Example photo by Franco Debartolo on Unsplash, not our project
Harrow · London
Pinner Window Seats
Window seats for bays and under sash windows, with storage inside, for homes in Pinner. We make each piece in our workshop and fit it in your home.
- Wanting new furniture to sit well in an older room
- No space for toys and games
- A bay window that’s hard to furnish
Window seats for your home in Pinner
Boards, parts and paint
Doors and drawer fronts
Where there is a radiator, part of the front is a grille. It’s finished like the rest of the seat. The rest of the front can be drawers, doors or plain panels.
Pull-out drawers
A seat can have drawers along its whole length, or drawers with a lid section. Around a radiator, the drawers are placed to leave room for the heat. We agree the layout at the measuring visit.
Window seats in Pinner: what you get
Sash windows are a feature of many older London homes. Under a sash, the seat is set below the cill so the window can still be used. If the window has shutters, the seat is planned so they can still open fully. These details are measured when we visit your home in Pinner. Typical reasons to get in touch are needing more storage in the room and a sash window with space beneath it going to waste, and the answer is built in our workshop from birch plywood and moisture-resistant MDF with a spray-painted or hand-painted finish.
An interwar house typically has a proper landing, sometimes with a recess or an airing cupboard, and that space can take shallow fitted storage. If yours is one of the interwar houses, semis or detached homes that make up much of the housing around Pinner, the landing is worth a look as well as the hall. If a boiler or cylinder sits there, it keeps its clearances and access.
A quote in writing is the clearest record of what we’ve agreed. It describes the window seat we have designed for the room, what it’s made from and how it’s finished.
- Where
- Pinner (HA5)
- Area
- Harrow
- Prices
- Quoted for your room
- How it starts
- A design visit: we measure and talk it through
- Making
- Made in our workshop and fitted on site
- Materials and finish
- Painted MDF and birch ply
- When we fit
- Weekdays, and Saturdays by arrangement
- Enquiries
- Send us a message
- Updated
- 27 October 2026
When you need someone else
Our work is the furniture itself: designing it, making it in our workshop and fitting it. In practice, that means:
- Plastering and decorating around the seat
- New sockets or lights near the window, which are for your electrician
- Fabric covers and cushions
Not sure whether your space suits window seats? You can message us from the contact page and we will tell you before you arrange a visit. Our process from visit to fitting.
Boards, parts and finishes
- Birch plywood
- Moisture-resistant MDF
- Lift-up lids or drawers
- Radiator grilles
- Spray-painted finish
- Hand-painted finish
Your questions about window seats in Pinner
Can you fit furniture in a home close to Hatch End station?
Yes, homes across Harrow and the rest of London are within the area we cover. To get started, you can drop us a line using the contact form with a few details about the room.
Is Pinner in the area you cover for window seats?
Yes. We cover all of Harrow and the rest of London, and Pinner is part of that. The first step is a design visit, where we measure and go through the design, followed by a quote.
Is an outside wall a problem for fitted furniture?
It can be done with some care: ventilation behind and inside the furniture helps avoid condensation and mould. We do not treat damp, so any damp should be sorted before fitting day.
What if my walls and floors are out of level?
Walls and floors that are not true are part of the job in older homes. We trim the edges to follow the wall and level the base, so there are no gaps at the sides.
Which is better under a window seat, a lid or drawers?
Often a mix works best. Drawers are easier for daily use, and a lid section holds larger things. In a child’s room, drawers tend to be simpler for small hands. We’ll suggest a layout at the measuring visit.
Can you build a window seat over a radiator?
Yes. A radiator under the window is common, and the seat is designed to work with it. A grille in the front lets the heat into the room. Storage above a radiator stays warm, so it suits things that don’t mind that.
What it costs
The price for your room depends on:
- Awkward walls, sloping ceilings and uneven floors
- Doors and drawers, and how many
- Access to the room, like stairs, lifts and narrow halls
- What goes inside: rails, shelves, drawers and dividers
The price comes in a written quote, worked out from the measurements and the design you choose. Bigger pieces use more board and take longer to make and fit, so size comes first. After that, the number of doors and drawers, the internal fittings and the finish all play a part.
What to send when you get in touch
The more you can tell us at the start, the better the design visit goes. When you get in touch, it helps to send:
- Where you live, with the postcode
- A few pictures of the space, taken from the doorway and from each corner
- What the furniture needs to hold
- Rough sizes: width, height and depth
It is useful to see the room before we come. Pictures of the whole wall, the corners and the ceiling line give us a good feel for the space, along with rough measurements. To send them over, fill in our short enquiry form, and we will arrange a design visit.
Neighbourhoods near Pinner
What else we make in Pinner
Could you do it yourself?
Where bespoke earns its keep is in rooms that are not square. In period homes, walls lean, floors slope and the alcoves on each side are often different widths, and standard units leave gaps.
Off-the-shelf furniture can be a sensible choice. If the walls are straight and the space suits standard sizes, it often does the job.
Window seats in Pinner: local notes
About 43% of the homes in the area around Pinner went up between 1919 and 1939, and about 28% between 1945 and 1972, based on the Valuation Office Agency’s 2025 council tax data. We take that into account at the design visit, since older and newer walls take different fixings. Near the centre of Pinner, Historic England’s list includes Sweetmans Hall (Grade II*), under half a mile north-east, and Church of St John the Baptist (Grade II*), about 0.5 miles east. Works inside a listed home that affect its character, for instance removing original joinery or fixing into it, may need listed building consent from the council. The council’s conservation officer is the person to ask before work starts. A quarter or more of the homes in the area around Pinner (about 28%) were built between 1945 and 1972, in the VOA’s 2025 council tax stock figures. Post-war homes often have wide windows with radiators below, and a seat over a radiator needs a grille so the heat still reaches the room.
For an older house near Christian Science Church, a radiator under the window just needs a grille in the seat front. For a family home near West Lodge Primary School, window seats can give school bags, shoes and sports kit a proper home. For a flat near Hatch End station, the route in is measured along with the room itself, and the sections are sized to fit it.
Pinner is about 2 miles south-east of Harrow, within the London Borough of Harrow. We can visit homes in Pinner on weekdays, or on a Saturday by arrangement. Pinner is one of 20 places on our list for Harrow.
Every address in HA5 is within our area for window seats, from the main roads to the quieter streets. You will find streets here such as Love Lane, Tudor Road and Marsh Road, and we cover homes on all of them for window seats. Other places close to Pinner include Pinner Green (1 mile north-west), Eastcote (1 mile south), North Harrow (1 mile south-east), Roxbourne (1 mile south) and Rayners Lane (2 miles south-east). Elsewhere in Harrow, we also cover Stanmore (4 miles east), Harrow Weald (2 miles east), Wealdstone (2 miles east), Little Stanmore (5 miles east), Greenhill (2 miles east) and South Harrow (3 miles south-east).
Around Pinner
The streets we cover here include those near The Oddfellows Arms, Pinner High School and Heathfield School and the streets around them. For rail, the closest station is Hatch End station, roughly 1.4 miles north-east of the centre. Nearby you’ll also find Northwood and Pinner Cottage Hospital (1.3 miles north-west) and Heath Robinson Museum (under half a mile south-east).
How fitting day works
Fitting day follows a set order: we protect the floors, bring the sections in, set them level, scribe them to the walls, fix them and finish them. Then the room is tidied and we look over the work with you. How long fitting takes depends on whether the seat has drawers, a lift-up lid or a radiator grille, and your quote sets out the fitting days. If you have a driveway, it can make unloading simpler, so let us know at the measuring visit. Otherwise, a visitor permit or a nearby bay helps. Doorways, stairs and floors are covered on the way in.
- You tell us about the window and the room.
- We measure the window, the cill and any radiator or shutters.
- The design is agreed and a written quote follows.
- Every part is made at our workshop, ready for a spray-painted or hand-painted finish. The materials are moisture-resistant MDF and birch plywood.
- The seat is fitted, scribed to the walls and checked with you. A radiator grille, if there is one, lets the heat through.
How to prepare
- Book any lift and let the concierge or building manager know
- Empty the space we will be working in
- Clear the hallway and stairs so the sections can come through
Arranging a design visit
Rough sizes are fine at the start. We measure everything properly at the measuring visit, including how level the floor and ceiling are. To arrange it, get in touch through our contact form. The written quote follows the visit.