Example photo by Franco Debartolo on Unsplash, not our project
Barking and Dagenham · London
TV and media units in Dagenham Dock, Barking and Dagenham
For homes in Dagenham Dock, we make TV and media units from moisture-resistant MDF and birch plywood. Each piece is finished by spray or by hand, in the colour you choose.
- Games, controllers and remotes everywhere
- Cables trailing across the wall
- A TV stand that does not fit the wall
Ask about TV and media units in Dagenham Dock
About our TV and media units in Dagenham Dock
The screen size comes first. The opening is planned around your current TV, or a bigger one if you’re likely to upgrade. Viewing height matters too: we set it to suit the sofa, not the shape of the wall. We make TV and media units from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and the usual reasons to get in touch are nowhere good for speakers and equipment with nowhere proper to go.
Ceiling heights across London vary a lot, from tall period rooms to compact modern ones. In Dagenham Dock, as anywhere, we measure the height as carefully as the width, since it sets how tall TV and media units can be. Each section is sized to fit the route into the room.
The quote names the materials: moisture-resistant MDF, birch plywood or both, depending on the design. The finish is stated too, whether that’s spray painting or hand painting.
- Where
- Dagenham Dock (RM9, SE28, IG11)
- Area
- Barking and Dagenham
- Prices
- Quoted for your room
- How it starts
- Design visit, then a quote in writing
- Made
- Workshop-made, then fitted
- Made from
- MDF and birch plywood, painted
- Fitting days
- Weekdays (Saturdays if arranged)
- Enquiries
- Our contact form
- Last updated
- 27 October 2026
Living-room storage in Dagenham Dock
About 91% of the homes in the area around Dagenham Dock went up between 1973 and 1999, and about 7% between 1945 and 1972, according to Valuation Office Agency council tax figures (2025). It is a good starting point, though every room is still measured, as two homes of the same age rarely match. All of London, Barking and Dagenham included, is inside the ULEZ. It applies to every van that comes to fit furniture in Dagenham Dock. Parking and access are planned at the design visit. Red routes, run by TfL, have strict rules on stopping and loading. If your home in Dagenham Dock is on or near a main road, tell us at the measuring visit. We will plan where the van can stop.
For families living near St Peter's Catholic Primary School, a cupboard for board games and a shelf for reading books can go into the same design. Eastbury Manor House, about 2.1 miles north-west, is one of the historic houses in the wider area. For a period home anywhere nearby, picture rails and cornices give TV and media units a line to finish at.
Dagenham Dock is part of the London Borough of Barking and Dagenham, about 2 miles north-west of Barking. We can visit homes in Dagenham Dock on weekdays, or on a Saturday by prior arrangement. We list Dagenham Dock among 11 places we cover in Barking and Dagenham.
Every home in RM9, SE28 and IG11 is covered for TV and media units. Whether you live on a street like Perry Road, Choats Road and Chequers Lane or on one nearby, we can visit to measure up for TV and media units. Close by, we also work in Dagenham Green (1 mile north-east), Hornchurch Marshes (1 mile east), Thamesmead (1 mile south-west), Beam Park (1 mile east) and Barking Riverside (1 mile west). Across the rest of Barking and Dagenham, our area takes in Barking (2 miles north-west), Dagenham (2 miles north-east), Becontree (2 miles north), Thames View Estate (2 miles north-west), Becontree Heath (3 miles north) and Chadwell Heath (4 miles north).
What’s near Dagenham Dock
Around Dagenham Dock, we cover homes near Riverside School and the streets around them. The closest station to Dagenham Dock is Dagenham Dock station, roughly 0.5 miles north. Not far away are Scrattons Eco Park.
Bespoke or off-the-shelf?
Standalone TV units cost less and arrive quickly. A stand is also simple to swap when technology moves on, which is a fair point in its favour. Bespoke units are made for one wall and the things you use. A standard unit is the same in every home, whatever the room is like, while fitted furniture is drawn for the room it goes into. It can be painted in a colour chosen for that room.
We quote each job for the room it’s going into, after the design visit. Size, the number of doors and drawers and the internal fittings make the biggest difference to the price.
Why choose Bespoke Carpentry in Dagenham Dock
- Made in moisture-resistant MDF and birch plywood
- Saturday visits and fitting by arrangement
- Every quote follows a design visit
- 300+ projects completed
See our comparison of bespoke and off-the-shelf or how to compare quotes.
Common questions about TV and media units
Can you fit furniture in a home close to Dagenham Dock station?
Yes. We cover all of Barking and Dagenham and the rest of London. To get started, you can get in touch through our contact form with a few details about the room, and let us know about parking and access at the same time.
Can you make TV and media units for a home in Dagenham Dock?
Yes, we work across Barking and Dagenham, Dagenham Dock included, and across the rest of London. To get started, you can use our contact form with a few details.
What happens during the design visit?
It is a chance to measure properly and talk through what you’d like. We look at the walls, floors and anything the furniture has to work around, then send a quote in writing.
Can you build a TV unit for a wall-mounted TV?
The unit can be planned either way. For a wall-mounted TV, the layout works around the bracket position.
How do you get the furniture up the stairs?
Getting it in is planned at the design visit. We measure the stairs, landings, lift and doors, and each section is made to a size that will get through.
What if my walls and floors are out of level?
Uneven walls are normal in older London homes, and the furniture is made to deal with them. We scribe the edges to follow the wall and set the furniture level on adjustable feet or a plinth.
What affects the price in Dagenham Dock
The price reflects the time and materials the job needs. The main factors are:
- Hanging rails, shelves, drawers and other fittings inside
- The overall size of the piece
- Access to the room, such as stairs, lifts and narrow halls
- Spray painting or hand painting
The inside of the furniture affects the price as well: drawers take more making than shelves, and each rail, divider or pull-out adds to the work. We’ll talk through what you need inside at the measuring visit.
Before the design visit
Some details help us understand the job before we visit. When you contact us, it helps to send:
- Approximate measurements of the space
- Photos of the whole wall or room, including the floor and ceiling
- Anything fixed to the wall that the furniture needs to work around
- Where you live, with the postcode
If you know what you want, say so; if you don’t, that is fine, and we can work it out together. The design is talked through at the visit, once we’ve measured, and the written quote that follows sets it out. To start, fill in our short enquiry form.
Nearby places to Dagenham Dock
Other services in Dagenham Dock
Is it time for TV and media units?
The most common reason is a mess of wires. Leads trail from the TV to the boxes, the sockets and the speakers, and no stand ever quite hides them. A built-in unit gives them a planned route.
Requests we hear often include:
- Leads that show from every angle
- Speakers muffled behind doors
- Equipment running hot in a closed cupboard
- A screen at the wrong height
If you live in a period home close to St Martin's Church, the alcoves beside a chimney breast are the natural place for TV and media units.
Choosing a carpenter
- Whether you’ll get a written quote, not just a figure
- Which parts of the job need an electrician or a plumber
- How the furniture will be finished, and where
- Where they’ll park and unload
What happens on fitting day
Before anything is fixed, we set the furniture level. Floors are often out of level, so adjustable feet or a plinth take up the difference, which keeps the lines straight. Only then is it fixed to the wall, with fixings chosen to suit brick, lath and plaster or plasterboard. On fitting day, the sections are assembled, scribed to the walls and levelled. The fixings suit whatever the walls are made of. Saturdays can be arranged.
- You get in touch and list what the unit has to take: the screen, boxes, consoles and speakers.
- We visit to measure up, note where the sockets are and plan how the cables will run. If you need new sockets, your electrician should do that before fitting.
- A written quote follows for the unit.
- The unit is made in our workshop from moisture-resistant MDF and birch plywood, with cable openings and vents cut in.
- The unit is fitted and scribed to the walls, with a spray-painted or hand-painted finish and the routes left clear.
How to prepare
- Move anything in the hall or on the stairs out of the way
- If you live in a block, book the lift and tell the building manager
- Point out meters, boilers and fuse boards near the furniture
Ask for a quote
Every quote follows a design visit. We measure the space, check the walls and floors and discuss what you’d like, then send a written quote. Prices are quoted for your room, once we’ve measured and talked through the design. To book a design visit, get in touch through our contact form.
Read more
How it is made
Moisture-resistant MDF
Moisture-resistant MDF is stable and takes paint well, which suits doors, panels and the visible faces of a TV wall.
Doors and drawer fronts
Drawers suit games, controllers and remotes close to hand. They’re painted in the same colour as the rest.