Lambeth · London
Streatham Fitted Cupboards
Fitted cupboards in Streatham: built-in cupboards for hallways, landings, utility rooms and boot rooms. Each piece is designed at a visit to your home, made in our workshop and fitted by us.
- A hallway cupboard for coats and shoes
- A linen cupboard on the landing
- Cupboards that sit well with skirting and coving
Ask about fitted cupboards in Streatham
Fitted cupboards for homes in Streatham
A boiler cupboard needs more thought than most. The boiler maker’s instructions set out the clearances and ventilation it needs, and the cupboard is built to respect them. We make sure the doors open fully so the boiler can be serviced, and any work on the boiler itself is for a Gas Safe engineer. We make fitted cupboards from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish, and the usual reasons to get in touch are floor-to-ceiling storage in a flat and cupboards for a utility or boot room.
In streets where many homes were built before 1919, as they were around Streatham, the space under the stairs in a terraced house often holds the gas meter, the electricity meter or the fuse board. Meter readers and engineers need to get to them, so the design keeps them accessible. Sash and bay windows are common in houses of that age too, and good places for seating with storage below.
If the job needs another trade, like an electrician or a plumber, we will tell you, so it can be arranged before fitting day. Our quote covers the carpentry: the design, the materials and the finish.
- Where
- Streatham (SW16, SW2, CR4, SW12)
- Borough
- Lambeth
- Price
- Quoted for your room
- First step
- Design visit, then a quote in writing
- Where it’s made
- Made in our workshop and fitted on site
- Boards and paint
- Painted MDF and birch ply
- When we fit
- Monday to Friday; Saturdays by prior arrangement
- Get in touch
- The contact form
- Page updated
- 27 October 2026
Your questions about fitted cupboards in Streatham
Is parking a problem for fitting in Streatham?
It can be: much of inner London is covered by controlled parking zones. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you at the measuring visit.
Do you cover homes near Streatham station?
Yes. We cover all of Lambeth and the rest of London. You can get in touch through our contact form to arrange a design visit.
What if the wall is cold or damp?
It needs a little planning: leaving ventilation behind and inside helps stop condensation. Damp treatment is not something we do, so any damp needs sorting first.
How much time does fitting need?
The time the fitting takes depends on the number of cupboards and the space they fit into, and your quote sets out the fitting days.
Do I need permission in a conservation area?
Typically not. Inside a house, fitted furniture doesn’t normally need planning permission. If the building is listed, works affecting its character can need listed building consent, so check with the council first.
Does someone need to be home during the fitting?
We need someone to let us in. It is good to have someone there at the end to look over the work with us.
Why bespoke in Streatham?
A flat-pack or ready-made cupboard is quick to buy and often cheaper, and in a square room they can work well. Where walls lean and floors slope, they rarely sit flush. A fitted cupboard costs more but follows the room. Ready-made units stop well short of a tall period ceiling, wasting space that could hold things you rarely use. Built-in pieces can run to the cornice or the picture rail.
The finish affects the cost: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.
Why us?
- Moisture-resistant MDF and birch plywood
- 300+ projects completed
- Work across the whole of London
- Built in our workshop and fitted in your home
Take a look at our comparison of bespoke and off-the-shelf or what a quote should include.
Flats, leases and landlords
If your building is on a red route or a busy main road, unloading takes some planning. Red routes are run by TfL and have strict stopping rules, so it’s worth raising during the design visit.
Blocks of flats often have their own rules on lift bookings, entry systems and times for trades. Let us know about them at the measuring visit, so fitting day is planned around them.
Neighbourhoods near Streatham
Also in Streatham
What it costs
We quote each job after the design visit, because no two rooms are the same. These are the things that affect it:
- The finish: spray painted or hand painted
- Access to the room, like stairs, lifts and narrow halls
- Parking near your home
- How square the room is
Parking is part of the price picture in London. The boroughs run controlled parking zones across much of the city, so we may need a visitor permit, a paid bay or a suspended bay. Tell us about parking during the design visit, so it can be planned.
Before the design visit
Some details help us understand the job before we visit. It is useful to include:
- Whether it is a house or a flat, and if there are stairs or a lift
- Your postcode and the borough
- Anything in the way, like radiators, sockets, switches, a boiler or meters
- Pictures showing the full wall, from floor to ceiling
To make a start, tell us about the room on our contact form and let us know which room you have in mind and roughly what you’d like. We then arrange a design visit to measure and go through the design, and send you a written quote afterwards.
Fitted cupboards in Streatham: local notes
In the area around Streatham, the largest groups of homes date from before 1919 (about 55%) and between 1919 and 1939 (about 17%), according to Valuation Office Agency council tax figures (2025). That matters for fitted cupboards, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. There are 18 entries on the National Heritage List within half a mile of the centre of Streatham. You can check whether a particular building is listed on Historic England’s list. TfL’s red routes have strict stopping rules. Where a home in Streatham is on or beside a main road, it is useful to mention that at the design visit. It lets us plan the stop before fitting day.
Near listed buildings like Roman Catholic Church of the English Martyrs, less than half a mile north-west of the centre of Streatham, older homes may keep original joinery that fitted cupboards can be designed around. For a listed home, fixing into original features may need listed building consent. Close to Streatham Common? Fitted cupboards can be designed to hold outdoor kit, from walking boots to picnic things. Kingswood House, about 2 miles east, is one of the historic houses in the wider area. For a period home anywhere nearby, hallway recesses and alcoves are where fitted cupboards earn their keep.
Streatham is within the London Borough of Lambeth, about 3 miles north of Stockwell. Wherever you are in Streatham, the process is the same: a design visit, a written quote, furniture made in our workshop and fitting in your home. Our Lambeth coverage includes Streatham, along with the rest of the borough.
Every address in SW16, SW2, CR4 and SW12 is within our area for fitted cupboards, from the main roads to the quieter streets. Streets in the area include Stanthorpe Road, Gleneagle Mews and Madeira Road, and we cover homes on all of them for fitted cupboards. Streatham is near the A205 and A216; on busy main roads, unloading fitted cupboards takes a little planning. If you are just outside Streatham, we also cover Streatham Park (1 mile west), Furzedown (1 mile west), Streatham Hill (1 mile north), Hyde farm estate (1 mile north) and Grange Mills (1 mile north-west). Across the rest of Lambeth, our area takes in Stockwell (3 miles north), Kennington (4 miles north), North Brixton (3 miles north), Little Portugal (3 miles north), Clapham (3 miles north) and South Bank (5 miles north). Streatham is one of the larger places we cover in Lambeth.
Landmarks near Streatham
Around Streatham, we cover homes near Waldorf School of South West London, Bishop Thomas Grant Catholic Secondary School and The Holland Tringham pub and the streets around them. Streatham has its own railway station: Streatham station. Other landmarks nearby include Clockworks Museum (1.1 miles east) and Tooting Bec Hospital (1 mile west). Green spaces nearby include Biggin Wood.
Fitting day, step by step
There is not much for you to do on fitting day. We need someone to let us in at the start, and it is useful to have the room cleared beforehand, as agreed during the design visit. After that, it is over to us: the floors are covered, the sections come in and the fitting begins. How long fitting takes depends on the number of cupboards and the space they fit into, and we confirm the fitting days in your quote. On fitting day in an older house, the main job is scribing to walls and levelling on floors that slope, so there’s some trimming and adjusting on site. We protect the floors and keep dust to a minimum. Parking can be tight on terraced streets, so let us know about permits and bays during the design visit.
- You tell us where the cupboards should go and what they need to hold, including anything tricky like a boiler or meter.
- We visit to measure and check how level the floor and walls are.
- A quote follows, setting out the design and finish.
- We build the cupboards in our workshop, using moisture-resistant MDF and birch plywood.
- We fit them in your home, scribed to the walls and set level. A hand-painted finish is applied on site, if you chose one.
Getting ready for fitting day
- Let us know where the boiler and meters are
- Have your electrician move any sockets or switches beforehand
- Clear the walls of pictures and shelves
Getting a quote
It helps to see the room before we come. A few pictures showing the walls, the corners and where the ceiling meets them give us a good feel for the space. To share them, get in touch through our contact form, and we will arrange a design visit.
Related advice
How it is made
Doors and drawer fronts
Doors can be flat, framed or panelled, painted to match the cupboard. Drawers can sit below for shoes or smaller things.
Birch plywood
For heavily loaded cupboards, birch plywood makes a sturdy carcass, such as a linen or utility cupboard.