Barnet · London
Wall beds in Mill Hill, Barnet
Walls in older London homes are rarely straight, so we scribe the furniture to follow them. Our work on wall beds in Mill Hill starts with a design visit, and everything is built in our workshop.
- More floor space in a studio flat
- A proper bed instead of a sofa bed
- A storage wall with a bed inside
Wall beds in Mill Hill
Is bespoke worth it?
Sofa beds cost less and need no fixing, which suits some homes. A wall bed takes a proper mattress and gives back the floor, which matters in a small room. Doors, windows and radiators rarely leave a gap that matches a standard width, which leaves ready-made pieces sitting awkwardly. Fitted furniture is designed around them.
How it is painted is part of the price: spray painting happens in the workshop, and hand painting can be done in your home. The written quote reflects your choice, along with the size and fittings.
What you get with us
- Every quote follows a design visit
- Saturdays by prior arrangement
- Made in our workshop, then fitted in your home
- A spray or hand-painted finish
See how bespoke compares with ready-made and what to look for in a quote.
How we make wall beds for Mill Hill
The bed mechanism must be fixed securely, exactly as its maker specifies, to a wall and floor that can take the load. At the design visit we look at the wall it will go on as solid brick, stud walls and plasterboard all need different fixings. We make wall beds from moisture-resistant MDF and birch plywood, spray-painted or hand-painted, and the usual reasons to get in touch are a flexible room for a growing family and a studio that works by day and night.
A good part of the housing around Mill Hill is interwar, semi-detached or detached. Many 1930s houses have a small box room over the stairs, often with a raised bulkhead in the floor, and the bulkhead is built around rather than ignored. The main bedroom may have a bay at the front and a chimney breast on the side wall.
Everything we agree at the design visit goes into the written quote: the layout, what goes inside, the materials used and the finish. If you’d like to change anything, it is easier before the furniture is made.
- Place
- Mill Hill (NW7, N20)
- Area
- Barnet
- Price
- Quoted for your room
- To begin
- We visit, measure, then quote
- Making
- Workshop-made, then fitted
- Boards and paint
- MDF and birch plywood, painted
- Working days
- Monday to Friday; Saturdays by prior arrangement
- Enquiries
- The contact form
- Page updated
- 27 October 2026
Your questions about wall beds in Mill Hill
Do you make wall beds for homes in Mill Hill?
Yes, Mill Hill is within the area we cover, which takes in all of Barnet and the rest of London. We start with a design visit to measure the room and talk through what you need, followed by a quote.
Will a conservation area stop me having wall beds fitted in Mill Hill?
Not normally. Conservation area controls are mainly about the outside of buildings, so fitted furniture inside a house does not normally need planning permission. If your home is listed, changes inside that alter its character can need listed building consent, so check with the council first. If you’re unsure, the council can confirm.
Is a mattress included with the wall bed?
The mattress needs to suit the mechanism by size, depth and weight. We’ll go through those limits at the measuring visit so you can choose one that works.
Do you move sockets or add lighting?
No. We’re carpenters, so electrical work is for your electrician. We can plan cable routes into the design, and new sockets should be in place before fitting day.
How much room do I need in front of a wall bed?
That varies with the size of the bed. We measure up and make sure the bed has room to fold down.
What happens during the design visit?
We measure the space and discuss the design, materials and finish. We also check the walls and floors and note radiators, sockets and other things in the way, then send a quote in writing.
How fitting day works
Getting everything level comes first. Floors are often out of level, so adjustable feet or a plinth take up the difference. After that, it is fixed to the wall using fixings that suit the wall, whether that is solid brick, lath and plaster or plasterboard. Loft stairs in an interwar house can be tight, with a low ceiling at the top, so any section going up there is sized for them. Elsewhere in the house, the route is usually more generous. The pieces are joined and fixed once in place.
- You contact us about a wall bed for a spare room or studio.
- At the design visit we plan the bed cabinet and check the stairs, landings and any lift.
- Your written quote sets out the design, materials and finish.
- In our workshop we build the bed cabinet in sections from moisture-resistant MDF and birch plywood.
- The cabinet is joined in the room, fixed securely and set level.
How to prepare
- Take anything hanging off the wall we are fitting to
- Let us know if your street is in a controlled parking zone
- Clear the area where the furniture is going
Arranging a design visit
Prices are quoted for your room, once we’ve measured and talked through the design. Each room is different, so we quote after seeing it, when we have measured up and talked through the design. For a quote, drop us a line using the contact form.
Related advice
When you need someone else
As carpenters, we leave some work to other trades. It is useful to know these before you plan the job:
- Plastering or decorating the room
- Getting consent under your lease
- Building work to make a wall sound
If you’re not sure what’s possible in your room, you can message us from the contact page and we’ll give you a straight answer before you arrange a visit. Our process from visit to fitting.
What goes into it
- Birch plywood
- Fold-down bed mechanism
- Hand-painted finish
- Shelves or a desk alongside
- Spray-painted finish
- Moisture-resistant MDF
Mill Hill homes and wall beds
The biggest shares of homes in the neighbourhood around Mill Hill were built between 1919 and 1939 (about 43%) and before 1919 (about 21%), according to Valuation Office Agency council tax figures (2025). We take that into account at the design visit, since older and newer walls take different fixings. Mill Hill is partly covered by the Mill Hill Conservation Area, one of the conservation areas recorded by Historic England. Conservation area controls are mainly about the outside of buildings, and fitted furniture inside a house doesn’t normally need planning permission. If in doubt, the council’s planning team can confirm. About 54% of households in the streets around Mill Hill live in detached or semi-detached houses, in the ONS Census 2021 figures. A house like that normally has more rooms to plan around than a flat, and sometimes a driveway that makes unloading easier.
Near listed buildings like Holcombe House, under half a mile north-west of the centre of Mill Hill, older homes may keep original joinery that wall beds can be designed around. If your own home is listed, check with the council before fixing into original features. Close to Bittacy Hill Park? A bedroom facing the green is best kept light, with the furniture on the side walls. For a family home near St Paul's CofE Primary School NW7, the inside of wall beds can be laid out with adjustable shelves, so the space keeps up as children grow.
Mill Hill is part of the London Borough of Barnet, about 2 miles south-east of Finchley. Anywhere in Mill Hill, it works the same way: a design visit, a written quote, furniture built in our workshop and fitting in your home. We list Mill Hill among 41 places we cover in Barnet.
Every home in NW7 and N20 is covered for wall beds. We cover homes on streets like Daws Lane, Byron Road and High Street, whether you want wall beds or another piece made for the room. Other places close to Mill Hill include The Hale (1 mile west), Burnt Oak (1 mile south-west), Grahame Park (1 mile south), Totteridge (2 miles north-east) and Edgware (2 miles west). Elsewhere in Barnet, we also cover Finchley (2 miles south-east), Barnet (3 miles north-east), East Finchley (3 miles south-east), Hendon (2 miles south), Whetstone (3 miles east) and Friern Barnet (3 miles east).
Near you in Mill Hill
Our area takes in the homes around Francis Skaryna Belarusian Library and Museum, Mill Hill School and Rising Sun pub and the streets around them. The closest station to Mill Hill is Mill Hill Broadway station, about 1 mile south-west. Well-known places in the area include Francis Skaryna Belarusian Library and Museum (2 miles east) and Edgware Community Hospital (2 miles south-west). Not far away are The Mill Field and Darland's Lake.
What affects the price in Mill Hill
When we put a quote together, we consider:
- Walls and floors that are out of level or out of square
- Stairs, lifts and the route to the room
- The overall size of the piece
- Doors and drawers, and how many
Prices are quoted for your room, once we’ve measured and talked through the design. The price depends mainly on the size of the piece, how many doors and drawers it has and what goes inside.
Before the design visit
These details help when you get in touch:
- Pictures showing the full wall, from floor to ceiling
- Your postcode and the borough
- What you’d like to store or use the space for
- Rough sizes: width, height and depth
To get a quote for wall beds in Mill Hill, use our contact form. Let us know the room and the rough idea, plus any rough measurements. We will arrange a design visit, then send a written quote.
Flats, conversions and lettings
In a managed block, the building manager or concierge may need notice before we arrive. Lifts sometimes need to be booked, and the lift size helps decide how big each section can be. Mention it when you contact us.
In a flat, the route in matters as much as the room. We measure the stairs, landings, lift and doorways as well as the room, so each section is sized to get through without a struggle.