Bespoke fitted furniture across all 32 London boroughs and the City

Example photo by Franco Debartolo on Unsplash, not our project

Croydon · London

Window Seats in Kenley

For homes in Kenley, we make window seats from moisture-resistant MDF and birch plywood. Each piece is finished by spray or by hand, in the colour you choose.

  • Unused space below a sash window
  • A ready-made bench that doesn’t fit the bay
  • Wanting new furniture to sit well in an older room

Window seats in Kenley

About our window seats in Kenley

A well-made window seat gives you a place to sit in the best light in the room. We design and make window seats for bays, sash windows and recesses, typically with storage below, under a lift-up lid or in drawers. For a home in Kenley, it starts with a design visit to measure the window and discuss the design. We make window seats from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted, and people most often get in touch about no space for toys and games and a child’s room that needs storage and seating.

Around Kenley, interwar houses or semi-detached and detached homes make up a good part of the housing. If yours is a 1920s or 1930s house, the bay window at the front, the space under the stairs and the box room are the usual places to gain storage. Any meters or fuse board under the stairs stay accessible, and the storage is planned around them.

If the job needs another trade, like an electrician or a plumber, we will tell you. The quote itself covers our work, from the design to the materials and finish.

Illustration of a window seat under a sash window with shelves either side
Where
Kenley (CR8, CR2)
Borough
Croydon
Prices
Quoted for your room
To begin
We visit, measure, then quote
Made
Workshop-made, then fitted
Materials and finish
MDF and birch plywood, painted
Working days
Weekdays, and Saturdays by prior arrangement
Enquiries
Our contact form
Page updated
27 October 2026

Storage in Kenley homes: local notes

In the neighbourhood around Kenley, the largest groups of homes date from between 1919 and 1939 (about 32%) and between 1945 and 1972 (about 31%), going by the Valuation Office Agency’s 2025 council tax figures. We take that into account at the measuring visit, since older and newer walls take different fixings. Entries on the National Heritage List near the centre of Kenley include Church of All Saints (Grade II), less than half a mile south-west, and Kenley Station House (original 1856 Building) (Grade II), less than half a mile west. Where a home is listed, listed building consent can be needed for inside works that affect its character, like fixing into original panelling. The council’s conservation officer is the person to ask before work starts. Detached and semi-detached houses are home to about 66% of households in the streets around Kenley, in the ONS Census 2021 figures. In a semi or detached house, a driveway, where there is one, can make unloading easier.

For a family home near Harris Primary Academy Kenley, window seats can give school bags, shoes and sports kit a proper home. Close to Dollypers Hill? Living near green space often means muddy boots, bikes and outdoor kit, and window seats can give those things a place.

Kenley is about 5 miles north of Thornton Heath, in the London Borough of Croydon. Kenley is part of the area we cover. In Croydon, Kenley is one of the places we cover.

We work across the CR8 and CR2 postcode area. You will find streets here such as Oaks Road, Park Road and Roke Road, and homes on each of them are within our area for window seats. The A22 run close to Kenley, so if your home is on a main road, mention it when you contact us. We also cover the places around Kenley: Riddlesdown (1 mile north), Sanderstead (1 mile north-east) and South Croydon (2 miles north). Across the rest of Croydon, our area takes in Thornton Heath (5 miles north), Croydon (3 miles north), Coulsdon (2 miles west), Broad Green (4 miles north), Upper Norwood (7 miles north) and Selhurst (5 miles north).

What’s near Kenley

In Kenley, that includes homes near Riddlesdown Collegiate and the streets around them. There is a railway station in Kenley itself: Kenley station. Other landmarks nearby include Purley War Memorial Hospital (1.3 miles north-west). Open spaces near Kenley include Foxley Wood.

Map of Kenley © OpenStreetMap contributors

What happens on fitting day

With the carcasses fixed and level, any doors go on and any drawers or lids are fitted. We adjust each one so the gaps line up and it closes cleanly, then checked again. How long the fitting takes depends on whether the seat has drawers, a lift-up lid or a radiator grille, and the fitting days are agreed in your quote. In a 1930s house with a converted loft, the stairs to the loft room are often steeper than the main flight, so any section going up there is sized for them. The main stairs in houses of that age are typically straighter. The pieces are joined and fixed once in place.

  1. To begin, fill in our short enquiry form; a brief note on the bay or sash window is enough.
  2. At the design visit we measure the window and the radiator, and plan a grille or open front so heat is not trapped.
  3. A written quote follows, covering the seat and the grille.
  4. In our workshop the seat is built from moisture-resistant MDF and birch plywood, with the grille made to match.
  5. We fit it in your home and scribe it to the walls, with the finish sprayed beforehand or painted by hand on site.

Preparing the room

  • Move furniture and belongings away from the wall
  • Keep pets in another room while we work
  • Let us know where the boiler and meters are

Getting a quote

Getting a quote starts with some details: which room it is, rough sizes and a couple of pictures if you can take them. To send them, fill in our short enquiry form. After that, we arrange a visit to measure and discuss the design, then send a written quote.

Arrange a design visit

Advice

Caring for painted furniture

New paint needs time to cure fully, so go gently with it for a while. Beyond that, these tips help:

  • Consider how often you will reach for what’s stored
  • Think about the cushion you’d like and who will make it
  • Mention any parking rules on your street
  • Choose a colour that suits the room

A soft, damp cloth is the best way to keep the seat clean. Dry it afterwards, and avoid abrasive pads and strong solvents. The front edge of the seat is touched most, so give it a wipe now and then.

Condensation on the glass can drip onto the cill and the seat, so wipe it away. A little fresh air helps reduce condensation. Don’t leave water sitting on the painted surface.

Flats, blocks and rented homes

In a flat, the route in matters as much as the room. At the design visit, we measure the stairs, the landings, any lift and the doors, so the furniture can be made in sections that fit through.

In conversions and newer blocks, many internal walls are timber or metal stud with plasterboard. We choose fixings to suit the wall, which we check at the measuring visit.

FAQs: window seats in Kenley

Do you make window seats for homes in Kenley?

Yes, Kenley is within the area we cover, which takes in all of Croydon and the rest of London. The first step is a design visit, where we measure and talk through the design, followed by a quote.

Do you cover homes near Kenley station?

Yes. We cover all of Croydon and the rest of London. To get started, you can fill in our short enquiry form with a few details about the room.

Should I send photos?

Yes. They give us a feel for the space before we visit, along with rough sizes. Show anything the furniture has to work around, like radiators or sockets.

Can you add sockets inside the units?

No. Sockets, switches and lighting are for your electrician. We plan the furniture around where they’ll go.

How is a window seat priced?

Every piece is quoted for your room after the design visit. The shape of the window, the mix of drawers and lids, and any grille all play a part. Everything is set out in a quote in writing after the visit.

What materials do you use for window seats?

Our window seats are made from moisture-resistant MDF and birch plywood, then painted. A moisture-resistant grade suits a spot by a window, where condensation can form. Your quote confirms the materials and finish.

Why people ask for window seats in Kenley

The most common reason is wanting to make more of a bay or window. Bays are hard to furnish, and a built-in seat makes good use of them. It becomes a place to sit, read or look out.

A few of the things people ask us to solve include:

  • A child’s room that needs storage and seating
  • A bay window that’s hard to furnish
  • Wanting a quiet place to read
  • Wanting new furniture to sit well in an older room

If you live in a flat close to Kenley station, the lift, the stair turns and the front door all set the largest piece that can come in.

Before you hire any carpenter

  • Whether they can show you real projects they’ve done
  • How parking will work on your street
  • Have they measured the stairs, lift and doorways?
  • How they handle walls that are not straight

How to choose a carpenter in London

What affects the cost of window seats

When we put a quote together, we consider:

  • How many doors and drawers there are
  • Where a van can park, such as a permit bay or a bay suspension
  • The finish: spray painted or hand painted
  • What goes inside: rails, shelves, drawers and dividers

Getting to the room affects the job as well. Narrow halls, tight stairs or a small lift may mean the furniture is made in more sections, which the quote allows for. Prices are quoted for your room, once we’ve measured and talked through the design.

Helping us understand the room

You do not need exact measurements or a plan. It’s enough to send:

  • How you want to use the space
  • Anything fixed to the wall that the furniture needs to work around
  • Photos of the whole wall or room, including the floor and ceiling
  • Where you live, with the postcode

It is useful to see the room before we come. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space. To send them over, drop us a line using the contact form, and we’ll arrange a design visit.

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City