among the bigger places we cover in Camden.
Landmarks near Seven Dials
The streets we cover here include those near LSE Shaw Library, Two Brewers pub and Mercers' School. There is a railway station in Seven Dials itself: Tottenham Court Road station. Nearby you will also find St Paul's Hospital (less than half a mile north-east) and Leverian collection (close by, under half a mile south-west). Green spaces nearby include Ludgate Hill and St. James's Park Lake.
Boards, parts and paint
Hand-painted finish
Hand painting can be done on site once the seat is in. It is easy to touch up if it gets marked. That helps on a well-used seat.
Doors and drawer fronts
A radiator grille sits in the front of the seat, letting the heat reach the room. It is finished like the rest of the seat. Around it, the fronts can be drawers, doors or panels.
Where other trades come in
It helps to know what’s outside our work before you plan:
- Any wiring, which needs an electrician
- Making the seat cushion, which isn’t our work
- Repairs to sash windows, cills or shutters
If you’re not sure what’s possible in your room, you can message us from the contact page and we will give you a straight answer before you arrange a visit. Our process from visit to fitting.
What goes into it
- Lift-up lids or drawers
- Spray-painted finish
- Radiator grilles
- Birch plywood
- Hand-painted finish
- Moisture-resistant MDF