Bespoke fitted furniture across all 32 London boroughs and the City

Southwark · London

Fitted cupboards in Herne Hill, Southwark

Fitted cupboards in Herne Hill: built-in cupboards for hallways, landings, utility rooms and boot rooms. Each piece is designed at a visit to your home, made at our workshop and fitted by us.

  • Making use of an tricky alcove or corner
  • A utility room with proper storage
  • A hallway cupboard for coats and shoes

Fitted cupboards designed for your room

How fitting works for fitted cupboards

Period rooms often have skirting boards, picture rails, cornices or coving for the furniture to meet. We cut and scribe the furniture around them on site, so it looks as though it was always there. How long fitting takes depends on the size of the cupboards and the room, and we confirm the fitting days in your quote. Original hallway tiles and old floorboards are worth protecting, so they’re covered before anything comes in. Drilling into lath and plaster is done with care, so the plaster around stays sound. Decorating around the furniture afterwards is for your decorator.

  1. You get in touch and describe the space.
  2. We visit to measure the space and the route in from the street, including the stairs and doorways. It helps to tell us about parking then, as a van usually needs a permit or a paid bay in a controlled parking zone.
  3. We send a written quote.
  4. In our workshop we build the cupboards in sections from moisture-resistant MDF and birch plywood.
  5. The sections are carried in, joined and set level. The finish is sprayed before fitting or painted by hand on site.

Before we arrive

  • Clear the hallway and stairs so the sections can come through
  • Tell us about any meters, fuse boards or boilers in the area
  • Book any lift and let the concierge or building manager know

Ask for a quote

Every quote follows a design visit. At the visit, we measure, look at the walls and floors and discuss the design with you, then send a quote in writing. Prices are quoted for your room, once we’ve measured and talked through the design. To book a design visit, fill in our short enquiry form.

Arrange a design visit

Related advice

Fitted cupboards for homes in Herne Hill

Boxing in a boiler is a job that needs care. The boiler maker’s instructions set out the clearances and ventilation it needs, and the cupboard is built to respect them. Doors open wide enough for servicing, and any work on the boiler itself is for a Gas Safe registered engineer. If you are living with a boiler cupboard that keeps access clear and space for laundry, cleaning things and boots, that’s what fitted cupboards are for, made from birch ply and moisture-resistant MDF, painted by hand or sprayed.

Original features like shutters, cupboard doors and panelling are worth keeping where they survive. Around Herne Hill, where homes from before 1919 make up a large share, fitted storage can be designed to sit alongside them. Door styles can be chosen to suit the age of the house, and painted to match. For a listed home, fixing into original joinery can need consent, so check first.

The quote comes in writing, so there’s time to read it properly and share it with anyone else involved. It records the design, the materials and the finish we discussed.

Location
Herne Hill (SE22, SW2, SE24)
Borough
Southwark
Prices
Quoted for your room
First step
We visit, measure, then quote
Where it is made
Workshop-made, then fitted
Boards and paint
Painted MDF and birch ply
When we fit
Weekdays; Saturdays on request
Enquiries
Our contact form
Page updated
27 October 2026
Illustration of a fitted utility cupboard with shelves and a ventilated door

Made for the room, or bought in a box?

There is a place for both. For a square alcove and a tight budget, a ready-made unit may do the job. Where the room is tricky, the walls are uneven or you want the cupboard to look built in, fitted joinery is typically the better answer. The two recesses beside a chimney breast are seldom an identical size, and standard units bought as a pair rarely suit both. Fitted furniture is made to each one separately.

We quote each job for the room it’s going into, after the design visit. The price depends mainly on the size of the piece, how many doors and drawers it has and what goes inside.

Why work with us in Herne Hill

  • Workshop-made and fitted by us
  • More than 300 projects completed
  • Every London borough and the City of London covered
  • Edges scribed to follow your walls

Take a look at how bespoke compares with ready-made or what a quote should include.

Common questions about fitted cupboards

Will a conservation area stop me having fitted cupboards fitted in Herne Hill?

Not normally. Conservation area controls are mostly concerned with the outside of buildings, so fitted furniture inside a house doesn’t normally need planning permission. Listed buildings are different, as works inside that affect their character may need listed building consent from the council. If you’re unsure, the council can confirm.

My house in Herne Hill is Victorian. Can you deal with uneven walls?

Yes. Walls in older houses are rarely flat or square, and floors are often out of level, so each piece is scribed to follow the wall and set level on a plinth or adjustable feet. Skirting, picture rails and cornices are met neatly or cut around. Older walls can be solid brick or lath and plaster, and the fixings are chosen to suit.

What happens during the design visit?

It is a chance to measure properly and talk through what you’d like. We look at the walls, floors and anything the furniture has to work around, then send a quote in writing.

Do I need to be in when you fit?

We need access, so someone has to let us in. After that, you do not need to stay in the room, but it helps to be around at the end.

How is the furniture painted?

You can choose between two finishes: spray painted or hand painted. Spray painting gives a smooth, even finish, and hand painting is easy to touch up.

Who chooses the colour?

The choice is yours, and we agree it with you before the furniture is finished. Spray and hand-painted finishes both use the colour you’ve chosen.

Fitted cupboards for homes in Herne Hill

Homes built before 1919 make up about 59% of the housing in the neighbourhood around Herne Hill, with about 16% built between 1945 and 1972, according to Valuation Office Agency council tax figures (2025). Knowing roughly when a home was built helps, because walls and fixings change from one era to the next. Entries on the National Heritage List near the centre of Herne Hill include Church of St Paul (Grade II*), less than half a mile west, and Half Moon Public House (Grade II*), under half a mile south-west. Listing covers the inside of a building as well as the outside, so works that affect a listed home’s character, like removing original joinery, may need listed building consent. An early word with the council’s conservation officer is the best first step. About 59% of homes in the area around Herne Hill were built before 1919, based on the Valuation Office Agency’s 2025 council tax data. Houses of that age have lots of recesses, from hallway nooks to alcoves, and walls that are rarely straight.

If you live near Belair Park, living near green space often means muddy boots, bikes and outdoor kit, and fitted cupboards can give those things a place. The wider area includes historic houses such as Kingswood House, about 1.7 miles south. For a period home anywhere nearby, an old boiler or airing cupboard can be rebuilt with proper shelves. If you live in a period home close to Saint Faith's, a landing recess can take a linen cupboard built to its exact size.

Herne Hill is within the London Borough of Southwark, about 1 mile north-east of East Dulwich. Herne Hill is part of the area we cover. Herne Hill is one of 21 places on our list for Southwark.

Every address in SE22, SW2 and SE24 is within our area for fitted cupboards, from the main roads to the quieter streets. We cover homes on streets such as Jelf Road, Dewey Lane and Talma Road, along with the roads around them, whether you want fitted cupboards or another piece made for the room. Herne Hill is near the A204 and A2214, so if your home is on a main road, mention it when you get in touch. If you’re just outside Herne Hill, we also cover Dulwich Village (1 mile south-east), East Dulwich (1 mile north-east), Dulwich (1 mile south-east), Denmark Hill (1 mile north) and Camberwell (1 mile north). We also make fitted cupboards in nearby places such as Bermondsey (3 miles north), Elephant and Castle (3 miles north), Bankside (4 miles north), Southwark (3 miles north), St George's Fields (3 miles north) and Newington Butts (3 miles north). As one of the bigger places in Southwark, Herne Hill is covered for all of our fitted furniture.

Landmarks near Herne Hill

We fit furniture in homes around The Charter School, Half Moon pub and The Charter School and the streets around them. Herne Hill has its own railway station: North Dulwich station. Other landmarks nearby include Dulwich Community Hospital (0.6 miles north-east) and House of Dreams Museum (0.7 miles north-east). Green spaces nearby include Centre for Wildlife Gardening and Knight's Hill.

Map of Herne Hill © OpenStreetMap contributors

Tips worth knowing

Most of what helps is simple. What we’d suggest:

  • List what you want to store before the design visit
  • Mention any boiler, meter or fuse board early
  • Deal with any damp walls first
  • Think about how the cupboards will get in

We adjust the doors as part of the fitting. Houses move a little with the seasons, so the hinges allow small adjustments later. If a door catches, it’s normally a small hinge adjustment.

It helps to list what you want to store before we measure. Coats, shoes, cleaning things and bedding all need different depths and fittings, so it is useful to know this early.

Flats, leases and landlords

Leaseholders should check the lease before anything is fixed to the walls. A lease can require consent from the building owner for alterations. We cannot advise on your lease, so check it yourself or ask your managing agent.

In a flat, the route in matters as much as the room. At the design visit, we measure the stairs, the landings, any lift and the doors, so each section is sized to get through.

Flat-pack or bespoke?

Shop-bought shelves can sag over a long span. Span, depth and the weight on it decide whether a shelf sags, so a long run needs a thicker shelf, a stiffening lip or a support. We design shelves with that in mind.

Off-the-shelf furniture can be a sensible choice. In a room with square walls and standard sizes, it can work well.

300+ projectsCompleted in London homes
Design visit firstWe measure, then quote
Workshop-madeThen fitted in your home
MDF and birch plywoodMoisture-resistant MDF
Painted finishesSpray or hand-painted
All of London32 boroughs and the City