Bexley · London
Crook Log Wall Beds
Wall beds in Crook Log: fold-down wall beds built into fitted cabinets. We make each piece in our workshop and fit it in your home.
- A guest bed that disappears in the day
- Storage built around a fold-down bed
- A home office that also sleeps guests
Ask about wall beds in Crook Log
Wall beds for homes in Crook Log
The biggest shares of homes in the neighbourhood around Crook Log were built between 1919 and 1939 (about 49%) and between 1945 and 1972 (about 18%), in the VOA’s 2025 council tax stock figures. For carpentry, the era of a house is a useful clue to how square its rooms are and what its walls are made of. There are 10 entries on the National Heritage List within half a mile of the centre of Crook Log. You can check whether a particular building is listed on Historic England’s list. About 49% of homes in the area around Crook Log date from between 1919 and 1939, according to Valuation Office Agency council tax figures (2025). Houses from that era often have a box room over the stairs, with a raised bulkhead in the floor, which suits fitted storage made around its bulkhead.
For a flat near Bexleyheath station, wall beds are made in sections sized for the stairs, landings and lift, so measuring the route matters as much as measuring the room. Near listed buildings like Red House, under half a mile south-east of the centre of Crook Log, older homes may keep original joinery that wall beds can be designed around. If your own home is listed, check with the council before fixing into original features. If you live in a period home close to Trinity Baptist Church, tall ceilings give wall beds room to reach the cornice.
Crook Log is part of the London Borough of Bexley, about 2 miles south-west of Sidcup. Our work covers every London borough and the City of London, Crook Log included. We cover places right across Bexley, large and small.
Design visits and fitting in DA7, DA6 and DA16 work the same way as everywhere else we cover. You will find streets here such as Bean Road, Lion Road and Alers Road, and homes on each of them are within our area for wall beds. Close by, we also work in Upton (1 mile east), Bexleyheath (1 mile east), Welling (1 mile west), Blendon (1 mile south) and Bexley (1 mile south). Across the rest of Bexley, our area takes in Sidcup (2 miles south-west), Erith (2 miles north-east), Belvedere (2 miles north-east), Northumberland Heath (2 miles north-east), Lessness Heath (2 miles north-east) and Albany Park (2 miles south-west).
Local landmarks in Crook Log
The streets we cover here include those near St Columba's Catholic Boys' School, Bexleyheath Academy and The Crook Log Public House and the streets around them. There is a railway station in Crook Log itself: Bexleyheath station. Other landmarks nearby include Broadway Shopping Centre (0.9 miles east) and Bexley Museum (1.7 miles south-east).
Wall beds in Crook Log: what you get
In a studio flat, a wall bed can make the main room feel much larger. During the day, the room is somewhere to sit, work and eat, and at night it becomes a bedroom. Storage and shelving can go on either side or above to make the most of the wall. We make wall beds from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and people most often get in touch about more floor space in a studio flat and a flexible room for a growing family.
Around Crook Log, with interwar houses or semis making up much of the housing, the third bedroom is often small, sitting over the stairs. That is where wall beds earn their place, making a small room work as a dressing room, a guest room or both. Nothing is assumed: the room is measured wall by wall.
Once you have read the quote and decided to go ahead, the furniture is made at our workshop. The quote sets out the agreed design, materials and finish, so every detail can be checked first.
- Place
- Crook Log (DA7, DA6, DA16)
- Area
- Bexley
- Prices
- Quoted for your room
- To begin
- We visit, measure, then quote
- Made
- Made in our workshop and fitted on site
- Materials and finish
- MDF and plywood, painted to order
- Working days
- Weekdays; Saturdays on request
- Enquiries
- Our contact form
- Updated
- 27 October 2026
Bespoke or off-the-shelf?
Standard units come in set widths and heights, so there’s often a strip of wasted space at the side or above. Fitted furniture is made to the room’s measurements, so it can run to the ceiling and fill the width.
Shop-bought shelves can sag over a long span. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. We design shelves with that in mind.
Questions from Crook Log
I live near Bexleyheath station. Is that in your area?
Yes. We cover all of Bexley and the rest of London. You can message us from the contact page to arrange a design visit.
Can parking be tricky on fitting day in Crook Log?
It can be, depending on whether your street is in a controlled parking zone. Depending on the street, a visitor permit, a paid bay or a bay suspension through the council may be needed, and suspensions often need notice. Let us know what parking is near you at the design visit.
How much room do I need in front of a wall bed?
It depends on the bed size and the mechanism. At the design visit we measure the room and check there is enough space in front.
Do you do the electrics?
No. Sockets, switches and lighting are for your electrician, and some electrical work in homes is covered by Part P of the Building Regulations. We’ll design around them.
Is an outside wall a problem for fitted furniture?
External walls can be colder and damper than internal ones, so ventilation behind and inside the furniture helps to avoid condensation. If there’s damp, it should be sorted before anything is fitted.
Does someone need to be home during the fitting?
Someone needs to let us in at the start of the day. It also helps to have someone around at the end, so we can go over the finished furniture together.
Flats, leases and landlords
Mansion blocks and purpose-built blocks often have house rules about lifts, entry systems and when trades can come in. Let us know about them at the design visit.
Leaseholders should check the lease before anything is fixed to the walls. A lease can require consent from the building owner for alterations, which is worth sorting early. We can’t advise on your lease, so check it yourself or ask your managing agent.
Also near Crook Log
More for homes in Crook Log
Boards, parts and paint
Bed mechanism housing
We build the housing to suit the mechanism and fix it as the maker specifies. The front can look like a set of cupboards.
Spray-painted finish
Spray painting suits a cabinet you want to look crisp, and it’s done before fitting.
Made for the room, or bought in a box?
Standard units seldom reach the ceiling or fit wall to wall. We can build to the full height and width and fill the rest of the wall with storage. Standard widths rarely add up to the length of a real wall, so fitted furniture is made to the wall’s own length. It can use the full height too.
In London, parking can affect the price. Much of London is covered by controlled parking zones, so we may need a visitor permit, a paid bay or a suspended bay. Let us know about parking during the design visit.
Why choose Bespoke Carpentry in Crook Log
- Fitted tight to walls that are not straight
- Made in our workshop, then fitted in your home
- Designed for the room you have
- Work across the whole of London
Take a look at how bespoke compares with ready-made or what a quote should include.
How fitting day works
When we arrive on fitting day, we start by protecting your floors and the route from the front door to the room. The sections made in our workshop come in next, one at a time. How long fitting takes depends on the size of the bed and the cabinets around it, and the fitting days are agreed in your quote. Clearing the room and the way in beforehand helps the day run well. Fitting day starts with protecting the floors and setting out the pieces. Each piece is levelled, scribed where the wall wanders and fixed to suit the wall.
- To begin, message us from the contact page; a brief note on the room and how often guests stay is plenty.
- We visit to measure up, look at the wall and floor and make sure there is clear space in front to lower the bed.
- You receive a written quote for the wall bed and any storage.
- The bed housing and any shelves or desk are made in our workshop from moisture-resistant MDF and birch plywood.
- We fit the cabinet in your home and fix the mechanism as its maker specifies.
- We go through the bed with you; the cabinet has the spray-painted or hand-painted finish you chose.
How to prepare
- Let us know about any meters, fuse boards or boilers in the area
- Clear the area where the furniture is going
- Check the building’s rules for trades and lift bookings
Arranging a design visit
It helps to see the room before we come. A few pictures showing the walls, the corners and where the ceiling meets them tell us a lot about the space, particularly with rough sizes. To share them, tell us about the room on our contact form, and we’ll suggest a time for a design visit.