Barnet · London
Cockfosters Wall Beds
Wall beds in Cockfosters: fold-down wall beds built into fitted cabinets. We visit to measure and go through the design, make the furniture in our workshop and fit it.
- Hiding the bed when it is not in use
- Storage built around a fold-down bed
- A hobby room with a bed for guests
Wall beds for your home in Cockfosters
Looking after your furniture
Looking after painted furniture is simple with a little care. These habits help most:
- Allow space for pillows and duvets
- Check your lease if you live in a flat
- Tell us what the wall is made of if you know
- Treat new paintwork gently at first
Check the mattress stays within the limits the mechanism maker sets, as a heavier one can affect how the bed balances. A new mattress should suit the mechanism too.
Think about the route into the room. We make the cabinet in sections that fit up the stairs and through the doors, so let us know about narrow stairs or a small lift.
Wall beds for homes in Cockfosters
We fit wall beds in Cockfosters and across London. First comes a design visit, where we measure and look at the wall, followed by a quote. We make everything in our workshop and fit it in your home. The time the fitting takes depends on the design and how much storage goes around the bed, and your quote sets out the fitting days. If your home has shelves or a desk around the bed and hiding the bed when it’s not in use, that’s what wall beds are for, made from birch ply and moisture-resistant MDF, painted by hand or sprayed.
Bedrooms in interwar houses often have a picture rail but a plainer ceiling than a Victorian room, which makes it simple to take fitted furniture up to the ceiling. If yours is one of the interwar houses or semis that make up much of the housing around Cockfosters, high cupboards make a good home for suitcases and spare bedding. The skirting is scribed around rather than removed.
Our quotes are written in plain words. They say what will be made, what it’s made from and how it will be finished.
- Location
- Cockfosters (EN4, N14)
- Borough
- Barnet
- Cost
- Quoted for your room
- First step
- Design visit, then a written quote
- Where it is made
- Workshop-made, then fitted
- Materials and finish
- MDF and birch plywood, painted
- Working days
- Weekdays; Saturdays on request
- Enquiries
- The contact form
- Page updated
- 27 October 2026
Common questions about wall beds
I live near New Barnet station. Is that in your area?
Yes, homes across Barnet and the rest of London are within the area we cover. To get started, you can message us from the contact page with a few details about the room.
Is Cockfosters in the area you cover for wall beds?
Yes, Cockfosters is within the area we cover, which takes in all of Barnet and the rest of London. The first step is a design visit, where we measure and discuss the design, followed by a quote.
How are wall beds priced?
Prices are quoted for your room, once we’ve measured and talked through the design. The bed size, the cabinet and any storage around it all make a difference. For a design visit, fill in our short enquiry form.
What space does a fold-down bed take up?
That comes down to the size of the bed. We measure up and make sure the bed has room to fold down.
Do I need permission in a conservation area?
Not usually. Conservation area controls are mostly concerned with the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different: check with the council’s conservation officer first.
What if my walls and floors are out of level?
Uneven walls are normal in older London homes, and the furniture is made to deal with them. We scribe the edges to follow the wall and set the furniture level on adjustable feet or a plinth.
Flats, conversions and lettings
If your flat is leasehold, check your lease before fixing furniture to the walls. Some leases need the building owner’s consent for alterations, and that’s best sorted before fitting day. We can’t give advice on leases.
In a flat, the route in matters as much as the room. We measure the stairs, landings, lift and doorways as well as the room, so each section is sized to get through.
When you need someone else
Damp treatment and building work are for other specialists, so these points are worth knowing:
- Choosing a mattress for you
- Getting consent under your lease
- Making good the walls after other work
If in doubt, you can use our contact form and describe the room before you arrange a visit. How it works.
Materials and parts
- Moisture-resistant MDF
- Spray-painted finish
- Birch plywood
- Shelves or a desk alongside
- Hand-painted finish
- Fold-down bed mechanism
What affects the cost of wall beds
Prices vary from room to room, for these reasons:
- How big the furniture is
- What goes inside: rails, shelves, drawers and dividers
- Tricky walls, sloping ceilings and uneven floors
- Access to the room, such as stairs, lifts and narrow halls
Access to the room makes a difference too. Several flights of stairs, a small lift or a narrow hall can mean smaller sections and more carrying, which the quote allows for. We quote each job for the room it’s going into, after the design visit.
What to send when you contact us
Some details help us understand the job before we visit. It’s useful to include:
- Photos of the whole wall or room, including the floor and ceiling
- Rough measurements, even if they’re only to the nearest few centimetres
- The type of home and how the room is reached
- Radiators, sockets, pipes or meters on or near the wall
The quote is built from the design visit. We take full measurements, see how true the walls and floors are and work through the design together. Afterwards, we send a written quote. To book one, message us from the contact page.
Nearby places to Cockfosters
What else we make in Cockfosters
Fitted bedroom furniture in Cockfosters
About 31% of the homes in the neighbourhood around Cockfosters went up between 1945 and 1972, and about 30% between 1919 and 1939, based on the Valuation Office Agency’s 2025 council tax data. That matters for wall beds, as the build era decides whether a wall is solid brick, lath and plaster, block or plasterboard. The centre of Cockfosters is within about a quarter of a mile of the Monken Hadley Conservation Area. Planning controls in conservation areas are mainly concerned with the outside of buildings, so fitting furniture inside a house doesn’t normally need permission. If you want to be certain, ask the council’s planning team. Controlled parking zones are common across London, and Barnet sets its own rules. Depending on your street in Cockfosters, a visitor permit, a paid bay or a council bay suspension may be needed. We ask about parking at the design visit, so we can plan the day around it.
If your home is as old as some of the listed buildings nearby, such as Front Lodge at Trent Park, original features like shutters, panelling and fireplaces are worth designing around. For a listed home, fixing into original features can need listed building consent. If you live near Belmont Open Space, keeping wall beds off the window wall keeps the room bright. If your children go to Trent CofE Primary School or a school nearby, the inside of wall beds can be laid out with adjustable shelves, so the space keeps up as children grow.
Cockfosters is about 4 miles south of Finchley, in the London Borough of Barnet. Our work covers every London borough and the City of London, Cockfosters included. Our Barnet coverage includes Cockfosters, along with the rest of the borough.
Every home in EN4 and N14 is covered for wall beds. Our area takes in homes on streets such as Park Road, Grove Road and Bevan Road, whether you want wall beds or another piece made for the room. Cockfosters is near the A111; on busy main roads, unloading wall beds takes a little planning. Neighbouring places we cover for wall beds include New Barnet (1 mile south-west), Hadley Wood (1 mile north-west), East Barnet (1 mile south), Oakwood (1 mile south-east) and Osidge (1 mile south-east). We also make wall beds in nearby places like Finchley (4 miles south), Burnt Oak (5 miles south-west), East Finchley (4 miles south), Hendon (6 miles south-west), Whetstone (2 miles south) and Edgware (5 miles south-west).
Local landmarks in Cockfosters
The streets we cover here include those near JCoSS, The Cock Inn and Trent School Cockfosters and the streets around them. Cockfosters’s nearest station is New Barnet station, about 0.8 miles west of the centre. Well-known places in the area include Spires Shopping Centre (2 miles west). Not far away are Covert Way.
How fitting day works
If anything comes up on the day, just ask. The design, materials and finish were settled before anything was made, so the day itself is about careful fitting and leaving everything tidy. The time the fitting takes depends on the size of the bed and the cabinets around it, and your quote sets out the fitting days. Semis and detached houses often have a front path or a side gate, which can make carrying in easier. We measure the path, any steps and the front door as part of the route. Floors are covered from the door to the room.
- We start with what the room is for, day and night.
- We visit, measure up and check the wall the bed will fix to.
- We send a quote setting out the design, materials and finish, for you to look over.
- The bed cabinet and any shelves or desk are made at our workshop, from moisture-resistant MDF and birch plywood.
- We fit everything in your home and check the bed lowers and lifts smoothly.
Before we arrive
- Leave a clear route from the front door to the room
- Tell us about parking near your home
- Keep pets out of the room and the hallway
Arranging a design visit
You do not need exact measurements to get started. Everything is measured properly when we visit. To get started, send us a few details through our contact form and tell us about the room. The written quote follows the visit.