Bespoke fitted furniture across all 32 London boroughs and the City

Example photo by Decima Athens on Unsplash, not our project

Barnet · London

Edgware Bespoke Kitchens

We make bespoke kitchens in moisture-resistant MDF and birch plywood for homes in Edgware. Each piece is finished by spray or by hand, in the colour you choose.

  • A kitchen island with room around it
  • Cabinets built around the appliances you choose
  • A painted kitchen in a colour you choose

Bespoke kitchens in Edgware

FAQs: bespoke kitchens in Edgware

Do you make bespoke kitchens for homes in Edgware?

Yes, we work across Barnet, Edgware included, and across the rest of London. To get started, you can use our contact form with a few details.

Can parking be tricky on fitting day in Edgware?

It depends on the street, as many London boroughs run controlled parking zones. A van may need a visitor permit, a pay-and-display bay or a suspended bay, which the council arranges, often with notice. Let us know what parking is near you at the measuring visit.

How are bespoke kitchens priced?

Every piece is quoted for your room after the design visit. Size, layout and finish all affect the price. To arrange a design visit, get in touch through our contact form.

Do I choose the paint colour?

You choose it. Spray and hand-painted finishes both use the colour you have chosen.

Which worktops and appliances can I have?

You choose the worktop, sink and appliances, and we design the cabinets around them. The materials and finish are agreed in your quote.

Can I send photos ahead of the visit?

Yes, they help. A few pictures of the room, from floor to ceiling, tell us a lot. You can send them when you message us from the contact page.

Bespoke kitchens in Edgware: what you get

We make kitchens to fit the room, not a catalogue of set sizes. Every unit is sized from careful measurements taken at the measuring visit, so there are no filler panels covering tricky gaps. The layout, storage and finish are planned with you, and the kitchen is made in our workshop before it is fitted. Typical reasons to get in touch are spray-painted or hand-painted cabinets and more storage in a small kitchen; the furniture is made from MDF made to resist moisture and birch plywood, then spray-painted or hand-painted.

Islands only work where there’s room to walk round them. Interwar, semi-detached and detached homes make up a big part of the housing around Edgware, and in an extended kitchen there may be space. The space around any island is measured at the measuring visit, along with where water and power would need to reach. Services to an island are for your plumber and electrician.

Our quotes are written in plain words. You’ll see what will be made, the boards used and the finish.

Location
Edgware (HA8, NW7, HA7)
Area
Barnet
Cost
Quoted for your room
How it starts
A design visit: we measure and talk it through
Where it’s made
Workshop-made, then fitted
Materials and finish
Painted MDF and birch ply
When we fit
Monday to Friday; Saturdays by arrangement
Enquiries
Our contact form
Page updated
27 October 2026
Illustration of a painted bespoke kitchen with tall cabinets and an island

What affects the price in Edgware

What you pay depends on:

  • How easy it is to get the furniture into the room
  • Doors and drawers, and how many
  • Spray painting or hand painting
  • Hanging rails, shelves, drawers and other fittings inside

Awkward rooms take more time: walls that lean, floors that slope and sloping ceilings all mean more scribing and cutting. The quote allows for it, which we write after seeing the room.

Before the design visit

There’s no need for exact sizes or plans. It’s enough to send:

  • Rough measurements, even if they’re only to the nearest few centimetres
  • The type of home and how the room is reached
  • Where you live, with the postcode
  • What you’d like to store or use the space for

Getting a quote starts with a few details: the room, rough measurements and some photos if you have them. To send them, tell us about the room on our contact form. We’ll then arrange a design visit and follow it with a written quote.

Why people ask for bespoke kitchens in Edgware

An extension or a knocked-through room is a common starting point. A new layout deserves a kitchen designed for it. The building work itself is for your builder.

A few of the things people ask us to solve include:

  • Spaces sized for your oven and fridge
  • A painted dresser for the kitchen
  • A kitchen island with room around it
  • A kitchen that fits an uneven room

Close to Stoneyfields Park? A tall cupboard for outdoor things can be part of the kitchen design.

Before you choose who makes it

  • Have they measured the stairs, lift and doorways?
  • Whether the quote follows a visit to your home
  • Will the quote be in writing?
  • Are the boards named, like MDF or plywood?

How to choose a carpenter in London

Fitting day, step by step

If anything comes up on the day, just ask. Most of the decisions were made during the design visit and set out in your quote, so the day itself is about careful fitting and leaving everything tidy. How long the fitting takes depends on how many units there are and how the room is laid out, and the fitting days are agreed in your quote. Some interwar and suburban streets have driveways, which can make unloading easier, so let us know at the measuring visit. Otherwise, a visitor permit or a nearby bay helps. Doorways, stairs and floors are covered on the way in.

  1. You get in touch with some details about the kitchen.
  2. The design visit covers measuring and planning the layout, where space allows.
  3. A quote in writing is sent to you.
  4. The kitchen is made at our workshop.
  5. We fit the kitchen in your home, while your plumber, a Gas Safe engineer and your electrician do the plumbing, gas and electrics. It helps to have those trades booked in good time.

Preparing the room

  • Check the building’s rules for trades and lift bookings
  • Make sure pets are kept safely away
  • Point out meters, boilers and fuse boards near the furniture

Ask for a quote

The quote is built from the design visit. We measure the room properly, check how the walls and floors run and go through the design with you. A quote in writing follows the visit, so you can take your time with it. To book one, send us a few details through our contact form.

Ask for a design visit

Advice

Made-to-measure kitchens in Edgware

The biggest shares of homes in the streets around Edgware were built between 1919 and 1939 (about 58%) and since 2000 (about 17%), according to Valuation Office Agency council tax figures (2025). Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Entries on the National Heritage List near the centre of Edgware include John Keble Church (Grade II), about 0.5 miles south-east. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, can require listed building consent. An early word with the council’s conservation officer is the best first step. Red routes, run by TfL, have strict rules on stopping and loading. If your street in Edgware joins a main road, it’s worth telling us at the design visit. We can then plan where the van will stop.

If your home is one of the older houses near St Andrew, a narrow back addition or an old chimney breast may shape the kitchen layout. If you live in a flat close to Mill Hill Broadway station, the route in is measured along with the room itself, and the sections are sized to fit it.

Edgware is part of the London Borough of Barnet, about 4 miles east of Finchley. Our work covers every London borough and the City of London, Edgware included. In Barnet, Edgware is one of the places we cover.

Postcode districts we cover here for bespoke kitchens: HA8, NW7 and HA7. We cover homes on streets such as Station Road, Edgware Road High Street and Hillcrest Avenue, along with the roads around them, whether you want bespoke kitchens or another piece made for the room. Main roads around Edgware include the A5100, and we plan where the van can stop before fitting day. Close by, we also work in The Hale (1 mile east), Broadfields Estate (1 mile north), Burnt Oak (1 mile south-east), Canons Park (1 mile south-west) and Little Stanmore (1 mile south-west). Across the rest of Barnet, our area takes in Finchley (4 miles east), Barnet (4 miles north-east), East Finchley (5 miles south-east), Hendon (3 miles south-east), Whetstone (4 miles east) and Friern Barnet (5 miles east).

Near you in Edgware

The streets we cover here include those near The Northgate School, London Academy and Railway Hotel, among other places. For rail, the closest station is Mill Hill Broadway station, about 1.1 miles south-east of the centre. Well-known places in the area include Edgware Community Hospital (0.9 miles south) and Broadwalk Centre (0.5 miles south-west). For a walk, there is Mill Hill Old Railway Nature Reserve.

Map of Edgware © OpenStreetMap contributors

Boards, parts and paint

Birch plywood

Deep pan drawers need a strong box, so birch plywood is a good choice.

Larder and dresser units

Larders and dressers can fill an alcove or end a run in a way standard units can’t.

Flats, blocks and rented homes

Leaseholders should check the lease before anything is fixed to the walls. A lease can require consent from the building owner for alterations, and that is best sorted before fitting day. We can’t give advice on leases.

Conversions and newer flats often have stud walls rather than solid brick. Fixings are chosen to suit whatever the wall is made of, after checking the walls during the design visit.

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City