Example photo by Franco Debartolo on Unsplash, not our project
Hounslow · London
Window seats in Gillette Corner, Hounslow
Window seats for your home in Gillette Corner: window seats for bays and under sash windows, with storage inside. We visit to measure and discuss the design, make the furniture in our workshop and fit it.
- A bay window that is hard to furnish
- A sash window with space beneath it going to waste
- Wanting a seat without blocking the radiator
Ask about window seats in Gillette Corner
Window seats for homes in Gillette Corner
A well-made window seat gives you a place to sit in the best light in the room. Our window seats are made for bays, sash windows and the recesses beside them, often with storage underneath behind a lift-up lid or drawers. For a home in Gillette Corner, it starts with a design visit to measure the window and discuss the design. People usually come to us about a ready-made bench that doesn’t fit the bay and unused space below a sash window, and the answer is made in our workshop from birch ply and moisture-resistant MDF, painted by hand or sprayed.
Around Gillette Corner, interwar houses or semi-detached and detached homes make up a good part of the housing. If yours is a 1920s or 1930s house, the bay window at the front, the space under the stairs and the box room are the usual places to gain storage. Any meters or fuse board under the stairs stay accessible, and the storage is planned around them.
We write quotes in plain English, without jargon. You’ll see what will be made, the boards used and the finish.
- Place
- Gillette Corner (TW7, TW8)
- Area
- Hounslow
- Prices
- Quoted for your room
- To begin
- A design visit: we measure and talk it through
- Where it’s made
- Made in our workshop and fitted on site
- Made from
- MDF and plywood, painted to order
- Working days
- Weekdays; Saturdays on request
- Contact
- The contact form
- Last updated
- 27 October 2026
Bespoke or off-the-shelf?
A ready-made bench is built for a flat wall and a square corner, but bays have angled sides and walls that are rarely flat. In a bay, a standard bench leaves tricky gaps. A bespoke seat follows the shape of the bay. It’s a bigger investment, and the gain is a seat that fits the space. In an extended or opened-up house, old and new walls often meet slightly out of line, and straight-sided ready-made units make that obvious. Fitted pieces are scribed to both.
The inside of the furniture affects the price as well: rails, shelves, drawers and dividers all add work. At the design visit, we work out what you need inside.
Why choose us
- More than 300 projects completed
- Made in our workshop, then fitted in your home
- Made for your room, not a standard size
- Every London borough and the City of London covered
Read our comparison of bespoke and off-the-shelf and how to compare quotes.
How fitting day works
Furniture made in a workshop still has to meet the room it is going into, and that happens on fitting day. Walls in older homes are rarely flat or square, so each edge that meets a wall is scribed to follow it, closing the gaps a standard unit would leave. How long the fitting itself takes depends on the size of the window and the design, and the fitting days are agreed in your quote. Fitting day means carrying in the sections, joining them and fitting them to the walls. Spray-painted pieces come finished from the workshop, while hand painting can happen on site. Saturdays can be arranged.
- You get in touch and let us know about the window and the room, including any radiator under it.
- We visit to measure the window and talk through the design. We also talk about lift-up lids or drawers.
- You receive a quote in writing for the seat we have discussed.
- Your window seat is built in our workshop, shaped to the window.
- We fit it in your home, scribed to the walls and the floor. Any radiator grille is fitted so heat can still reach the room.
Before fitting day
- Make sure pets are kept safely away
- Get any new sockets or wiring done by your electrician before fitting day
- Mention any parking restrictions on your street
Getting a quote
For a quote for window seats in Gillette Corner, drop us a line using the contact form. Tell us which room it is and roughly what you have in mind, with sizes if you have them. Next comes a design visit, followed by a written quote.
Read more
Places near Gillette Corner
More for homes in Gillette Corner
The problems window seats solve
Storage is another big reason. A seat with a lift-up lid or drawers can hold toys, blankets, books or games. It adds storage without taking up more of the floor.
These come up often when people first get in touch:
- A ready-made bench that does not fit the bay
- Unused space below a sash window
- Wanting a seat without blocking the radiator
- A bay window that’s hard to furnish
If you live near Boston Manor Park, window seats can be designed to hold outdoor kit, from walking boots to picnic things.
Before you hire any carpenter
- Who does any electrics, plumbing or gas work
- How parking will work on your street
- Whether you’ll get a quote in writing, not just a figure
- Can you see real work of theirs?
Window seats in Gillette Corner: local notes
The biggest shares of homes in the area around Gillette Corner were built between 1919 and 1939 (about 51%) and since 2000 (about 20%), going by the Valuation Office Agency’s 2025 council tax figures. Each era brings its own kind of wall, ceiling height and floor, so it shapes the design from the first measurement. Within a mile of the centre of Gillette Corner, 5 conservation areas are recorded by Historic England. Historic England says England has around 10,000, and the controls mainly cover the outside of buildings, so fitted furniture inside a house does not normally need planning permission. About 50% of households in the neighbourhood around Gillette Corner live in detached or semi-detached houses, in the ONS Census 2021 figures. In a semi or detached house, a driveway, where there is one, can make unloading easier.
For a family home near Marlborough Primary School, a place for each person’s coat and shoes stops the hallway filling up. For an older house near St Mary's Church, a radiator under the window just needs a grille in the seat front.
Gillette Corner is about 2 miles south-west of Hounslow, part of the London Borough of Hounslow. Gillette Corner is part of the area we cover, and the process is the same everywhere we work. Gillette Corner is one of the places in Hounslow where we make window seats, and the borough has 25 places on our list.
Here we cover the TW7 and TW8 postcode area for window seats. If your home is on a street like Wood Lane, Syon Lane and Darcy Road, or close by, we can arrange a design visit for window seats. Neighbouring places we cover for window seats include Brentford End (1 mile east), Spring Grove (1 mile west), Isleworth (1 mile south), Osterley (1 mile west) and Brentford (1 mile east). We also make window seats in nearby places such as Hounslow (2 miles south-west), Feltham (5 miles south-west), Chiswick (3 miles east), Strand-on-the-Green (2 miles east), Lampton (2 miles south-west) and Gunnersbury (2 miles east).
Local landmarks in Gillette Corner
Our area takes in the homes around Coach and Horses pub and The Green School, among other places. There’s a railway station in Gillette Corner itself: Syon Lane station. Other landmarks nearby include Treaty Centre (1.9 miles south-west) and Musical Museum (1.5 miles east). Not far away are Long Wood and Garden Lake.
What it’s made from
Spray-painted finish
Spray painting gives the seat a very even surface. We apply it in our workshop, and the paint needs time to cure fully once fitted.
Lift-up lids
With a lift-up lid, the whole space beneath the seat opens up. It suits blankets, toys and things you do not need every day. We make the lid to open and close cleanly.
Questions from Gillette Corner
I live near Syon Lane station. Is that in your area?
Yes, homes across Hounslow and the rest of London are within the area we cover. To get started, you can get in touch through our contact form with some details about the room, and tell us about parking and access at the same time.
Is parking a problem for fitting in Gillette Corner?
It can be, depending on whether your street is in a controlled parking zone. A van may need a visitor’s permit, a paid parking bay or a bay suspension, which the council arranges, often with notice. It is useful to let us know about parking at the design visit.
Is an outside wall a problem for fitted furniture?
It needs a little planning: leaving ventilation behind and inside helps stop condensation. We don’t treat damp, so any damp should be sorted before fitting day.
Who chooses the colour?
You choose it. Spray and hand-painted finishes both use the colour you have chosen.
Can the fitting be on a Saturday?
Yes, by arrangement. Let us know when you get in touch if a Saturday suits you best.
Is a lid or drawers better for a window seat?
Many seats use both. Drawers are easier for daily use, and a lid section holds larger things. In a child’s room, drawers tend to be simpler for small hands. We will suggest a layout at the design visit.
When you need someone else
Damp treatment and building work are for other specialists, and there are a few other limits too:
- Fabric covers and cushions
- Repairs to sash windows, cills or shutters
- Painting the walls of the bay
If you’re not sure what’s possible in your room, you can use our contact form and we will give you a straight answer. Our process from visit to fitting.
What it’s made from
- Birch plywood
- Spray-painted finish
- Moisture-resistant MDF
- Radiator grilles
- Hand-painted finish
- Lift-up lids or drawers